Insulation cost by size
Find your size in the table. In Columbia the range runs from $690-$1,130 for 500 sq ft to $2,920-$4,840 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 500 sq ft | $690-$1,130 |
| 1,000 sq ftMost common | $1,240-$2,060 |
| 1,500 sq ft | $1,800-$2,990 |
| 2,000 sq ft | $2,360-$3,920 |
| 2,500 sq ft | $2,920-$4,840 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
Material choice is the second big lever in Columbia. Radiant barrier (attic) runs $890-$1,550, about 26% under blown-in fiberglass, attic (R-38), while spray foam, closed-cell (2 in.) costs $3,740-$5,310.
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $890-$1,550 | $0.76-$1.34 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,240-$2,060 | $1.12-$1.86 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,240-$2,060 | $1.12-$1.86 installed |
| Fiberglass batts, walls (R-13) | $1,430-$1,830 | $1.30-$1.63 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,700-$4,140 | $1.58-$3.94 installed |
| Fiberglass batts, attic floor (R-30) | $2,050-$2,400 | $1.92-$2.20 installed |
| Spray foam, open-cell (3.5 in.) | $2,170-$3,230 | $2.04-$3.02 installed |
| Dense-pack cellulose, existing walls | $2,490-$3,440 | $2.36-$3.23 installed |
| Mineral wool batts (R-15) | $2,580-$3,580 | $2.45-$3.38 installed |
| Spray foam, closed-cell (2 in.) | $3,740-$5,310 | $3.62-$5.10 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your Columbia insulation project cost?
We have already loaded Columbia prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every insulation job needs these, but ask about each one before you sign. In Columbia, the biggest line is "Air sealing (attic)" at $679-$1,020 for the job.
- Remove old insulation$1.32-$1.78 / sq ft
- Air sealing (attic)$679-$1,020 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes Columbia different for this job
Columbia homes and the local housing stock
Columbia homes and insulation
The typical Columbia house went up in 1980, 11 years before the median for the other South Carolina cities NumeralQ covers, which matters for insulation jobs. Room count drives the size of insulation jobs, and the median Columbia home has 5.1 (bathrooms excluded) compared with 5.0 for the other South Carolina cities NumeralQ covers.
The midpoint of the range above is about 0.6% of Columbia's $264,300 median home value, the 51st highest share for an insulation job among 147 markets and near the middle of the pack.
Most Columbia homes were built in 1980 or later, under an energy code, so attics usually have some insulation already. The job is often a top-up rather than a full install.
Local planning note for Columbia
Columbia next to Charleston and Greenville
Set against what homes are worth, insulating an attic or walls costs Columbia owners more than their neighbors: 0.6% of the median home value, compared with 0.3% in Charleston.
Comparing Columbia with its neighbors, BLS puts insulation workers' median pay 3% above the U.S. median in Columbia but 18% below the U.S. median in Charleston, a gap that tends to show up in insulation job quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| Columbia | $1,650 | 0.6% | +3% |
| Charleston | $1,520 | 0.3% | -18% |
| Greenville | $1,610 | 0.3% | -4% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Columbia Insulation Pricing — 2026 Local Market
Insulation cost in Columbia, SC: $1,240-$2,060 (typical job: 1,000 sq ft).
Columbia's climate and insulation
For climate zone 3A (Richland County), ENERGY STAR suggests R49 to R60 of attic insulation.
Columbia averages 2,210 heating degree days and 2,418 cooling degree days a year, according to NOAA's 1991–2020 climate normals. Degree days measure how much colder or warmer than 65°F each day runs, so they track heating and cooling need.
The median South Carolina weather station logs 2,646 and 1,950; the median U.S. station, 5,483 and 848.
South Carolina builds new homes to the 2009 IECC with state changes. For an existing attic, ask the installer to write the installed depth and R-value on the invoice.
| Climate zone (county) | 3A |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 2,210 / 2,418 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (South Carolina) | Residential builder license over $5,000; specialty registration over $500 |
| Where to check a license | SC Residential Builders Commission (LLR) |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Columbia
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
How Columbia compares with nearby cities
Labor rates
On an insulation job in Columbia, insulation workers earn a median $24.40 an hour, 3% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $49-$63 per worker-hour.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Columbia
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in Columbia
Insulation installers per home in Richland County
For insulating an attic or walls in Columbia, the local pool is 16 drywall and insulation contractors in Richland County (Census, 2023): 0.8 per 10,000 homes, 38% below the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.
Fewer insulation installers per home can mean longer waits in busy months, so book an insulation job in Columbia early and consider firms from neighboring counties.
COLUMBIA Ductwork Rebates
Utility service territory
For Dominion Energy South Carolina customers, dominion Energy South Carolina provides ductwork rebates for duct sealing, duct insulation, or complete replacement for residential electric customers. Duct improvements must be completed by a Licensed Mechanical Contractor. The process requires duct leakage testing using a duct blaster both before and after sealing. Applications with detailed invoices must be submitted within 90 days of installation.
For Dominion Energy South Carolina electric residential customers only.
Ductwork rebates - Dominion Energy South Carolina · Program terms as of October 2026
Frequently Asked Questions
How much does Insulation cost in Columbia, SC?
Insulation cost in Columbia, SC: $1,240-$2,060 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Columbia area compare with the national median?
Median pay for construction laborers in the Columbia, SC metro area is 3% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in Columbia?
About 50% were built before 1980, according to the Census Bureau, against 33% across South Carolina and 50% nationally.
How do most Columbia homes heat?
About 26% heat mainly with piped gas and 72% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded Columbia prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Dominion Energy South Carolina, checked 2026-10-26 (https://www.dominionenergy.com/south-carolina/save-energy)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- ENERGY STAR source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
- SC Residential Builders Commission (LLR) source
NumeralQ planning estimate. How we estimate