Furnace replacement cost by size
Size moves the price more than anything else. In Georgia, going from 40,000 BTU to 120,000 BTU takes the job from $4,450-$7,260 to $5,320-$9,010, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,450-$7,260 |
| 60,000 BTU | $4,660-$7,700 |
| 80,000 BTUMost common | $4,880-$8,140 |
| 100,000 BTU | $5,100-$8,570 |
| 120,000 BTU | $5,320-$9,010 |
Furnace replacement cost by material or type
Material choice is the second big lever in Georgia. Electric furnace runs $3,180-$5,590, about 33% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $6,730-$10,780.
What will your Georgia furnace cost?
We have already loaded Georgia prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
State conditions
Local planning note for Georgia
How Georgia's cities differ for this job
For furnace replacements, pay for HVAC technicians ranges from 15% below the U.S. median in Savannah to 3% below the U.S. median in Atlanta, a 12-point gap that shows up most in labor-heavy bids. Marietta has the steepest permit of the cities we could price ($110), and Savannah the lowest ($60).
Gas heat is most common in Marietta, where 60% of homes use it, and least common in Savannah (30%), so an all-electric quote is a bigger switch in Marietta. Home values change how big the bill feels: the typical job is 2.5% of the median home in Savannah but 1.5% in Marietta.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Atlanta | -3% | Not published | 40% | 1.5% |
| Marietta | -3% | $110 | 60% | 1.5% |
| Savannah | -15% | $60 | 30% | 2.5% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
On a furnace replacement job in Georgia, HVAC technicians earn a median $27.11 an hour. After insurance, payroll taxes and overhead, contractors bill about $54-$70 per worker-hour.
Before you sign in Georgia
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for Georgia
Mechanic's liens and lien waivers in Georgia
Anyone who works on a furnace replacement or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. Georgia caps liens at the unpaid contract balance, and a lien is dissolved if, at final payment, you hold a written waiver or the contractor's sworn statement that everyone was paid and no lien is on record (O.C.G.A. 44-14-361.2).
Use Georgia's statutory interim and final waiver forms (44-14-366). Waivers signed in advance of payment are void. On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in Georgia?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Georgia?
Yes. Pay for HVAC technicians runs from 15% below the national median in Savannah to 3% below in Atlanta (BLS, May 2025).
Who licenses furnace installers in Georgia?
In Georgia: conditioned air contractor license (Class I or II). Look the contractor up with the Georgia Secretary of State licensing boards before you sign.
Would a heat pump cost less to run than a gas furnace in Georgia?
Furnace replacement cost in Georgia: $4,880-$8,140 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded Georgia prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Georgia Power, checked 2026-10-26 (https://www.georgiapower.com/residential/solutions/home-solutions/heip.html)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- Levelset, Georgia lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/georgia-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE