Insulation Cost in Dayton, OH: 2026 Local Guide

Typical Dayton job · 1,000 sq ft
$1,330-$2,1707% above U.S.

Plan on $1,330-$2,170 for insulating 1,000 sq ft in Dayton, 7% above the national typical job.

The median home in Dayton was built in 1951, and older attics and walls were often built with little or no insulation, so the gain from adding it is bigger.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$960-$1,640
Most common
Blown-in fiberglass, attic (R-38)
$1,330-$2,170
Premium
Spray foam, closed-cell (2 in.)
$3,960-$5,590
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

Size moves the price more than anything else. In Dayton, going from 500 sq ft to 2,500 sq ft takes the job from $730-$1,200 to $3,100-$5,090, so have the size measured before comparing quotes.

SizeCost
500 sq ft$730-$1,200
1,000 sq ftMost common$1,330-$2,170
1,500 sq ft$1,920-$3,140
2,000 sq ft$2,510-$4,110
2,500 sq ft$3,100-$5,090

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

Material choice is the second big lever in Dayton. Radiant barrier (attic) runs $960-$1,640, about 26% under blown-in fiberglass, attic (R-38), while spray foam, closed-cell (2 in.) costs $3,960-$5,590.

TypeTypical jobInstalled
Radiant barrier (attic)$960-$1,640$0.82-$1.42 installed
Blown-in fiberglass, attic (R-38)Most common$1,330-$2,170$1.18-$1.94 installed
Blown-in cellulose, attic (R-38)Most common$1,330-$2,170$1.18-$1.94 installed
Fiberglass batts, walls (R-13)$1,520-$1,950$1.37-$1.72 installed
Rigid foam board (R-5 per inch, 2 in.)$1,760-$4,220$1.62-$3.99 installed
Fiberglass batts, attic floor (R-30)$2,100-$2,460$1.96-$2.24 installed
Spray foam, open-cell (3.5 in.)$2,310-$3,410$2.17-$3.18 installed
Mineral wool batts (R-15)$2,630-$3,660$2.49-$3.43 installed
Dense-pack cellulose, existing walls$2,700-$3,710$2.56-$3.48 installed
Spray foam, closed-cell (2 in.)$3,960-$5,590$3.82-$5.36 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Dayton insulation project cost?

We have already loaded Dayton prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every insulation job needs these, but ask about each one before you sign. In Dayton, the biggest line is "Air sealing (attic)" at $764-$1,130 for the job.

  • Remove old insulation$1.51-$2.03 / sq ft
  • Air sealing (attic)$764-$1,130 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Dayton different for this job

Dayton homes and the local housing stock

Dayton homes and insulation

Room count drives the size of insulation jobs, and the median Dayton home has 5.4 (bathrooms excluded) compared with 5.1 for the other Ohio cities NumeralQ covers. Half of Dayton's homes were built in 1951 or earlier, in line with the other Ohio cities NumeralQ covers at 1952, which is the starting point for most insulation jobs.

With the median home from 1951, many Dayton attics were insulated to the standards of their day, well below today's levels. A depth check before the quote tells you how much needs adding.

The midpoint price of an insulation job works out to about 1.7% of what the median Dayton home is worth ($100,600), the 2nd highest of the 147 markets NumeralQ covers. Only 1 come out higher.

Local planning note for Dayton

Dayton next to Cincinnati and Columbus

Set against what homes are worth, insulating an attic or walls costs Dayton owners more than their neighbors: 1.7% of the median home value, compared with 0.8% in Cincinnati.

Comparing Dayton with its neighbors, BLS puts insulation workers' median pay 63% above the U.S. median in Columbus but 19% above the U.S. median in Cincinnati, a gap that tends to show up in insulation job quotes.

CityTypical job (midpoint)Share of median home valuePay for insulation workers vs U.S.
Dayton$1,7501.7%+19% (state figure)
Cincinnati$1,7500.8%+19%
Columbus$2,0150.8%+63%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Insulation targets for Dayton

For climate zone 5A (Montgomery County), ENERGY STAR suggests R60 of attic insulation.

A typical year in Dayton brings 5,149 heating degree days and 1,154 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.

The median Ohio weather station logs 5,690 and 848; the median U.S. station, 5,483 and 848.

New construction in Ohio follows the 2018 IECC with state changes; retrofit jobs are often not inspected, so get the installed R-value in writing.

Insulation in Dayton at a glance
Climate zone (county)5A
ENERGY STAR attic levelR60
Heating / cooling degree days5,149 / 1,154
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Ohio)No state residential contractor license; cities register contractors
Where to check a licenseCity building department

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Dayton compares with nearby cities

Labor

Labor rates

For insulation in Dayton, contractors bill about $56-$73 per worker-hour for insulation workers, whose median pay is $28.08 an hour. The difference covers insurance, taxes, overhead and profit.

Insulation Workers, Floor, Ceiling, and Wall

$28.08/hrMedian pay
$56-$73/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Dayton

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Dayton

How many insulation installers work in Dayton's area

For insulating an attic or walls in Dayton, the local pool is 10 drywall and insulation contractors in Montgomery County (Census, 2023): 0.4 per 10,000 homes, 71% below the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

Fewer insulation installers per home can mean longer waits in busy months, so book an insulation job in Dayton early and consider firms from neighboring counties.

Common questions

Frequently Asked Questions

How much does Insulation cost in Dayton, OH?

Insulation cost in Dayton, OH: $1,330-$2,170 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Dayton-Kettering-Beavercreek area compare with the national median?

Median pay for construction laborers in the Dayton-Kettering-Beavercreek, OH metro area is 12% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Dayton?

About 85% were built before 1980, according to the Census Bureau, against 63% across Ohio and 50% nationally.

How do most Dayton homes heat?

About 68% heat mainly with piped gas and 28% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Dayton prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • ENERGY STAR, recommended home insulation R-values by climate zone (https://www.energystar.gov/saveathome/seal_insulate/identify-problems-you-want-fix/diy-checks-inspections/insulation-r-values)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

We start from a national baseline and adjust it for Dayton (1.01×). How we estimate

$1,330-$2,170NumeralQ planning estimate
Get my estimate