Deck & Patio Cost in Billings, MT: 2026 Local Guide

Typical Billings job · 320 sq ft
$5,280-$7,340About the U.S. price

Most Billings homeowners pay $5,280-$7,340 for a 320 sq ft deck or patio, within a few percent of the U.S. figure.

For comparable written proposals, confirm dimensions and elevation, footing and attachment details, decking and guard scope, and grading or drainage work.

Your options

Budget
Patio: plain concrete
$2,640-$3,510
Most common
Deck: pressure-treated wood
$5,280-$7,340
Premium
Deck: ipe hardwood
$12,150-$17,530
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

The biggest driver is size: 10 x 10 ft costs $1,650-$2,300 in Billings, while 20 x 30 ft costs $9,890-$13,770, about 499% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 10 ft$1,650-$2,300
12 x 12 ft$2,370-$3,300
12 x 16 ft$3,170-$4,410
16 x 16 ft$4,220-$5,880
16 x 20 ftMost common$5,280-$7,340
20 x 20 ft$6,590-$9,180
20 x 30 ft$9,890-$13,770

Installed: Deck: pressure-treated wood

Cost by material

Deck or patio cost by material or type

In Billings, patio: plain concrete comes in about 51% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.4 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $5,280-$7,340).

TypeTypical jobInstalled
Patio: plain concrete$2,640-$3,510$8.26-$10.96 installed
Patio: gravel$2,950-$4,120$9.23-$12.88 installed
Patio: brick pavers$4,450-$6,130$13.91-$19.15 installed
Patio: stamped concrete$4,720-$6,290$14.76-$19.67 installed
Patio: flagstone$4,880-$12,210$15.25-$38.15 installed
Patio: concrete pavers$4,970-$6,840$15.52-$21.38 installed
Deck: pressure-treated woodMost common$5,280-$7,340$16.49-$22.95 installed
Patio: slate$6,020-$9,530$18.82-$29.77 installed
Show 9 more options
TypeTypical jobInstalled
Patio: porcelain pavers$6,200-$9,470$19.36-$29.60 installed
Deck: cedar$6,310-$9,260$19.73-$28.93 installed
Patio: travertine pavers$6,480-$8,670$20.26-$27.09 installed
Patio: bluestone$6,920-$10,970$21.61-$34.29 installed
Deck: redwood$8,630-$11,910$26.97-$37.21 installed
Deck: composite$9,520-$13,930$29.74-$43.54 installed
Deck: aluminum$9,910-$13,120$30.95-$40.99 installed
Deck: PVC$10,330-$13,710$32.27-$42.83 installed
Deck: ipe hardwood$12,150-$17,530$37.98-$54.78 installed

Materials include waste and contractor markup. Typical job: 320 sq ft

What will your Billings deck or patio cost?

We have already loaded Billings prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 8 extras are where quotes most often grow. The largest single line in Billings is "Pergola or cover structure" at $4,370-$8,040 for the job, so ask whether it is included.

  • Railing: wood$33.66-$46.18 / linear ft
  • Railing: aluminum or steel$49.43-$85.39 / linear ft
  • Railing: composite$93-$163 / linear ft
  • Railing: cable$110-$184 / linear ft
  • Railing: glass$132-$228 / linear ft
  • Stairs (per step, wood, pre-cut stringers)$107-$186 / step
  • Footing (poured concrete)$203-$361 / each
  • Pergola or cover structure$4,370-$8,040 / job
Show material-only prices
Add-onMaterials
Railing: wood$12.07-$18.11 / linear ft
Railing: aluminum or steel$30.19-$60.38 / linear ft
Railing: composite$60-$121 / linear ft
Railing: cable$85-$151 / linear ft
Railing: glass$97-$181 / linear ft
Stairs (per step, wood, pre-cut stringers)$33.81-$90.56 / step
Footing (poured concrete)$57-$173 / each
Pergola or cover structure$1,720-$4,600 / job

Installed price per unit

Local conditions

What makes Billings different for this job

Billings homes and the local housing stock

Billings homes and outdoor projects

69% of Billings units are houses with their own lots, and 65% of homes are owner-occupied, so a deck is usually the owner's call, subject to HOA rules where they apply.

Against the $343,400 median home value, a typical deck or patio in Billings costs about 1.8% of the house. That ranks 74th of 147 markets, with 1st the most expensive relative to home values.

Building a deck in Billings

NOAA's climate normals count about 142 freezing nights a year in Billings, compared with medians of 186 across Montana weather stations and 124 across U.S. stations.

The residential code puts deck footings at least 12 inches into undisturbed soil and below the local frost line; the building department sets that depth for Billings.

The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.

Yearly precipitation runs about 14.3 inches here, against 37.5 at the median U.S. station.

Decks in Billings at a glance
Nights at or below 32°F142
Yearly precipitation14.3 in
Climate zone (county)6B
Contractor license (Montana)Construction contractor registration (no exam)
Where to check a licenseMontana Department of Labor & Industry

Local data checked October 2026 · Sources at the bottom of the page

Local planning note for Billings

Billings historic properties need a certificate first

In Billings (Article 6-700), an exterior change to a property in a historic district or on the local register needs a certificate of appropriateness before the city will issue a permit. The Yellowstone Historic Preservation Board reviews it. The code counts covering original materials and replacing a window as alterations. A new deck on a listed house is a visible exterior change, so expect it to go to the Board.

Permits in Billings

Decks in Billings need a building permit. A detached shed of 200 square feet or less is exempt.

Billings local historic designation

In Billings, National Register listing alone is not described as automatic local designation. Eligible residential buildings or districts may petition for the local register; a district petition requires at least two-thirds owner approval. Confirm local-register status for the property before planning exterior work.

Billings Code §6-705; local designation, not National Register status alone, controls this review.

Article 6-700 Historic Preservation · Checked October 10, 2026

Nearby pricing

How Billings compares with nearby cities

Labor

Labor rates

For deck or patio in Billings, contractors bill about $57-$74 per worker-hour for carpenters, whose median pay is $28.34 an hour, 3% below the U.S. median. The difference covers insurance, taxes, overhead and profit.

Carpenters

$28.34/hrMedian pay
$57-$74/hrBilled rate

Cement Masons and Concrete Finishers

$30.12/hrMedian pay
$60-$78/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Billings

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration
Common questions

Frequently Asked Questions

How much does Deck & Patio cost in Billings, MT?

Deck or patio cost in Billings, MT: $5,280-$7,340 (typical job: 320 sq ft). The table above breaks it out by option.

How does pay for carpenters in the Billings area compare with the national median?

Median pay for carpenters in the Billings, MT metro area is 3% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Yellowstone County?

NOAA logged 121 thunderstorm wind reports of 58 mph or more in Yellowstone County from 2016 to 2025.

How much snow does Billings get in a typical year?

About 57.4 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Billings prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • Article 6-700 Historic Preservation, checked October 10, 2026 (https://library.municode.com/mt/billings/codes/code_of_ordinances?nodeId=CICO_CH6BUBURE_ART6-700HIPR)

We start from a national baseline and adjust it for Billings (1.00×). How we estimate

$5,280-$7,340NumeralQ planning estimate
Get my estimate