HVAC replacement cost by size
Find your size in the table. In Washington the range runs from $5,890-$9,450 for 1.5 tons to $12,950-$22,060 for 5 tons; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 1.5 tons | $5,890-$9,450 |
| 2 tons | $6,900-$11,250 |
| 2.5 tons | $7,900-$13,050 |
| 3 tonsMost common | $8,910-$14,850 |
| 3.5 tons | $9,920-$16,650 |
| 4 tons | $10,930-$18,460 |
| 5 tons | $12,950-$22,060 |
HVAC replacement cost by material or type
The gap between options is wide: dual-fuel (heat pump + gas furnace) costs about 1.1 times as much as central AC + gas furnace (split system) in Washington, and ductless mini-split, single zone trims about 63%.
What will your Washington HVAC system cost?
We have already loaded Washington prices for this HVAC replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
State conditions
Local planning note for Washington
How Washington's cities differ for this job
For HVAC replacements, pay for HVAC technicians ranges from 3% above the U.S. median in Spokane to 31% above the U.S. median in Bellevue, a 28-point gap that shows up most in labor-heavy bids. Heat-wave risk, per FEMA, is Relatively High in King County (Bellevue) but Relatively Moderate in Spokane County, a reason to insist on a proper load calculation where summers run hottest.
Next to what homes are worth, Spokane is the most expensive place in Washington to do this job (3.1% of the median home value) and Bellevue the least (0.9%).
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | FEMA heat-wave risk (county) | Typical job as share of median home value |
|---|---|---|---|---|
| Bellevue | +31% | Not published | Relatively High | 0.9% |
| Seattle | +31% | Not published | Relatively High | 1.3% |
| Spokane | +3% | Not published | Relatively Moderate | 3.1% |
| Tacoma | +31% | Not published | Relatively High | 2.5% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for Washington
Sales tax on an HVAC replacement in Washington
Washington treats building, repairing, or improving a house for a homeowner as a retail sale, so sales tax applies to the whole contract, labor included (RCW 82.04.050(2)(b); WAC 458-20-170). When comparing HVAC replacement quotes, check whether each one includes the tax or adds it at the bottom, or the cheapest-looking bid may not be.
Labor rates
For HVAC replacement in Washington, contractors bill about $73-$95 per worker-hour for HVAC technicians, whose median pay is $36.38 an hour. The difference covers insurance, taxes, overhead and profit.
Before you sign in Washington
Get every quote to include
- equipment model, capacity, efficiency, and documented load calculation
- ductwork, electrical, condensate, venting, and controls
- removal, startup, commissioning, and homeowner instructions
- who checks and documents any required permits or inspections
Local planning note for Washington
Washington's contractor recovery fund
If a contractor takes your money and can't pay a judgment, Washington's Homeowner Recovery Fund pays up to $25,000 to owner-occupants of 1-4 unit homes who win a court judgment against an L&I-registered contractor (RCW 18.27.410). Whatever the size of your HVAC replacement, pay by check or card rather than cash so each payment can be proved later.
Local planning note for Washington
How Washington lien law affects an HVAC replacement
A mechanic's lien is a claim against your house by someone who worked on your HVAC replacement or supplied material for it and wasn't paid. On an owner-occupied Washington home, subs and suppliers can be paid only from money you haven't yet paid the prime contractor when their notice reaches you (RCW 60.04.031(3)(b)).
On a repair over $1,000, the contractor must give you a disclosure statement before work or lose lien rights (18.27.114). Liens are due within 90 days. With an HVAC replacement, the supply house that sold the condenser and air handler is the lien claimant to watch for.
Frequently Asked Questions
What does HVAC replacement cost in Washington?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Washington?
Yes. Pay for HVAC technicians runs from 3% above the national median in Spokane to 31% above in Bellevue (BLS, May 2025).
Do HVAC contractors need a license in Washington?
Washington's rule is no state HVAC license; electrical work needs L&I electrical license. The Washington Department of Labor & Industries has a free license lookup.
Which refrigerant should a new AC use?
R-454B or R-32. EPA rules phased out R-410A in new home systems starting in 2025, so ask which refrigerant each quote uses.
What is the minimum AC efficiency allowed in Washington?
The Department of Energy sets 13.4 SEER2 for the North region, which includes Washington.
Ready for your own number?
We have already loaded Washington prices for this HVAC replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Puget Sound Energy, checked 2026-10-26 (https://www.pse.com/rebates)
- Seattle City Light, checked 2026-10-26 (https://www.seattle.gov/city-light/residential-services/home-energy-solutions)
- Tacoma Public Utilities, checked 2026-10-26 (https://www.mytpu.org/)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Washington L&I, checked November 10, 2026 (https://lni.wa.gov/licensing-permits/contractors/problems-with-a-contractor/homeowner-recovery-fund)
- RCW 82.04.050, checked November 10, 2026 (https://app.leg.wa.gov/RCW/default.aspx?cite=82.04.050)
- Levelset, Washington lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/washington-lien-law-faqs/)
Installed: Central AC + gas furnace (split system)