Fence Installation Cost in Irvine, CA: 2026 Local Guide

Typical Irvine job · 150 linear ft
$3,040-$5,110About the U.S. price

Plan on $3,040-$5,110 for 150 linear ft of new fence in Irvine, within a few percent of the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$800-$1,510
Most common
Wood privacy, 6 ft pressure-treated
$3,040-$5,110
Premium
Composite privacy, 6 ft
$6,410-$10,000
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Size moves the price more than anything else. In Irvine, going from 25 linear ft to 400 linear ft takes the job from $670-$1,090 to $7,780-$13,150, so have the size measured before comparing quotes.

SizeCost
25 linear ft$670-$1,090
50 linear ft$1,140-$1,900
100 linear ft$2,090-$3,500
150 linear ftMost common$3,040-$5,110
200 linear ft$3,990-$6,720
300 linear ft$5,880-$9,940
400 linear ft$7,780-$13,150

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Irvine. Farm wire or electric runs $800-$1,510, about 72% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,410-$10,000.

TypeTypical jobInstalled
Farm wire or electric$800-$1,510$4.06-$8.12 installed
Split rail (2-3 rail)$1,530-$2,260$8.90-$13.14 installed
Chain link, 4 ft galvanized$2,490-$3,670$15.30-$22.55 installed
Wood privacy, 6 ft pressure-treatedMost common$3,040-$5,110$18.96-$32.16 installed
Wood picket, 4 ft$3,250-$4,620$20.38-$28.85 installed
Cedar privacy, 6 ft$3,730-$5,720$23.55-$36.21 installed
Vinyl privacy, 6 ft$3,900-$6,290$24.71-$40.03 installed
Steel ornamental, 4-5 ft$4,370-$6,660$27.84-$42.47 installed
Aluminum ornamental, 4-5 ft$4,570-$6,650$29.19-$42.41 installed
Composite privacy, 6 ft$6,410-$10,000$41.42-$64.71 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Irvine fence cost?

We have already loaded Irvine prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every fence installation job needs these, but ask about each one before you sign. In Irvine, the biggest line is "Drive gate (double)" at $1,360-$3,140 each.

  • Walk gate$337-$644 / each
  • Drive gate (double)$1,360-$3,140 / each
  • Remove old fence$4.10-$5.33 / linear ft
  • Sloped or rocky ground (extra per ft)$2.72-$4.51 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Irvine different for this job

Irvine homes and the local housing stock

Who builds fences in Irvine

57% of Irvine units are houses with their own lots, and 44% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

High home values make the new fence a small slice in Irvine: about 0.3% of the $1,191,500 median home, the 3rd lowest among the 147 markets we price.

Local planning note for Irvine

Irvine next to Los Angeles and San Diego

Next to Los Angeles and San Diego, a new fence is the lightest lift in Irvine relative to home value, at 0.3% of the median home.

For a new fence in Irvine or next door, pay for fence installers is where the three split most: San Diego is 17% above the U.S. median and Irvine is 5% above the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Irvine$4,0750.3%+5%
Los Angeles$4,0750.4%+5%
San Diego$4,1900.5%+17% (state figure)

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Irvine Fence Installation Pricing — 2026 Local Market

Fence installation cost in Irvine, CA: $3,040-$5,110 (typical job: 150 linear ft).

Before you fence in Irvine

Irvine averages 0 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 18 across California weather stations and 124 across U.S. stations.

Freezing is rare here, so post depth is mostly about soil and fence height; ask how deep the posts go.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Irvine at a glance
Nights at or below 32°F0
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (California)CSLB license unless under $1,000, no permit and no employees
Where to check a licenseCalifornia Contractors State License Board

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Irvine

Fence rules in Irvine

RuleValue
Back and side yard6 ft without building permit (zoning limits still apply)
Permit neededbuilding permit for fences and walls over 6 ft above grade
Pool barrier60 in

Retaining wall plus fence max 10 ft street side, 12 ft rear; HOA approval may apply

Local risks for this work in Irvine

What Orange County's risks mean for the work

Irvine sits in Orange County, which carries a Relatively High rating for wildfire risk in FEMA's National Risk Index. NFPA counts anything attached to the house as part of the home in a wildfire, and the first 5 feet should not burn. A metal or masonry section where the fence meets the house keeps a wood fence from carrying fire to the wall.

Permits in Irvine

The City of Irvine doesn't require a permit for fences under 6 feet. In practice the stricter rulebook here is usually the homeowners association, which often sets the material, color and style of village walls and fences.

Fence heights and materials in Irvine

In Irvine residential areas, fences and walls in the front setback may be no higher than 2.5 feet at the property line, rising 1 foot for every 3 feet of setback to a maximum of 7 feet, and walls or fences over 7 feet need a building permit. Barbed wire, electrically charged fences, plain exposed concrete block, plastic materials, chain link and grape stakes are prohibited.

Whether 'plastic materials' covers vinyl fencing was not confirmed, so ask the city before choosing vinyl; HOA rules may add limits.

Irvine Zoning Ordinance Sec. 3-35-2: Wall and fence requirements · Checked October 10, 2026

Nearby pricing

How Irvine compares with nearby cities

Labor

Labor rates

For fence installation in Irvine, contractors bill about $48-$63 per worker-hour for fence erectors, whose median pay is $24.18 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$24.18/hrMedian pay
$48-$63/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Irvine

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Irvine, CA?

Fence installation cost in Irvine, CA: $3,040-$5,110 (typical job: 150 linear ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Los Angeles-Long Beach-Anaheim area compare with the national median?

Median pay for construction laborers in the Los Angeles-Long Beach-Anaheim, CA metro area is 5% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Orange County?

NOAA logged 5 thunderstorm wind reports of 58 mph or more in Orange County from 2016 to 2025.

Ready for your own number?

We have already loaded Irvine prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

We start from a national baseline and adjust it for Irvine (1.29×). How we estimate

$3,040-$5,110NumeralQ planning estimate
Get my estimate