Fence installation cost by size
Size moves the price more than anything else. In Knoxville, going from 25 linear ft to 400 linear ft takes the job from $640-$1,060 to $7,580-$12,890, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 25 linear ft | $640-$1,060 |
| 50 linear ft | $1,110-$1,850 |
| 100 linear ft | $2,030-$3,430 |
| 150 linear ftMost common | $2,950-$5,000 |
| 200 linear ft | $3,880-$6,580 |
| 300 linear ft | $5,730-$9,740 |
| 400 linear ft | $7,580-$12,890 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in Knoxville, and farm wire or electric trims about 73%.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $740-$1,420 | $3.72-$7.67 installed |
| Split rail (2-3 rail) | $1,460-$2,160 | $8.50-$12.61 installed |
| Chain link, 4 ft galvanized | $2,360-$3,500 | $14.51-$21.51 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,950-$5,000 | $18.49-$31.56 installed |
| Wood picket, 4 ft | $3,060-$4,370 | $19.22-$27.35 installed |
| Cedar privacy, 6 ft | $3,640-$5,610 | $23.07-$35.58 installed |
| Vinyl privacy, 6 ft | $3,820-$6,180 | $24.23-$39.41 installed |
| Steel ornamental, 4-5 ft | $4,230-$6,480 | $27.00-$41.38 installed |
| Aluminum ornamental, 4-5 ft | $4,500-$6,560 | $28.81-$41.92 installed |
| Composite privacy, 6 ft | $6,320-$9,880 | $40.91-$64.05 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Knoxville fence cost?
We have already loaded Knoxville prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 4 extras are where quotes most often grow. The largest single line in Knoxville is "Drive gate (double)" at $1,290-$3,040 each, so ask whether it is included.
- Walk gate$314-$615 / each
- Drive gate (double)$1,290-$3,040 / each
- Remove old fence$3.70-$4.80 / linear ft
- Sloped or rocky ground (extra per ft)$2.51-$4.23 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Knoxville different for this job
Knoxville homes and the local housing stock
A fence against the value of a Knoxville home
57% of Knoxville units are houses with their own lots, and 47% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
At the midpoint of the range above, a typical new fence costs about 1.7% of Knoxville's $239,700 median home value, the 40th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.
Local planning note for Knoxville
Knoxville next to Chattanooga and Nashville
Set against what homes are worth, fencing a yard costs Knoxville owners more than their neighbors: 1.7% of the median home value, compared with 1.0% in Nashville.
For a new fence in Knoxville or next door, pay for fence installers is where the three split most: Nashville is 2% below the U.S. median and Chattanooga is 17% below the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. |
|---|---|---|---|
| Knoxville | $3,975 | 1.7% | -6% (state figure) |
| Chattanooga | $3,870 | 1.4% | -17% |
| Nashville | $4,010 | 1.0% | -2% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Stream buffer rules in Knoxville
Mapped hazard area only
For Knoxville properties next to streams, the city requires a riparian buffer zone measured from the top of the bank: at least 30 feet for waters draining less than 1 square mile and 60 feet for 1 square mile or more. Yards and landscaped areas are acceptable uses, but other disturbance of the buffer is prohibited except listed restoration work or permitted disturbances with approved mitigation.
The ordinance does not name fences or decks or say how it applies to existing developed lots, so ask Knoxville stormwater staff before building near a stream.
Knoxville Code Sec. 22.5-35 Riparian buffer zone · Checked October 10, 2026
Fence posts and rules in Knoxville
Knoxville averages 67 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 84 at the median Tennessee station and 124 at the median U.S. station.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 67 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Tennessee) | Contractor license at $25,000+; home improvement license $3,000-$25,000 in 9 counties |
| Where to check a license | Tennessee Board for Licensing Contractors |
Local data checked October 2026 · Sources at the bottom of the page
Fence height limits in Knoxville
City rule
In Knoxville, privacy fences and walls are limited to 42 inches from 5 feet behind the front building line forward to the front lot line, and in the corner side yard; open fences there have no height limit. In other yards, the zoning code sets no height limit on privacy or open fences, and fences may be built on lot lines except in the visibility triangle.
Corner lots must keep the visibility triangle clear, so check its location with Knoxville zoning staff.
Knoxville Zoning Code Art. 10.3.L Fences and Walls · Checked October 10, 2026
How Knoxville compares with nearby cities
Labor rates
On a fence installation job in Knoxville, fence erectors earn a median $21.79 an hour. After insurance, payroll taxes and overhead, contractors bill about $44-$57 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Knoxville
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Knoxville, TN?
Fence installation cost in Knoxville, TN: $2,950-$5,000 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Knoxville area compare with the national median?
Median pay for construction laborers in the Knoxville, TN metro area is 2% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Knox County?
NOAA logged 175 thunderstorm wind reports of 58 mph or more in Knox County from 2016 to 2025.
How much snow does Knoxville get in a typical year?
About 4.6 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Knoxville prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Tennessee Board for Licensing Contractors source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Knoxville (0.94×). How we estimate