Siding Replacement Cost in Georgia: 2026 City-by-City Guide

Typical Georgia job · 1,500 sq ft of siding
$7,340-$9,23012% below U.S.

In Georgia, 1,500 sq ft of new siding usually costs $7,340-$9,230, 12% under the U.S. figure.

Labor is a big part of any siding replacement bill, and carpenters in Georgia earn about 19% less than the U.S. median.

Your options

Budget
Vinyl lap siding
$7,340-$9,230
Most common
Vinyl lap siding
$7,340-$9,230
Premium
Brick veneer
$17,580-$27,090
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Siding replacement cost by size

The biggest driver is size: 1,000 sq ft of siding costs $5,060-$6,410 in Georgia, while 3,000 sq ft of siding costs $14,180-$17,680, about 178% more. Ask every contractor to quote the same measured size.

SizeCost
1,000 sq ft of siding$5,060-$6,410
1,500 sq ft of sidingMost common$7,340-$9,230
2,000 sq ft of siding$9,620-$12,040
2,500 sq ft of siding$11,900-$14,860
3,000 sq ft of siding$14,180-$17,680
Cost by material

Siding replacement cost by material or type

In Georgia, vinyl lap siding is already the lowest-cost choice, at $7,340-$9,230; stepping up to brick veneer costs about 2.7 times as much ($17,580-$27,090).

What will your Georgia siding job cost?

We have already loaded Georgia prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Atlanta$7,450-$9,370Atlanta
Marietta$7,450-$9,370Marietta
Savannah$6,960-$8,740Savannah
State conditions

State conditions

Local planning note for Georgia

Georgia city by city: what actually changes

BLS figures put a 10-point spread in carpenters' pay across Georgia: Atlanta at 16% below the U.S. median, Savannah at 26% below the U.S. median, and labor is a large part of siding jobs. Atlanta has the steepest permit of the cities we could price ($175), and Marietta the lowest ($125).

FEMA's strong-wind rating runs from Relatively Moderate in Chatham County (Savannah) to Relatively High in Fulton County (Atlanta); in the higher-rated counties, ask for the product's wind rating. Next to what homes are worth, Savannah is the most expensive place in Georgia to do this job (3.2% of the median home value) and Marietta the least (1.9%).

CityPay for carpenters vs U.S.Remodel permit ($15,000 job)FEMA strong-wind risk (county)Typical job as share of median home value
Atlanta-16%$175Relatively High1.9%
Marietta-16%$125Relatively Moderate1.9%
Savannah-26%$150Relatively Moderate3.2%

Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.

Labor

Labor rates

On a siding replacement job in Georgia, carpenters earn a median $23.72 an hour. After insurance, payroll taxes and overhead, contractors bill about $47-$62 per worker-hour.

Before you sign

Before you sign in Georgia

Get every quote to include

  • material, profile, measured area, and finish
  • removal, substrate repairs, and water-resistive barrier work
  • flashing, trim, penetrations, and disposal
  • whether property-specific historic or design review is in scope

Local planning note for Georgia

How Georgia lien law affects a siding job

If a sub or supplier on your siding job isn't paid, the law may let them file a lien on the house even when you paid your contractor. Georgia caps liens at the unpaid contract balance, and a lien is dissolved if, at final payment, you hold a written waiver or the contractor's sworn statement that everyone was paid and no lien is on record (O.C.G.A. 44-14-361.2).

Use Georgia's statutory interim and final waiver forms (44-14-366). Waivers signed in advance of payment are void. Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.

Common questions

Frequently Asked Questions

What does siding replacement cost in Georgia?

They are planning estimates, not contractor bids.

Does pay for carpenters vary across Georgia?

Yes. Pay for carpenters runs from 26% below the national median in Savannah to 16% below in Atlanta (BLS, May 2025).

Do siding contractors need a license in Georgia?

You can confirm a license is active through the Georgia Secretary of State licensing boards.

Does hail damage siding in Georgia?

With 917 large-hail reports in ten years (NOAA), it's worth asking how each siding option handles impact.

Is wind a concern for siding in Georgia?

It is. NOAA logged 7,132 reports of 58-mph-plus wind in Georgia from 2016 to 2025. Ask for the siding's wind rating and the fastening pattern it requires.

Does Georgia's climate affect which siding to choose?

All of Georgia's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.

Ready for your own number?

We have already loaded Georgia prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • This Old House cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • Levelset, Georgia lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/georgia-lien-law-faqs/)

Installed: Vinyl lap siding

$7,340-$9,230NumeralQ planning estimate
Get my estimate