Insulation Cost in Oklahoma City, OK: 2026 Local Guide

Typical Oklahoma City job · 1,000 sq ft
$1,200-$2,010About the U.S. price

In Oklahoma City, insulating 1,000 sq ft usually costs $1,200-$2,010, close to the national typical job.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$850-$1,500
Most common
Blown-in fiberglass, attic (R-38)
$1,200-$2,010
Premium
Spray foam, closed-cell (2 in.)
$3,640-$5,170
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

The biggest driver is size: 500 sq ft costs $660-$1,100 in Oklahoma City, while 2,500 sq ft costs $2,820-$4,720, about 328% more. Ask every contractor to quote the same measured size.

SizeCost
500 sq ft$660-$1,100
1,000 sq ftMost common$1,200-$2,010
1,500 sq ft$1,740-$2,910
2,000 sq ft$2,280-$3,820
2,500 sq ft$2,820-$4,720

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

In Oklahoma City, radiant barrier (attic) comes in about 27% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,200-$2,010).

TypeTypical jobInstalled
Radiant barrier (attic)$850-$1,500$0.73-$1.31 installed
Blown-in fiberglass, attic (R-38)Most common$1,200-$2,010$1.08-$1.81 installed
Blown-in cellulose, attic (R-38)Most common$1,200-$2,010$1.08-$1.81 installed
Fiberglass batts, walls (R-13)$1,380-$1,780$1.26-$1.58 installed
Rigid foam board (R-5 per inch, 2 in.)$1,670-$4,100$1.55-$3.91 installed
Fiberglass batts, attic floor (R-30)$2,030-$2,370$1.91-$2.17 installed
Spray foam, open-cell (3.5 in.)$2,100-$3,130$1.98-$2.94 installed
Dense-pack cellulose, existing walls$2,390-$3,300$2.27-$3.10 installed
Mineral wool batts (R-15)$2,550-$3,550$2.43-$3.35 installed
Spray foam, closed-cell (2 in.)$3,640-$5,170$3.52-$4.97 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Oklahoma City insulation project cost?

We have already loaded Oklahoma City prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 2 extras are where quotes most often grow. The largest single line in Oklahoma City is "Air sealing (attic)" at $636-$964 for the job, so ask whether it is included.

  • Remove old insulation$1.23-$1.66 / sq ft
  • Air sealing (attic)$636-$964 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Oklahoma City different for this job

Oklahoma City homes and the local housing stock

Oklahoma City homes and insulation

Census figures put the median construction year at 1982 in Oklahoma City and 1976 for the median of NumeralQ's 147 markets, and house age shapes most insulation jobs here. By room count, the median Oklahoma City home is about average: 5.4 rooms against 5.2 for the median of NumeralQ's 147 markets, which sets the scope of most insulation jobs.

Most Oklahoma City homes were built in 1982 or later, under an energy code, so attics usually have some insulation already. The job is often a top-up rather than a full install.

Set against the $231,300 median home value, the typical insulation job in Oklahoma City comes to roughly 0.7%. Only 39 of 147 markets come out higher, so it is a bigger decision relative to the house than in most cities.

Local rules and records for Oklahoma City

Rebates from your utility

Program pages from the utility. Amounts change often, so check the program page.

How much insulation Oklahoma City homes need

For climate zone 3A (Oklahoma County), ENERGY STAR suggests R49 to R60 of attic insulation.

A typical year in Oklahoma City brings 3,615 heating degree days and 1,867 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.

For comparison, the median station in Oklahoma records 3,603 heating and 1,964 cooling degree days, and the U.S. median is 5,483 and 848.

Oklahoma builds new homes to the 2018 IRC energy chapter with Oklahoma changes. For an existing attic, ask the installer to write the installed depth and R-value on the invoice.

Insulation in Oklahoma City at a glance
Climate zone (county)3A
ENERGY STAR attic levelR49 to R60
Heating / cooling degree days3,615 / 1,867
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Oklahoma)No state general contractor license
Where to check a licenseOklahoma Construction Industries Board

Local data checked October 2026 · Sources at the bottom of the page

OG&E Attic Insulation Rebates

For OG&E customers, residential customers may apply for attic insulation rebates if work is performed by a professional and results in at least R-38 insulation value.

Program excludes multi-family homes, buildings under 10 years old, and specific utility-territory structures.

OG&E Attic Insulation Rules and Guidelines - Oklahoma · Program terms as of October 2026

Local planning note for Oklahoma City

OG&E's attic insulation rebate rules

OG&E's attic insulation rebate is open to its customers in a single-family home on a permanent foundation that is more than 10 years old. Existing insulation must be under 8 inches (R-23) and the finished attic at least 13 inches (R-38), installed by a professional company. Your application has to be in by December 1, and there's one rebate per address. Co-op-served parts of Oklahoma City aren't covered.

Nearby pricing

How Oklahoma City compares with nearby cities

Labor

Labor rates

For insulation in Oklahoma City, contractors bill about $45-$59 per worker-hour for insulation workers, whose median pay is $22.54 an hour. The difference covers insurance, taxes, overhead and profit.

Insulation Workers, Floor, Ceiling, and Wall

$22.54/hrMedian pay
$45-$59/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Oklahoma City

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Oklahoma City

How many insulation installers work in Oklahoma City's area

For insulating an attic or walls in Oklahoma City, the local pool is 50 drywall and insulation contractors in Oklahoma County (Census, 2023): 1.4 per 10,000 homes, about the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

A middle-of-the-pack field means Oklahoma City homeowners should be able to get two or three insulation job bids without long waits, outside the busiest season.

Common questions

Frequently Asked Questions

How much does Insulation cost in Oklahoma City, OK?

Insulation cost in Oklahoma City, OK: $1,200-$2,010 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Oklahoma City area compare with the national median?

Median pay for construction laborers in the Oklahoma City, OK metro area is 16% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Oklahoma City?

About 47% were built before 1980, according to the Census Bureau, against 49% across Oklahoma and 50% nationally.

How do most Oklahoma City homes heat?

About 57% heat mainly with piped gas and 40% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Oklahoma City prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • OG&E, checked 2026-10-26 (https://www.oge.com/web/portal/label_ord/energy-solutions/efficiency-programs/residential-energy-efficiency)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • OG&E Attic Insulation Rules and Guidelines - Oklahoma, checked October 11, 2026 (https://www.oge.com/documents/d/portal/ok-attic-insulation-guidelines-1)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

NumeralQ planning estimate. How we estimate

$1,200-$2,010NumeralQ planning estimate
Get my estimate