Insulation cost by size
Find your size in the table. In San Francisco the range runs from $850-$1,350 for 500 sq ft to $3,530-$5,640 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 500 sq ft | $850-$1,350 |
| 1,000 sq ftMost common | $1,520-$2,420 |
| 1,500 sq ft | $2,190-$3,490 |
| 2,000 sq ft | $2,860-$4,570 |
| 2,500 sq ft | $3,530-$5,640 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
In San Francisco, radiant barrier (attic) comes in about 24% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,520-$2,420).
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $1,120-$1,860 | $0.95-$1.59 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,520-$2,420 | $1.34-$2.15 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,520-$2,420 | $1.34-$2.15 installed |
| Fiberglass batts, walls (R-13) | $1,720-$2,210 | $1.54-$1.94 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,900-$4,400 | $1.72-$4.13 installed |
| Fiberglass batts, attic floor (R-30) | $2,210-$2,610 | $2.03-$2.34 installed |
| Spray foam, open-cell (3.5 in.) | $2,640-$3,830 | $2.46-$3.56 installed |
| Mineral wool batts (R-15) | $2,760-$3,830 | $2.59-$3.56 installed |
| Dense-pack cellulose, existing walls | $3,180-$4,330 | $3.00-$4.06 installed |
| Spray foam, closed-cell (2 in.) | $4,460-$6,230 | $4.28-$5.96 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your San Francisco insulation project cost?
We have already loaded San Francisco prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 2 extras are where quotes most often grow. The largest single line in San Francisco is "Air sealing (attic)" at $961-$1,390 for the job, so ask whether it is included.
- Remove old insulation$1.96-$2.61 / sq ft
- Air sealing (attic)$961-$1,390 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes San Francisco different for this job
San Francisco homes and the local housing stock
Insulation and the age of San Francisco's housing
San Francisco insulation jobs happen in homes older than those in the other 5 California markets on this site: half were built in 1946 or earlier, against 1977 there. San Francisco insulation jobs cover homes with a median of 4.0 rooms, not counting bathrooms or halls, against 4.6 for the other 5 California markets on this site.
Measured against the $1,394,500 median home value, a typical insulation job in San Francisco is about 0.1% of the house, the 2nd lowest share of the 147 markets on this site.
Half of San Francisco's homes were built by 1946, well before today's insulation targets, so attics here often hold far less than ENERGY STAR now recommends. Ask the installer to measure the existing depth first.
Local planning note for San Francisco
San Francisco, San Jose and Sacramento side by side
Against home values, an insulation job costs San Francisco and San Jose owners the same share, 0.1% of the median home, while Sacramento is at 0.3%.
Comparing San Francisco with its neighbors, BLS puts insulation workers' median pay 55% above the U.S. median in San Francisco but 2% below the U.S. median in Sacramento, a gap that tends to show up in insulation job quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| San Francisco | $1,970 | 0.1% | +55% |
| San Jose | $1,755 | 0.1% | +20% |
| Sacramento | $1,625 | 0.3% | -2% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
San Francisco Insulation Pricing — 2026 Local Market
Insulation cost in San Francisco, CA: $1,520-$2,420 (typical job: 1,000 sq ft).
How much insulation San Francisco homes need
For climate zone 3C (San Francisco County), ENERGY STAR suggests R49 to R60 of attic insulation.
A typical year in San Francisco brings 2,475 heating degree days and 200 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.
For comparison, the median station in California records 2,549 heating and 907 cooling degree days, and the U.S. median is 5,483 and 848.
California builds new homes to the 2025 California Energy Code (Title 24). For an existing attic, ask the installer to write the installed depth and R-value on the invoice.
| Climate zone (county) | 3C |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 2,475 / 200 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (California) | CSLB license unless under $1,000, no permit and no employees |
| Where to check a license | California Contractors State License Board |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for San Francisco
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
How San Francisco compares with nearby cities
Labor rates
For insulation in San Francisco, contractors bill about $73-$95 per worker-hour for insulation workers, whose median pay is $36.62 an hour. The difference covers insurance, taxes, overhead and profit.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in San Francisco
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in San Francisco
Insulation installers per home in San Francisco County
Census business counts for 2023 show 26 drywall and insulation contractors based in San Francisco County, the pool most San Francisco homeowners draw on for an insulation job. That's 0.6 per 10,000 homes, 54% below the U.S. rate of 1.4, the 14th lowest among the 135 counties on this site. The Census counts drywall and insulation firms together, so not every one of them does insulation.
Fewer insulation installers per home can mean longer waits in busy months, so book an insulation job in San Francisco early and consider firms from neighboring counties.
Frequently Asked Questions
How much does Insulation cost in San Francisco, CA?
Insulation cost in San Francisco, CA: $1,520-$2,420 (typical job: 1,000 sq ft). The table above breaks it out by option.
How does pay for construction laborers in the San Francisco-Oakland-Fremont area compare with the national median?
Median pay for construction laborers in the San Francisco-Oakland-Fremont, CA metro area is 55% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in San Francisco?
About 76% were built before 1980, according to the Census Bureau, against 56% across California and 50% nationally.
How do most San Francisco homes heat?
About 55% heat mainly with piped gas and 36% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded San Francisco prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- PG&E, checked 2026-10-26 (https://www.pge.com/en/save-energy-and-money/rebates-and-incentives.html)
- State of California (CPUC), checked 2026-10-26 (https://techcleanca.com/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- ENERGY STAR, recommended home insulation R-values by climate zone (https://www.energystar.gov/saveathome/seal_insulate/identify-problems-you-want-fix/diy-checks-inspections/insulation-r-values)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
- California Contractors State License Board source
We start from a national baseline and adjust it for San Francisco (1.35×). How we estimate