Furnace Replacement Cost in Grand Rapids, MI: 2026 Local Guide

Typical Grand Rapids job · 80,000 BTU furnace
$5,030-$8,330About the U.S. price

In Grand Rapids, an 80,000 BTU furnace usually costs $5,030-$8,330, within a few percent of the U.S. figure.

For comparable written proposals, confirm fuel type and equipment capacity, venting and combustion-air scope, duct connections, and startup commissioning.

Your options

Budget
Electric furnace
$3,330-$5,780
Most common
Gas furnace, 95-96% AFUE
$5,030-$8,330
Premium
Gas boiler, hot water (high efficiency)
$8,010-$12,450
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Furnace replacement cost by size

The biggest driver is size: 40,000 BTU costs $4,600-$7,460 in Grand Rapids, while 120,000 BTU costs $5,470-$9,200, about 22% more. Ask every contractor to quote the same measured size.

SizeCost
40,000 BTU$4,600-$7,460
60,000 BTU$4,810-$7,890
80,000 BTUMost common$5,030-$8,330
100,000 BTU$5,250-$8,770
120,000 BTU$5,470-$9,200

Installed: Gas furnace, 95-96% AFUE

Cost by material

Furnace replacement cost by material or type

The gap between options is wide: gas boiler, hot water (high efficiency) costs about 1.5 times as much as gas furnace, 95-96% AFUE in Grand Rapids, and electric furnace trims about 32%.

TypeTypical job
Electric furnace$3,330-$5,780
Gas furnace, 80% AFUE (single stage)$4,330-$6,810
Gas furnace, 95-96% AFUEMost common$5,030-$8,330
Propane furnace (95%)$5,440-$8,860
Oil furnace$6,450-$10,290
Gas furnace, 96%+ 2-stage or modulating$6,780-$10,280
Gas boiler, hot water (high efficiency)$8,010-$12,450

Materials include waste and contractor markup. 80,000 BTU furnace

What will your Grand Rapids furnace cost?

We have already loaded Grand Rapids prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 5 extras are where quotes most often grow. The largest single line in Grand Rapids is "Ductwork repairs" at $2,460-$3,470 for the job, so ask whether it is included.

  • New PVC venting (when going 80% to 95%)$404-$1,060 / job
  • Gas line work$347-$1,010 / job
  • Ductwork repairs$2,460-$3,470 / job
  • Variable-speed blower upgrade$460-$1,110 / job
  • Smart thermostat$268-$499 / each
Show material-only prices
Add-onMaterials
New PVC venting (when going 80% to 95%)$173-$460 / job
Gas line work$115-$402 / job
Ductwork repairs$230-$575 / job
Variable-speed blower upgrade$460-$1,040 / job
Smart thermostat$132-$322 / each

Installed price per unit

Local conditions

What makes Grand Rapids different for this job

Grand Rapids homes and the local housing stock

Grand Rapids homes and their furnaces

For furnace swaps in Grand Rapids, start with the age of the house. The median home here dates to 1953; for the typical U.S. market on this site it is 1976. Who signs the contract matters for furnace swaps: in Grand Rapids, 62% of units are single-family houses and 54% of homes are lived in by their owners.

The midpoint price of a furnace replacement works out to about 2.7% of what the median Grand Rapids home is worth ($244,500), the 43rd highest of the 147 markets NumeralQ covers. Only 42 come out higher.

Owners live in 54% of Grand Rapids's homes. When you get bids for a furnace replacement, ask each contractor to size the equipment with a Manual J load calculation, as the residential code requires, rather than matching the old unit.

Furnace facts for Grand Rapids

NOAA's normals give Grand Rapids 6,408 heating degree days a year (compared with medians of 7,376 across Michigan weather stations and 5,483 across U.S. stations), a measure of how far below 65°F the days run.

About 82% of homes in Grand Rapids heat with piped gas, according to the Census Bureau (Michigan: 75%; U.S.: 46%).

Homes in Michigan paid an average $10.92 per thousand cubic feet of gas in 2025, below the U.S. average of $15.34, according to EIA. That's a statewide figure; your utility's rate may differ.

The federal floor for a new gas furnace is 80% AFUE. A 90%-plus condensing furnace needs plastic venting and a drain, so ask whether the quote includes that work.

Heating in Grand Rapids at a glance
Heating degree days6,408
Nights at or below 32°F133
Gas price, Michigan 2025$10.92 per Mcf (U.S. $15.34)
Federal furnace minimum80% AFUE (non-weatherized gas)
HVAC license (Michigan)State mechanical contractor license
Where to check a licenseMichigan LARA

Local data checked October 2026 · Sources at the bottom of the page

Grand Rapids permit fees for this job

Permit fees: what Grand Rapids charges

Grand Rapids treats a furnace replacement as mechanical work, so the permit is the city's HVAC fee, about $42 for a $12,000 replacement under the City of Grand Rapids Planning, Design and Development Fee Schedule FY2027, effective July 1, 2026.

For a furnace replacement, that fee is roughly 0.4% of what the typical job costs in Grand Rapids. Among 35 cities with a published, priceable HVAC replacement fee, Grand Rapids's is the 2nd lowest.

When to plan this work in Grand Rapids

The mild months for a furnace replacement in Grand Rapids

In Grand Rapids, heating and cooling run least in June and September, the two mildest months at the Grand Rapids weather station by NOAA degree days. That's the easiest time to be without the system on the day of the work, and the time to plan a furnace replacement, rather than after a breakdown in January.

January is the heaviest heating month in Grand Rapids, with about 1,246 heating degree days at the Grand Rapids weather station, so an old furnace is most likely to fail then.

Nearby pricing

How Grand Rapids compares with nearby cities

Labor

Labor rates

For furnace replacement in Grand Rapids, contractors bill about $58-$75 per worker-hour for HVAC technicians, whose median pay is $28.94 an hour, 1% below the U.S. median. The difference covers insurance, taxes, overhead and profit.

HVAC technicians

$28.94/hrMedian pay
$58-$75/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Grand Rapids

Get every quote to include

  • fuel type, equipment model, capacity, and documented sizing basis
  • venting, combustion air, gas or electrical connections, and ductwork
  • removal, startup, commissioning, and safety checks included
  • who checks and documents any required permits or inspections

Contractors per home in Grand Rapids

Contractor competition in Grand Rapids

If you need a furnace replacement, Kent County (home to Grand Rapids) had 203 plumbing, heating and air conditioning contractors in 2023, according to the Census Bureau. That's 7.5 for every 10,000 homes, about the U.S. rate of 7.7, and the 55th highest of the 135 counties NumeralQ prices. That count includes plumbers, since the Census groups them with HVAC firms.

Competition for a furnace replacement in Grand Rapids is close to typical, which keeps quotes in a fairly predictable band.

Permits in Grand Rapids

A new furnace, boiler or water heater in Grand Rapids needs a mechanical permit from the Development Center. Homeowners can pull it and do their own work, but landlords must use a licensed, registered mechanical contractor.

Grand Rapids Consumers Energy Rebates

For Consumers Energy customers, furnace rebates require installation by a Consumers Energy Trade Ally, who must also submit the application. 2026 insulation rebates require total R-6 or greater with specified minimum coverage, and window rebates require a U-factor of 0.27 or lower or ENERGY STAR Northern zone certification, documented by a contractor invoice. Incentives are valid through Dec 31, 2026.

Incentives are provided on a first-come, first-served basis.

Heating and Cooling Rebates; Windows and Insulation Rebates (Consumers Energy) · Program terms as of October 2026

Common questions

Frequently Asked Questions

How much does Furnace Replacement cost in Grand Rapids, MI?

Furnace replacement cost in Grand Rapids, MI: $5,030-$8,330 (80,000 BTU furnace). The table above breaks it out by option.

How does pay for HVAC technicians in the Grand Rapids-Wyoming-Kentwood area compare with the national median?

Median pay for HVAC technicians in the Grand Rapids-Wyoming-Kentwood, MI metro area is 1% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

What climate zone is Grand Rapids in?

Kent County is in climate zone 5A on the DOE's county list, which energy codes use to set insulation and window levels.

Are federal home energy rebates available in Michigan?

Michigan's federal home electrification rebate programed in October 2024, according to NASEO's September 2026 status list. Funding can run out, so check before counting on it.

Ready for your own number?

We have already loaded Grand Rapids prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • This Old House cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • https://www.grandrapidsmi.gov/media/4lzl0erl/planning-design-and-development-fee-schedule-fy2027.pdf
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • International Code Council, 2021 International Residential Code, Chapter 14: M1401.3 (equipment sized by ACCA Manual S from Manual J loads) (https://codes.iccsafe.org/content/IRC2021P2/chapter-14-heating-and-cooling-equipment-and-appliances)
  • City of Grand Rapids Planning, Design and Development Fee Schedule FY2027, effective July 1, 2026. https://www.grandrapidsmi.gov/media/4lzl0erl/planning-design-and-development-fee-schedule-fy2027.pdf (retrieved 2026-10-26)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)

This estimate is NumeralQ's national baseline with a Grand Rapids adjustment of 1.04×. How we estimate

$5,030-$8,330NumeralQ planning estimate
Get my estimate