Insulation Cost in Spokane, WA: 2026 Local Guide

Typical Spokane job · 1,000 sq ft
$1,360-$2,22010% above U.S.

In Spokane, insulating 1,000 sq ft usually costs $1,360-$2,220, 10% above the national typical job.

The median home in Spokane was built in 1961, and older attics and walls were often built with little or no insulation, so the gain from adding it is bigger.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$990-$1,680
Most common
Blown-in fiberglass, attic (R-38)
$1,360-$2,220
Premium
Spray foam, closed-cell (2 in.)
$4,050-$5,710
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

The biggest driver is size: 500 sq ft costs $760-$1,230 in Spokane, while 2,500 sq ft costs $3,180-$5,190, about 321% more. Ask every contractor to quote the same measured size.

SizeCost
500 sq ft$760-$1,230
1,000 sq ftMost common$1,360-$2,220
1,500 sq ft$1,970-$3,210
2,000 sq ft$2,580-$4,200
2,500 sq ft$3,180-$5,190

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

The gap between options is wide: spray foam, closed-cell (2 in.) costs about 2.7 times as much as blown-in fiberglass, attic (R-38) in Spokane, and radiant barrier (attic) trims about 25%.

TypeTypical jobInstalled
Radiant barrier (attic)$990-$1,680$0.84-$1.45 installed
Blown-in fiberglass, attic (R-38)Most common$1,360-$2,220$1.21-$1.98 installed
Blown-in cellulose, attic (R-38)Most common$1,360-$2,220$1.21-$1.98 installed
Fiberglass batts, walls (R-13)$1,550-$1,990$1.40-$1.76 installed
Rigid foam board (R-5 per inch, 2 in.)$1,790-$4,250$1.64-$4.02 installed
Fiberglass batts, attic floor (R-30)$2,120-$2,490$1.97-$2.26 installed
Spray foam, open-cell (3.5 in.)$2,370-$3,490$2.22-$3.25 installed
Mineral wool batts (R-15)$2,660-$3,690$2.51-$3.45 installed
Dense-pack cellulose, existing walls$2,790-$3,820$2.64-$3.59 installed
Spray foam, closed-cell (2 in.)$4,050-$5,710$3.90-$5.47 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Spokane insulation project cost?

We have already loaded Spokane prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 2 extras are where quotes most often grow. The largest single line in Spokane is "Air sealing (attic)" at $800-$1,180 for the job, so ask whether it is included.

  • Remove old insulation$1.59-$2.14 / sq ft
  • Air sealing (attic)$800-$1,180 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Spokane different for this job

Spokane homes and the local housing stock

Insulation and the age of Spokane's housing

Spokane insulation jobs happen in homes older than those in Bellevue, Seattle and Tacoma: half were built in 1961 or earlier, against 1976 there. Spokane insulation jobs cover homes with a median of 5.6 rooms, not counting bathrooms or halls, against 4.9 for Bellevue, Seattle and Tacoma.

The midpoint of the range above is about 0.5% of Spokane's $363,500 median home value, the 71st highest share for an insulation job among 147 markets and near the middle of the pack.

With the median home from 1961, many Spokane attics were insulated to the standards of their day, well below today's levels. A depth check before the quote tells you how much needs adding.

Local planning note for Spokane

How Spokane compares with nearby cities

Of the three, Spokane is where an insulation job takes the biggest bite of a home's value: 0.5% of the median home, against 0.1% in Bellevue and 0.2% in Seattle. That's mostly lower home values, not higher prices.

For an insulation job in Spokane or next door, pay for insulation workers is where the three split most: Bellevue is 46% above the U.S. median and Spokane is 26% above the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.

CityTypical job (midpoint)Share of median home valuePay for insulation workers vs U.S.
Spokane$1,7900.5%+26%
Bellevue$1,9150.1%+46%
Seattle$1,9150.2%+46%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Insulation targets for Spokane

For climate zone 5B (Spokane County), ENERGY STAR suggests R60 of attic insulation.

Spokane averages 6,463 heating degree days and 515 cooling degree days a year, according to NOAA's 1991–2020 climate normals. Degree days measure how much colder or warmer than 65°F each day runs, so they track heating and cooling need.

For comparison, the median station in Washington records 5,647 heating and 228 cooling degree days, and the U.S. median is 5,483 and 848.

New construction in Washington follows the 2021 Washington State Energy Code; retrofit jobs are often not inspected, so get the installed R-value in writing.

Insulation in Spokane at a glance
Climate zone (county)5B
ENERGY STAR attic levelR60
Heating / cooling degree days6,463 / 515
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Washington)L&I contractor registration with bond and insurance
Where to check a licenseWashington Department of Labor & Industries

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Spokane compares with nearby cities

Labor

Labor rates

For insulation in Spokane, contractors bill about $59-$77 per worker-hour for insulation workers, whose median pay is $29.66 an hour. The difference covers insurance, taxes, overhead and profit.

Insulation Workers, Floor, Ceiling, and Wall

$29.66/hrMedian pay
$59-$77/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Spokane

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Spokane

How many insulation installers work in Spokane's area

For insulating an attic or walls in Spokane, the local pool is 47 drywall and insulation contractors in Spokane County (Census, 2023): 2.0 per 10,000 homes, above the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

With that many firms competing, Spokane homeowners are in a good position to get several insulation job quotes and to compare them line by line.

Common questions

Frequently Asked Questions

How much does Insulation cost in Spokane, WA?

Insulation cost in Spokane, WA: $1,360-$2,220 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Spokane-Spokane Valley area compare with the national median?

Median pay for construction laborers in the Spokane-Spokane Valley, WA metro area is 26% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Spokane?

About 68% were built before 1980, according to the Census Bureau, against 43% across Washington and 50% nationally.

How do most Spokane homes heat?

About 54% heat mainly with piped gas and 42% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Spokane prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • ENERGY STAR, recommended home insulation R-values by climate zone (https://www.energystar.gov/saveathome/seal_insulate/identify-problems-you-want-fix/diy-checks-inspections/insulation-r-values)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

We start from a national baseline and adjust it for Spokane (1.09×). How we estimate

$1,360-$2,220NumeralQ planning estimate
Get my estimate