Fence installation cost by size
The biggest driver is size: 25 linear ft costs $670-$1,100 in Aurora, while 400 linear ft costs $7,790-$13,170, about 1084% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 25 linear ft | $670-$1,100 |
| 50 linear ft | $1,150-$1,900 |
| 100 linear ft | $2,100-$3,510 |
| 150 linear ftMost common | $3,050-$5,120 |
| 200 linear ft | $4,000-$6,730 |
| 300 linear ft | $5,890-$9,950 |
| 400 linear ft | $7,790-$13,170 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Aurora, farm wire or electric comes in about 72% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $3,050-$5,120).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $810-$1,510 | $4.09-$8.15 installed |
| Split rail (2-3 rail) | $1,540-$2,270 | $8.93-$13.18 installed |
| Chain link, 4 ft galvanized | $2,500-$3,690 | $15.37-$22.64 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,050-$5,120 | $19.00-$32.21 installed |
| Wood picket, 4 ft | $3,270-$4,640 | $20.48-$28.98 installed |
| Cedar privacy, 6 ft | $3,740-$5,730 | $23.59-$36.26 installed |
| Vinyl privacy, 6 ft | $3,910-$6,300 | $24.74-$40.08 installed |
| Steel ornamental, 4-5 ft | $4,380-$6,670 | $27.91-$42.56 installed |
| Aluminum ornamental, 4-5 ft | $4,580-$6,660 | $29.22-$42.45 installed |
| Composite privacy, 6 ft | $6,420-$10,010 | $41.46-$64.77 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Aurora fence cost?
We have already loaded Aurora prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 4 extras are where quotes most often grow. The largest single line in Aurora is "Drive gate (double)" at $1,370-$3,150 each, so ask whether it is included.
- Walk gate$339-$647 / each
- Drive gate (double)$1,370-$3,150 / each
- Remove old fence$4.14-$5.38 / linear ft
- Sloped or rocky ground (extra per ft)$2.73-$4.53 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Aurora different for this job
Aurora homes and the local housing stock
Who builds fences in Aurora
75% of Aurora units are houses with their own lots, and 66% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
Against the $274,800 median home value, a typical new fence in Aurora costs about 1.5% of the house. That ranks 51st of 147 markets, with 1st the most expensive relative to home values.
Aurora permit fees for this job
Permit fees: what Aurora charges
Aurora's fence permit has two parts: an inspection fee of 1.25% of the installation cost and a review fee with a $51 minimum. A $6,000 fence totals about $126.
Put another way, the permit adds about 3.0% to a typical new fence in Aurora. Aurora has the 6th highest fence permit cost of the 31 cities we priced. In Rockford, the same job's permit is about $110, so Aurora charges more than Rockford.
Of the three, Aurora is where a new fence takes the biggest bite of a home's value: 1.5% of the median home, against 0.8% in Naperville and 1.2% in Chicago. That's mostly lower home values, not higher prices.
If you're comparing new fence bids from Naperville or Chicago with bids from Aurora, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| Aurora | $4,085 | 1.5% | +6% (state figure) | $126 |
| Naperville | $4,085 | 0.8% | +6% (state figure) | Not published |
| Chicago | $4,085 | 1.2% | +6% (state figure) | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Aurora Fence Installation Pricing — 2026 Local Market
Fence installation cost in Aurora, IL: $3,050-$5,120 (typical job: 150 linear ft).
Fence posts and rules in Aurora
NOAA's climate normals count about 142 freezing nights a year in Aurora, against 122 at the median Illinois station and 124 at the median U.S. station.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Call 811 a few days before digging so buried utility lines get marked; it's free.
| Nights at or below 32°F | 142 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Illinois) | No state general contractor license; cities license (e.g., Chicago) |
| Where to check a license | Illinois IDFPR (roofing); city for other trades |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Aurora
Fence rules in Aurora
| Rule | Value |
|---|---|
| Permit needed | Permit required for all new and replacement fences |
Permits for fences, driveways and patios in Aurora
City rule
In Aurora, Illinois, the city's local amendments to its building and residential codes require a permit to construct, erect, install or enlarge a fence and to construct any driveway. A permit is also required to install private walks, patios or parking pads next to a driveway that can hold parked vehicles, and to build or change pavement in the public right-of-way, such as sidewalks, aprons, curbs and curb cuts.
Aurora's residential code also exempts some small projects based on material and labor cost; ask the city's building official whether that exemption applies to a specific fence, driveway or patio project.
Aurora Code of Ordinances, Ch. 12, Secs. 12-17.1 and 12-17.6 (2024 building and residential code amendments) · Checked October 13, 2026
How Aurora compares with nearby cities
Labor rates
On a fence installation job in Aurora, fence erectors earn a median $24.38 an hour. After insurance, payroll taxes and overhead, contractors bill about $49-$63 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Aurora
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Aurora, IL?
Fence installation cost in Aurora, IL: $3,050-$5,120 (typical job: 150 linear ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Chicago-Naperville-Elgin area compare with the national median?
Median pay for construction laborers in the Chicago-Naperville-Elgin, IL-IN metro area is 29% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Kane County?
NOAA logged 262 thunderstorm wind reports of 58 mph or more in Kane County from 2016 to 2025.
How much snow does Aurora get in a typical year?
About 27.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Aurora prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://www.aurora-il.org
- City of Aurora, Permit Process FAQ, checked 2026-10-26 (https://www.aurora-il.org/2495/Permit-Process)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- City of Aurora, Permit and Fencing Information. https://www.aurora-il.org (retrieved 2026-10-26)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Illinois IDFPR (roofing); city for other trades source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Aurora (1.24×). How we estimate