Furnace replacement cost by size
The biggest driver is size: 40,000 BTU costs $4,650-$7,530 in Wisconsin, while 120,000 BTU costs $5,520-$9,280, about 22% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,650-$7,530 |
| 60,000 BTU | $4,870-$7,970 |
| 80,000 BTUMost common | $5,090-$8,410 |
| 100,000 BTU | $5,310-$8,840 |
| 120,000 BTU | $5,520-$9,280 |
Furnace replacement cost by material or type
In Wisconsin, electric furnace comes in about 32% under gas furnace, 95-96% AFUE, and gas boiler, hot water (high efficiency) runs roughly 1.5 times the price, so get each option you are weighing priced on the same quote (gas furnace, 95-96% AFUE here: $5,090-$8,410).
What will your Wisconsin furnace cost?
We have already loaded Wisconsin prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
State conditions
Local planning note for Wisconsin
Comparing Wisconsin's cities beyond the price
For furnace replacements, pay for HVAC technicians ranges from 0% above the U.S. median in Green Bay to 4% above the U.S. median in Madison, a 3-point gap that shows up most in labor-heavy bids. Gas heat is most common in Milwaukee, where 78% of homes use it, and least common in Madison (67%), so an all-electric quote is a bigger switch in Milwaukee.
Home values change how big the bill feels: the typical job is 3.7% of the median home in Milwaukee but 1.8% in Madison.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Green Bay | 0% | Not published | 74% | 3.2% |
| Madison | +4% | Not published | 67% | 1.8% |
| Milwaukee | +3% | Not published | 78% | 3.7% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
For furnace replacement in Wisconsin, contractors bill about $59-$77 per worker-hour for HVAC technicians, whose median pay is $29.67 an hour, 1% above the U.S. median. The difference covers insurance, taxes, overhead and profit.
Before you sign in Wisconsin
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for Wisconsin
Mechanic's liens and lien waivers in Wisconsin
Anyone who works on a furnace replacement or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. A Wisconsin prime contractor must put a lien-rights notice in the contract or give it within 10 days of first work (Wis. Stat. 779.02(2)(a)), and subs serve their own notice within 60 days.
You may withhold payment to cover subs, and the prime must defend you against their liens (779.02(6)). On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in Wisconsin?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Wisconsin?
Not much. Across the 3 Wisconsin cities we cover, pay for HVAC technicians stays within a few points, from about the same as the national median in Green Bay to 3% above in Madison (BLS, May 2025).
Who licenses furnace installers in Wisconsin?
Wisconsin's rule is Registered HVAC contractor (DSPS). The Wisconsin DSPS has a free license lookup.
Would a heat pump cost less to run than a gas furnace in Wisconsin?
Furnace replacement cost in Wisconsin: $5,090-$8,410 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded Wisconsin prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- WI utilities, checked 2026-10-26 (https://focusonenergy.com/)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Levelset, Wisconsin lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/wisconsin-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE