Concrete Driveway Cost in Tulsa, OK: 2026 Local Guide

Typical Tulsa job · 576 sq ft
$3,910-$5,37012% below U.S.

Most Tulsa homeowners pay $3,910-$5,370 for a 576 sq ft concrete driveway, 12% under the U.S. figure.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$2,440-$3,790
Most common
Plain gray concrete, broom finish
$3,910-$5,370
Premium
Stained or saw-cut patterns
$7,800-$10,750
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

The biggest driver is size: 10 x 20 ft (1 car, short) costs $1,640-$2,340 in Tulsa, while 10 x 100 ft (long single) costs $6,480-$8,790, about 284% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 20 ft (1 car, short)$1,640-$2,340
12 x 24 ft (1 car)$2,170-$3,050
20 x 20 ft (2 car, short)$2,850-$3,950
24 x 24 ft (2 car)Most common$3,910-$5,370
24 x 36 ft (3 car)$5,660-$7,690
10 x 100 ft (long single)$6,480-$8,790

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

The gap between options is wide: stained or saw-cut patterns costs about 2.0 times as much as plain gray concrete, broom finish in Tulsa, and resurfacing overlay (on sound old slab) trims about 33%.

TypeTypical jobInstalled
Gravel (for comparison)$1,510-$2,510$1.87-$3.09 installed
Resurfacing overlay (on sound old slab)$2,440-$3,790$3.50-$5.31 installed
Asphalt (for comparison)$2,920-$4,360$4.33-$6.30 installed
Plain gray concrete, broom finishMost common$3,910-$5,370$6.05-$8.06 installed
Swirl or trowel finish$4,120-$5,630$6.41-$8.51 installed
Rock salt finish$4,320-$5,940$6.75-$9.05 installed
Exposed aggregate$4,760-$6,520$7.52-$10.06 installed
Colored concrete$4,780-$6,600$7.56-$10.19 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$4,940-$6,850$7.84-$10.63 installed
Pervious (porous) concrete$5,640-$7,920$9.04-$12.47 installed
Stamped concrete$6,820-$9,330$11.10-$14.93 installed
Stained or saw-cut patterns$7,800-$10,750$12.79-$17.39 installed
Pavers (for comparison)$7,880-$11,110$12.94-$18.02 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Tulsa driveway cost?

We have already loaded Tulsa prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 7 items your quote includes. The costliest line in Tulsa is "Apron / curb cut" at $674-$1,110 for the job.

  • Remove old driveway$2.13-$3.01 / sq ft
  • Rebar grid (instead of mesh)$0.97-$2.19 / sq ft
  • Fiber reinforcement$0.42-$0.62 / sq ft
  • 6 in. slab instead of 4 in.$1.15-$1.54 / sq ft
  • Apron / curb cut$674-$1,110 / job
  • Heated driveway (hydronic or electric)$13.88-$22.88 / sq ft
  • Sealer$0.33-$0.46 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Tulsa different for this job

Tulsa homes and the local housing stock

What a driveway costs against a Tulsa home

In Tulsa, a city of mostly houses (65% of units), a driveway is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

Set against the $205,300 median home value, the typical new concrete driveway in Tulsa comes to roughly 2.3%. Only 36 of 147 markets come out higher, so it is a bigger decision relative to the house than in most cities.

When to plan this work in Tulsa

When to pour a driveway in Tulsa

For a new concrete driveway in Tulsa, the simplest pours happen outside November through February, when the average low at the Tulsa International Airport weather station is under 40°F. Below that mark, ACI's cold-weather practices apply: pouring in the warmest part of the day and covering the slab so it can't freeze while it cures.

Heat is the other extreme: average highs reach 90°F or more in July and August in Tulsa, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.

Driveway concrete for Tulsa's climate

NOAA's normals count about 72 freezing nights a year in Tulsa, compared with medians of 82 across Oklahoma weather stations and 124 across U.S. stations.

Where concrete freezes and thaws, the residential code calls for air-entrained concrete with a higher minimum strength, so ask for the mix in the quote.

A new curb cut or apron usually needs a permit from the city's public works or right-of-way office.

Driveways in Tulsa at a glance
Nights at or below 32°F72
Yearly snowfall (nearby station)8.7 in
Yearly precipitation41.0 in
Contractor license (Oklahoma)No state general contractor license
Where to check a licenseOklahoma Construction Industries Board

Local data checked October 2026 · Sources at the bottom of the page

Watershed and floodplain permits for site work in Tulsa

In Tulsa, unless exempt, a Watershed Development Permit is required before excavating, grading, paving or filling any property in the city, and any development or earth change in the city's regulatory floodplain also needs a floodplain permit. Routine grounds maintenance, landscaping and gardening that need no building permit or zoning relief and do not affect drainage into or out of a public right-of-way are exempt.

How the city applies this to a like-for-like driveway replacement was not confirmed; ask Tulsa Development Services.

Tulsa Revised Ordinances Title 11-A, Secs. 301 and 302 · Checked October 10, 2026

Nearby pricing

How Tulsa compares with nearby cities

Labor

Labor rates

For concrete driveway in Tulsa, contractors bill about $44-$58 per worker-hour for concrete finishers, whose median pay is $22.19 an hour. The difference covers insurance, taxes, overhead and profit.

Cement Masons and Concrete Finishers

$22.19/hrMedian pay
$44-$58/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Tulsa

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included
Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Tulsa, OK?

Concrete driveway cost in Tulsa, OK: $3,910-$5,370 (typical job: 576 sq ft). The table near the top of the page prices each option separately.

How does pay for cement masons in the Tulsa area compare with the national median?

Median pay for cement masons in the Tulsa, OK metro area is 19% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Tulsa get?

About 74 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Tulsa in?

Tulsa County is in climate zone 3A on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Tulsa prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

NumeralQ planning estimate. How we estimate

$3,910-$5,370NumeralQ planning estimate
Get my estimate