Deck or patio cost by size
The biggest driver is size: 10 x 10 ft costs $1,700-$2,360 in Reno, while 20 x 30 ft costs $10,200-$14,170, about 500% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,700-$2,360 |
| 12 x 12 ft | $2,450-$3,400 |
| 12 x 16 ft | $3,260-$4,530 |
| 16 x 16 ft | $4,350-$6,050 |
| 16 x 20 ftMost common | $5,440-$7,560 |
| 20 x 20 ft | $6,800-$9,450 |
| 20 x 30 ft | $10,200-$14,170 |
Installed: Deck: pressure-treated wood
Deck or patio cost by material or type
In Reno, patio: plain concrete comes in about 53% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.3 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $5,440-$7,560).
| Type | Typical job | Installed |
|---|---|---|
| Patio: plain concrete | $2,610-$3,460 | $8.15-$10.82 installed |
| Patio: gravel | $3,000-$4,180 | $9.37-$13.06 installed |
| Patio: brick pavers | $4,400-$6,070 | $13.76-$18.97 installed |
| Patio: stamped concrete | $4,660-$6,200 | $14.55-$19.38 installed |
| Patio: flagstone | $4,860-$12,180 | $15.18-$38.06 installed |
| Patio: concrete pavers | $4,900-$6,760 | $15.32-$21.12 installed |
| Deck: pressure-treated woodMost common | $5,440-$7,560 | $17.00-$23.62 installed |
| Patio: slate | $5,950-$9,430 | $18.58-$29.47 installed |
Show 9 more options
| Type | Typical job | Installed |
|---|---|---|
| Patio: porcelain pavers | $6,110-$9,360 | $19.09-$29.25 installed |
| Patio: travertine pavers | $6,420-$8,580 | $20.05-$26.82 installed |
| Deck: cedar | $6,490-$9,490 | $20.28-$29.65 installed |
| Patio: bluestone | $6,830-$10,860 | $21.35-$33.95 installed |
| Deck: redwood | $8,870-$12,220 | $27.72-$38.19 installed |
| Deck: composite | $9,820-$14,330 | $30.70-$44.78 installed |
| Deck: aluminum | $10,060-$13,320 | $31.45-$41.63 installed |
| Deck: PVC | $10,670-$14,150 | $33.33-$44.22 installed |
| Deck: ipe hardwood | $12,480-$17,950 | $38.99-$56.09 installed |
Materials include waste and contractor markup. Typical job: 320 sq ft
What will your Reno deck or patio cost?
We have already loaded Reno prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 8 extras are where quotes most often grow. The largest single line in Reno is "Pergola or cover structure" at $4,520-$8,240 for the job, so ask whether it is included.
- Railing: wood$34.91-$47.80 / linear ft
- Railing: aluminum or steel$50.54-$86.84 / linear ft
- Railing: composite$94-$165 / linear ft
- Railing: cable$112-$186 / linear ft
- Railing: glass$134-$230 / linear ft
- Stairs (per step, wood, pre-cut stringers)$112-$192 / step
- Footing (poured concrete)$211-$372 / each
- Pergola or cover structure$4,520-$8,240 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Railing: wood | $12.07-$18.11 / linear ft |
| Railing: aluminum or steel | $30.19-$60.38 / linear ft |
| Railing: composite | $60-$121 / linear ft |
| Railing: cable | $85-$151 / linear ft |
| Railing: glass | $97-$181 / linear ft |
| Stairs (per step, wood, pre-cut stringers) | $33.81-$90.56 / step |
| Footing (poured concrete) | $57-$173 / each |
| Pergola or cover structure | $1,720-$4,600 / job |
Installed price per unit
What makes Reno different for this job
Reno homes and the local housing stock
Reno yards and who owns them
In Reno, a city of mostly houses (56% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.
Measured against the $548,300 median home value, a typical deck or patio in Reno is about 1.2% of the house, the 24th lowest share of the 147 markets on this site.
Local planning note for Reno
Reno, Las Vegas and Henderson side by side
Next to Las Vegas and Henderson, a deck or patio is the lightest lift in Reno relative to home value, at 1.2% of the median home.
Getting deck or patio bids from outside Reno? The Las Vegas and Henderson pages below show the full price ranges there.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. |
|---|---|---|---|
| Reno | $6,500 | 1.2% | +3% |
| Las Vegas | $6,500 | 1.5% | +3% |
| Henderson | $6,500 | 1.3% | +3% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Reno's ground and weather for decks
Reno averages 122 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 167 across Nevada weather stations and 124 across U.S. stations.
Ask the building department for Reno's frost depth. The model code requires deck footings to sit below it, and at least 12 inches down.
Under the model residential code, a deck needs a permit unless it is under 200 square feet, less than 30 inches above grade and not attached to the house. Many cities amend that, so check before you build.
The station also averages 7.3 inches of rain and melted snow a year (U.S. median: 37.5).
| Nights at or below 32°F | 122 |
|---|---|
| Yearly precipitation | 7.3 in |
| Climate zone (county) | 5B |
| Contractor license (Nevada) | State Contractors Board license unless under $1,000 and no permit |
| Where to check a license | Nevada State Contractors Board |
Local data checked October 2026 · Sources at the bottom of the page
Patio cover permits and snow loads in Reno
City rule
In Reno, patio covers are a permit type that requires plans. The city's prescriptive Patio Cover Design Guide for covers attached to a house is based on a 50 pounds per square foot ground snow load, 120 mph wind and seismic design category D2. Above 4,500 feet elevation, the 2024 Northern Nevada amendments Reno adopted set ground snow loads from an elevation table.
Sites at higher elevations may need an engineered design beyond the prescriptive guide; ask Reno Building.
City of Reno Patio Cover Design Guide; 2024 Northern Nevada Amendments Table 1608.2.1 · Checked October 10, 2026
Local risks for this work in Reno
Local risks that change the job in Reno
Reno sits in Washoe County, which carries a Relatively High rating for wildfire risk in FEMA's National Risk Index. Decks sit in NFPA's most important zone, the first 5 feet from the house. NFPA advises screening or boxing in the space under a deck with wire mesh and storing nothing underneath, and a patio makes a fuel break.
How Reno compares with nearby cities
Labor rates
For deck or patio in Reno, contractors bill about $60-$78 per worker-hour for carpenters, whose median pay is $29.98 an hour, 3% above the U.S. median. The difference covers insurance, taxes, overhead and profit.
Carpenters
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Reno
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Frequently Asked Questions
How much does Deck & Patio cost in Reno, NV?
Deck or patio cost in Reno, NV: $5,440-$7,560 (typical job: 320 sq ft). The table near the top of the page prices each option separately.
How does pay for carpenters in the Reno area compare with the national median?
Median pay for carpenters in the Reno, NV metro area is 3% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Washoe County?
NOAA logged 7 thunderstorm wind reports of 58 mph or more in Washoe County from 2016 to 2025.
How much snow does Reno get in a typical year?
About 20.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Reno prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- NFPA, Preparing homes for wildfire: the immediate, intermediate and extended zones, checked 2026-11-10 (https://www.nfpa.org/education-and-research/wildfire/preparing-homes-for-wildfire)
- NOAA climate normals source
- International Residential Code source
- DOE climate zone guide source
- Nevada State Contractors Board source
- NOAA Storm Events Database source
NumeralQ planning estimate. How we estimate