Furnace replacement cost by size
Size moves the price more than anything else. In Nebraska, going from 40,000 BTU to 120,000 BTU takes the job from $4,580-$7,440 to $5,450-$9,190, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,580-$7,440 |
| 60,000 BTU | $4,800-$7,870 |
| 80,000 BTUMost common | $5,020-$8,310 |
| 100,000 BTU | $5,230-$8,750 |
| 120,000 BTU | $5,450-$9,190 |
Furnace replacement cost by material or type
Material choice is the second big lever in Nebraska. Electric furnace runs $3,310-$5,760, about 32% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $6,930-$11,050.
What will your Nebraska furnace cost?
We have already loaded Nebraska prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
State conditions
Local planning note for Nebraska
How Nebraska's cities differ for this job
Omaha pays HVAC technicians the most of Nebraska's covered cities (3% above the U.S. median), and Lincoln the least (3% below the U.S. median), per BLS, which moves the labor share of furnace bids. Gas heat is most common in Omaha, where 72% of homes use it, and least common in Lincoln (64%), so an all-electric quote is a bigger switch in Omaha.
Against home values, a typical furnace job is about the same everywhere in Nebraska we cover, 2.5% to 2.8% of the median home.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Lincoln | -3% | Not published | 64% | 2.5% |
| Omaha | +3% | Not published | 72% | 2.8% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
On a furnace replacement job in Nebraska, HVAC technicians earn a median $28.77 an hour, 2% below the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $58-$75 per worker-hour.
Before you sign in Nebraska
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for Nebraska
How Nebraska lien law affects a furnace replacement
If a sub or supplier on your furnace replacement isn't paid, the law may let them file a lien on the house even when you paid your contractor. Nebraska treats an owner-occupied home with one to four units as protected: a sub's lien is limited to what you still owed the contractor when you got its notice (Neb. Rev. Stat. 52-136).
Payments you made in good faith before that notice are protected, so read any notice of right to assert a lien before the next draw. On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in Nebraska?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Nebraska?
Yes. Pay for HVAC technicians runs from 3% below the national median in Lincoln to 3% above in Omaha (BLS, May 2025).
How much does a high-efficiency furnace save in Nebraska?
Furnace replacement cost in Nebraska: $5,020-$8,310 (80,000 BTU furnace).
Who licenses furnace installers in Nebraska?
Nebraska's rule is local only. The Nebraska Department of Labor has a free license lookup.
Would a heat pump cost less to run than a gas furnace in Nebraska?
Furnace replacement cost in Nebraska: $5,020-$8,310 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded Nebraska prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Lincoln Electric System, checked 2026-10-26 (https://www.les.com/sustainability/sustainable-energy-program)
- OPPD, checked 2026-10-26 (https://www.oppd.com/residential/products-services/save-money-save-energy/hvac-smart-rebates/)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Levelset, Nebraska lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/nebraska-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE