Fence Installation Cost in Fargo, ND: 2026 Local Guide

Typical Fargo job · 150 linear ft
$3,020-$5,090About the U.S. price

Most Fargo homeowners pay $3,020-$5,090 for 150 linear ft of new fence, within a few percent of the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$790-$1,490
Most common
Wood privacy, 6 ft pressure-treated
$3,020-$5,090
Premium
Composite privacy, 6 ft
$6,390-$9,970
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Fargo the range runs from $660-$1,090 for 25 linear ft to $7,740-$13,110 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$660-$1,090
50 linear ft$1,140-$1,890
100 linear ft$2,080-$3,490
150 linear ftMost common$3,020-$5,090
200 linear ft$3,970-$6,700
300 linear ft$5,850-$9,900
400 linear ft$7,740-$13,110

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Fargo. Farm wire or electric runs $790-$1,490, about 72% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,390-$9,970.

TypeTypical jobInstalled
Farm wire or electric$790-$1,490$4.00-$8.04 installed
Split rail (2-3 rail)$1,520-$2,240$8.82-$13.04 installed
Chain link, 4 ft galvanized$2,470-$3,640$15.16-$22.36 installed
Wood privacy, 6 ft pressure-treatedMost common$3,020-$5,090$18.87-$32.05 installed
Wood picket, 4 ft$3,220-$4,570$20.17-$28.58 installed
Cedar privacy, 6 ft$3,710-$5,700$23.47-$36.09 installed
Vinyl privacy, 6 ft$3,890-$6,270$24.62-$39.92 installed
Steel ornamental, 4-5 ft$4,350-$6,630$27.69-$42.28 installed
Aluminum ornamental, 4-5 ft$4,560-$6,630$29.12-$42.32 installed
Composite privacy, 6 ft$6,390-$9,970$41.33-$64.59 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Fargo fence cost?

We have already loaded Fargo prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 4 items your quote includes. The costliest line in Fargo is "Drive gate (double)" at $1,350-$3,120 each.

  • Walk gate$333-$639 / each
  • Drive gate (double)$1,350-$3,120 / each
  • Remove old fence$4.03-$5.24 / linear ft
  • Sloped or rocky ground (extra per ft)$2.68-$4.46 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Fargo different for this job

Fargo homes and the local housing stock

Who builds fences in Fargo

Only 44% of units in Fargo are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.

Against the $281,900 median home value, a typical new fence in Fargo costs about 1.4% of the house. That ranks 54th of 147 markets, with 1st the most expensive relative to home values.

Fargo Fence Installation Pricing — 2026 Local Market

Fence installation cost in Fargo, ND: $3,020-$5,090 (typical job: 150 linear ft).

Fargo's climate and fence work

NOAA's climate normals count about 172 freezing nights a year in Fargo, compared with medians of 189 across North Dakota weather stations and 124 across U.S. stations.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Fargo at a glance
Nights at or below 32°F172
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (North Dakota)Secretary of State contractor license for jobs over $4,000
Where to check a licenseNorth Dakota Secretary of State

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Fargo

Fence rules in Fargo

RuleValue
Front yard3 ft anywhere in front of the home (4 ft if see-through like chain link)
Back and side yard6.5 ft
Permit neededNo permit unless over 6.5 ft
SetbackHistoric overlays: side fences end 2 ft behind the front facade

LDC 20-0403(B).

River setback limits in Fargo

For Fargo lots along the Red, Wild Rice or Sheyenne rivers, watercourse setbacks create a Minimal Disturbance Zone, the greater of 350 feet from the Red or Wild Rice centerline or the floodway (175 feet for the Sheyenne), plus a 100-foot Limited Disturbance Zone beyond it. In these zones, fill, grading, excavation, irrigation systems and most permanent structures are not allowed; one accessory building up to 120 square feet is allowed in the Limited Disturbance Zone.

Exemptions may apply to lots behind a permanent flood protection structure; confirm with the city.

Fargo Land Development Code Sec. 20-0508 (watercourse setbacks) · Checked October 10, 2026

Permits in Fargo

Fargo only requires a fence permit above 6½ feet. In front of the house, fences top out at 3 feet, or 4 feet if you can see through them, and the city suggests setting a fence about 2 feet inside the property line so you can maintain both sides.

Fence height limits in Fargo

In Fargo's SR, MR, UMU, NC and NO zoning districts, front-yard fences, walls and hedges may not exceed 3 feet, or 4 feet if at least 75 percent light-permeable. Elsewhere in side and rear yards the limit is 6.5 feet, and a rear-yard fence set at least 3 feet from the property line may reach 8.5 feet. Height is measured from the ground on the higher side.

Unlike other accessory structures, fences may be placed in public easements; confirm placement with the city.

Fargo Land Development Code Sec. 20-0403 (accessory uses) · Checked October 10, 2026

Nearby pricing

How Fargo compares with nearby cities

Labor

Labor rates

For fence installation in Fargo, contractors bill about $48-$62 per worker-hour for fence erectors, whose median pay is $23.75 an hour, 3% above the U.S. median. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$23.75/hrMedian pay
$48-$62/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Fargo

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Fargo, ND?

Fence installation cost in Fargo, ND: $3,020-$5,090 (typical job: 150 linear ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Fargo area compare with the national median?

Median pay for construction laborers in the Fargo, ND-MN metro area is 3% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Cass County?

NOAA logged 156 thunderstorm wind reports of 58 mph or more in Cass County from 2016 to 2025.

How much snow does Fargo get in a typical year?

About 51.4 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Fargo prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • City of Fargo Inspections FAQs, checked 2026-10-26 (https://fargond.gov/city-government/departments/inspections/faqs)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)

This estimate is NumeralQ's national baseline with a Fargo adjustment of 1.02×. How we estimate

$3,020-$5,090NumeralQ planning estimate
Get my estimate