Insulation cost by size
Find your size in the table. In Irvine the range runs from $670-$1,120 for 500 sq ft to $2,860-$4,770 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 500 sq ft | $670-$1,120 |
| 1,000 sq ftMost common | $1,220-$2,030 |
| 1,500 sq ft | $1,770-$2,940 |
| 2,000 sq ft | $2,310-$3,860 |
| 2,500 sq ft | $2,860-$4,770 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
In Irvine, radiant barrier (attic) comes in about 26% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,220-$2,030).
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $870-$1,520 | $0.74-$1.32 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,220-$2,030 | $1.10-$1.83 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,220-$2,030 | $1.10-$1.83 installed |
| Fiberglass batts, walls (R-13) | $1,400-$1,800 | $1.28-$1.60 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,690-$4,120 | $1.56-$3.92 installed |
| Fiberglass batts, attic floor (R-30) | $2,040-$2,380 | $1.91-$2.18 installed |
| Spray foam, open-cell (3.5 in.) | $2,130-$3,170 | $2.01-$2.97 installed |
| Dense-pack cellulose, existing walls | $2,430-$3,360 | $2.31-$3.16 installed |
| Mineral wool batts (R-15) | $2,560-$3,560 | $2.44-$3.36 installed |
| Spray foam, closed-cell (2 in.) | $3,680-$5,220 | $3.56-$5.02 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your Irvine insulation project cost?
We have already loaded Irvine prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every insulation job needs these, but ask about each one before you sign. In Irvine, the biggest line is "Air sealing (attic)" at $653-$987 for the job.
- Remove old insulation$1.27-$1.71 / sq ft
- Air sealing (attic)$653-$987 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes Irvine different for this job
Irvine homes and the local housing stock
Irvine homes and insulation
For insulation jobs in Irvine, start with the age of the house. The median home here dates to 2002; for the rest of California's covered cities it is 1976. By room count, the median Irvine home is about average: 4.6 rooms against 4.5 for the rest of California's covered cities, which sets the scope of most insulation jobs.
Because the median home dates to 2002, an Irvine attic usually has code-era insulation in it. Ask the installer to measure it, since topping up costs less than starting from bare joists.
At the midpoint of the range, the insulation job equals roughly 0.1% of Irvine's $1,191,500 median home value. 0 markets come out lower, so the price is small next to what homes here are worth.
Local planning note for Irvine
How Irvine compares with nearby cities
Against home values, an insulation job weighs about the same in Irvine, Los Angeles and San Diego: 0.1% of the median home here, 0.2% and 0.2% next door.
Getting insulation job bids from outside Irvine? The Los Angeles and San Diego pages below show the full price ranges there.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| Irvine | $1,625 | 0.1% | -1% |
| Los Angeles | $1,625 | 0.2% | -1% |
| San Diego | $1,630 | 0.2% | -1% (state figure) |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Irvine Insulation Pricing — 2026 Local Market
Insulation cost in Irvine, CA: $1,220-$2,030 (typical job: 1,000 sq ft).
How much insulation Irvine homes need
ENERGY STAR's attic recommendation for climate zone 3B, which covers Orange County, is R49 to R60.
NOAA's climate normals for a station near Irvine show 1,092 heating and 1,075 cooling degree days a year. Each degree day is one degree of daily average temperature below (heating) or above (cooling) 65°F.
For comparison, the median station in California records 2,549 heating and 907 cooling degree days, and the U.S. median is 5,483 and 848.
New construction in California follows the 2025 California Energy Code (Title 24); retrofit jobs are often not inspected, so get the installed R-value in writing.
| Climate zone (county) | 3B |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 1,092 / 1,075 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (California) | CSLB license unless under $1,000, no permit and no employees |
| Where to check a license | California Contractors State License Board |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Irvine
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
How Irvine compares with nearby cities
Labor rates
For insulation in Irvine, contractors bill about $47-$61 per worker-hour for insulation workers, whose median pay is $23.30 an hour, 1% below the U.S. median. The difference covers insurance, taxes, overhead and profit.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Irvine
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in Irvine
Contractor competition in Irvine
For insulating an attic or walls in Irvine, the local pool is 192 drywall and insulation contractors in Orange County (Census, 2023): 1.7 per 10,000 homes, above the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.
Competition for an insulation job in Irvine is close to typical, which keeps quotes in a fairly predictable band.
Frequently Asked Questions
How much does Insulation cost in Irvine, CA?
Insulation cost in Irvine, CA: $1,220-$2,030 (typical job: 1,000 sq ft). Each option in the price table above has its own range.
How does pay for construction laborers in the Los Angeles-Long Beach-Anaheim area compare with the national median?
Median pay for construction laborers in the Los Angeles-Long Beach-Anaheim, CA metro area is 1% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in Irvine?
About 21% were built before 1980, according to the Census Bureau, against 56% across California and 50% nationally.
How do most Irvine homes heat?
About 61% heat mainly with piped gas and 35% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded Irvine prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Southern California Edison, checked 2026-10-26 (https://www.sce.com/save-money/rebates-financial-assistance)
- State of California (CPUC), checked 2026-10-26 (https://techcleanca.com/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- ENERGY STAR source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
- California Contractors State License Board source
NumeralQ planning estimate. How we estimate