Fence installation cost by size
Find your size in the table. In Milwaukee the range runs from $670-$1,100 for 25 linear ft to $7,820-$13,210 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $670-$1,100 |
| 50 linear ft | $1,150-$1,910 |
| 100 linear ft | $2,100-$3,520 |
| 150 linear ftMost common | $3,060-$5,140 |
| 200 linear ft | $4,010-$6,750 |
| 300 linear ft | $5,920-$9,980 |
| 400 linear ft | $7,820-$13,210 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in Milwaukee, and farm wire or electric trims about 71%.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $820-$1,530 | $4.14-$8.22 installed |
| Split rail (2-3 rail) | $1,550-$2,280 | $8.99-$13.25 installed |
| Chain link, 4 ft galvanized | $2,520-$3,710 | $15.48-$22.78 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,060-$5,140 | $19.06-$32.29 installed |
| Wood picket, 4 ft | $3,290-$4,670 | $20.64-$29.19 installed |
| Cedar privacy, 6 ft | $3,750-$5,750 | $23.66-$36.35 installed |
| Vinyl privacy, 6 ft | $3,920-$6,320 | $24.81-$40.16 installed |
| Steel ornamental, 4-5 ft | $4,400-$6,700 | $28.03-$42.72 installed |
| Aluminum ornamental, 4-5 ft | $4,590-$6,670 | $29.27-$42.52 installed |
| Composite privacy, 6 ft | $6,430-$10,020 | $41.54-$64.86 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Milwaukee fence cost?
We have already loaded Milwaukee prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every fence installation job needs these, but ask about each one before you sign. In Milwaukee, the biggest line is "Drive gate (double)" at $1,380-$3,160 each.
- Walk gate$342-$651 / each
- Drive gate (double)$1,380-$3,160 / each
- Remove old fence$4.19-$5.45 / linear ft
- Sloped or rocky ground (extra per ft)$2.76-$4.57 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Milwaukee different for this job
Milwaukee homes and the local housing stock
Milwaukee lots and fences
Only 43% of units in Milwaukee are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.
Set against the $184,000 median home value, the typical new fence in Milwaukee comes to roughly 2.2%. Only 15 of 147 markets come out higher, so it is a bigger decision relative to the house than in most cities.
Local planning note for Milwaukee
Milwaukee next to Madison and Green Bay
Set against what homes are worth, fencing a yard costs Milwaukee owners more than their neighbors: 2.2% of the median home value, compared with 1.1% in Madison.
If you're comparing new fence bids from Madison or Green Bay with bids from Milwaukee, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. |
|---|---|---|---|
| Milwaukee | $4,100 | 2.2% | +7% (state figure) |
| Madison | $4,100 | 1.1% | +7% (state figure) |
| Green Bay | $4,100 | 2.0% | +7% (state figure) |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Local rules and records for Milwaukee
Fence rules in Milwaukee
| Rule | Value |
|---|---|
| Front yard | 4 ft (6 ft ornamental if 50% open); 3 ft opaque in corner vision triangle |
| Permit needed | fence permit required ($60.40 total) |
| Setback | vision setback triangle 10-25 ft by district on corner lots |
Before you fence in Milwaukee
Milwaukee averages 123 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 160 across Wisconsin weather stations and 124 across U.S. stations.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 123 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Wisconsin) | Dwelling Contractor certification needed to pull a home permit |
| Where to check a license | Wisconsin DSPS |
Local data checked October 2026 · Sources at the bottom of the page
Exterior changes in Milwaukee historic districts
District/overlay only
Within a Milwaukee local historic district or on a designated historic property, no exterior changes may be made until the owner gets a Certificate of Appropriateness from the Historic Preservation Commission, regardless of other permit rules. For fences, a Certificate of Appropriateness is required before a fence permit can be issued, and the city suggests calling the Historic Preservation office before building or hiring.
Applies only to locally designated properties and districts.
Milwaukee DNS: Do I Need a Permit?; Fence Requirements - Residential (August 25, 2020) · Checked October 9, 2026
How Milwaukee compares with nearby cities
Labor rates
For fence installation in Milwaukee, contractors bill about $49-$64 per worker-hour for fence erectors, whose median pay is $24.72 an hour. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Milwaukee
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Milwaukee Mechanical and Site Permits
City rule
In Milwaukee, a permit is mandatory for installing air conditioners, furnaces, siding, solar panels, new or replacement fences, decks, and garages. Electrical work requires a permit and must be performed by a licensed contractor. Patio installations do not require a permit.
Applies to the City of Milwaukee only.
Do I need a permit? | Department of Neighborhood Services, City of Milwaukee · Checked October 9, 2026
Frequently Asked Questions
How much does Fence Installation cost in Milwaukee, WI?
Fence installation cost in Milwaukee, WI: $3,060-$5,140 (typical job: 150 linear ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Milwaukee-Waukesha area compare with the national median?
Median pay for construction laborers in the Milwaukee-Waukesha, WI metro area is 22% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Milwaukee County?
NOAA logged 57 thunderstorm wind reports of 58 mph or more in Milwaukee County from 2016 to 2025.
How much snow does Milwaukee get in a typical year?
About 48.7 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Milwaukee prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- City of Milwaukee - Residential Fence Permit Application, checked 2026-10-26 (https://city.milwaukee.gov/ImageLibrary/Groups/dnsAuthors/permits/Documents/Fence-Requirements---1---2-Family-Homes.pdf)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Wisconsin DSPS source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Milwaukee (1.03×). How we estimate