Concrete Driveway Cost in Irvine, CA: 2026 Local Guide

Typical Irvine job · 576 sq ft
$4,780-$6,5007% above U.S.

In Irvine, a 576 sq ft concrete driveway usually costs $4,780-$6,500, 7% over the U.S. figure.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$3,040-$4,570
Most common
Plain gray concrete, broom finish
$4,780-$6,500
Premium
Stained or saw-cut patterns
$9,860-$13,420
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

The biggest driver is size: 10 x 20 ft (1 car, short) costs $1,980-$2,790 in Irvine, while 10 x 100 ft (long single) costs $7,940-$10,680, about 290% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 20 ft (1 car, short)$1,980-$2,790
12 x 24 ft (1 car)$2,640-$3,660
20 x 20 ft (2 car, short)$3,470-$4,760
24 x 24 ft (2 car)Most common$4,780-$6,500
24 x 36 ft (3 car)$6,920-$9,340
10 x 100 ft (long single)$7,940-$10,680

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

The gap between options is wide: stained or saw-cut patterns costs about 2.1 times as much as plain gray concrete, broom finish in Irvine, and resurfacing overlay (on sound old slab) trims about 33%.

TypeTypical jobInstalled
Gravel (for comparison)$1,710-$2,780$2.11-$3.40 installed
Resurfacing overlay (on sound old slab)$3,040-$4,570$4.42-$6.51 installed
Asphalt (for comparison)$3,550-$5,170$5.30-$7.55 installed
Plain gray concrete, broom finishMost common$4,780-$6,500$7.44-$9.86 installed
Swirl or trowel finish$5,060-$6,860$7.93-$10.49 installed
Rock salt finish$5,310-$7,230$8.36-$11.14 installed
Exposed aggregate$5,840-$7,930$9.28-$12.35 installed
Colored concrete$5,840-$7,980$9.29-$12.44 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$6,120-$8,390$9.77-$13.14 installed
Pervious (porous) concrete$6,840-$9,480$11.02-$15.04 installed
Stamped concrete$8,580-$11,620$14.04-$18.76 installed
Pavers (for comparison)$9,540-$13,270$15.70-$21.62 installed
Stained or saw-cut patterns$9,860-$13,420$16.25-$21.88 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Irvine driveway cost?

We have already loaded Irvine prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 7 extras are where quotes most often grow. The largest single line in Irvine is "Apron / curb cut" at $866-$1,360 for the job, so ask whether it is included.

  • Remove old driveway$2.82-$3.90 / sq ft
  • Rebar grid (instead of mesh)$1.14-$2.42 / sq ft
  • Fiber reinforcement$0.53-$0.77 / sq ft
  • 6 in. slab instead of 4 in.$1.24-$1.66 / sq ft
  • Apron / curb cut$866-$1,360 / job
  • Heated driveway (hydronic or electric)$15.18-$24.56 / sq ft
  • Sealer$0.41-$0.56 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Irvine different for this job

Irvine homes and the local housing stock

Irvine homes and their driveways

In Irvine, a city of mostly houses (57% of units), a driveway is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

Measured against the $1,191,500 median home value, a typical new concrete driveway in Irvine is about 0.5% of the house, the 2nd lowest share of the 147 markets on this site.

Local planning note for Irvine

How Irvine compares with nearby cities

Against home values, a new concrete driveway weighs about the same in Irvine, Los Angeles and San Diego: 0.5% of the median home here, 0.6% and 0.6% next door.

If you're comparing new concrete driveway bids from Los Angeles or San Diego with bids from Irvine, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for concrete finishers vs U.S.
Irvine$5,6400.5%+12%
Los Angeles$5,6400.6%+12%
San Diego$5,7950.6%+17%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

When to plan this work in Irvine

Concrete weather in Irvine

ACI treats concrete work as cold-weather work when the air is expected to drop below 40°F while the slab cures. In Irvine, the average low stays above that all year at the Santa Ana John Wayne Airport weather station, so a driveway can be poured in any month without cold-weather protection most nights.

Irvine Concrete Driveway Pricing — 2026 Local Market

Concrete driveway cost in Irvine, CA: $4,780-$6,500 (typical job: 576 sq ft).

Driveway concrete for Irvine's climate

Irvine averages 0 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 18 at the median California station and 124 at the median U.S. station.

Freezing is limited here, so mix choice is mostly about strength and finish; ask the contractor to name the mix and its strength in the quote.

Driveway work that touches the curb or sidewalk usually needs a city right-of-way permit even when the slab itself does not.

Driveways in Irvine at a glance
Nights at or below 32°F0
Yearly snowfall (nearby station)0.0 in
Yearly precipitation11.2 in
Contractor license (California)CSLB license unless under $1,000, no permit and no employees
Where to check a licenseCalifornia Contractors State License Board

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Irvine compares with nearby cities

Labor

Labor rates

For concrete driveway in Irvine, contractors bill about $61-$80 per worker-hour for concrete finishers, whose median pay is $30.67 an hour. The difference covers insurance, taxes, overhead and profit.

Cement Masons and Concrete Finishers

$30.67/hrMedian pay
$61-$80/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Irvine

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included
Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Irvine, CA?

Concrete driveway cost in Irvine, CA: $4,780-$6,500 (typical job: 576 sq ft). The table near the top of the page prices each option separately.

How does pay for cement masons in the Los Angeles-Long Beach-Anaheim area compare with the national median?

Median pay for cement masons in the Los Angeles-Long Beach-Anaheim, CA metro area is 12% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Irvine get?

About 13 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Irvine in?

Orange County is in climate zone 3B on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Irvine prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

This estimate is NumeralQ's national baseline with a Irvine adjustment of 1.29×. How we estimate

$4,780-$6,500NumeralQ planning estimate
Get my estimate