Insulation Cost in Rockville, MD: 2026 Local Guide

Typical Rockville job · 1,000 sq ft
$1,190-$1,9903% below U.S.

Plan on $1,190-$1,990 for insulating 1,000 sq ft in Rockville, 3% under the U.S. figure.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$840-$1,490
Most common
Blown-in fiberglass, attic (R-38)
$1,190-$1,990
Premium
Spray foam, closed-cell (2 in.)
$3,610-$5,130
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

Find your size in the table. In Rockville the range runs from $650-$1,090 for 500 sq ft to $2,800-$4,690 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.

SizeCost
500 sq ft$650-$1,090
1,000 sq ftMost common$1,190-$1,990
1,500 sq ft$1,730-$2,890
2,000 sq ft$2,260-$3,790
2,500 sq ft$2,800-$4,690

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

In Rockville, radiant barrier (attic) comes in about 27% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,190-$1,990).

TypeTypical jobInstalled
Radiant barrier (attic)$840-$1,490$0.72-$1.30 installed
Blown-in fiberglass, attic (R-38)Most common$1,190-$1,990$1.07-$1.80 installed
Blown-in cellulose, attic (R-38)Most common$1,190-$1,990$1.07-$1.80 installed
Fiberglass batts, walls (R-13)$1,370-$1,760$1.25-$1.57 installed
Rigid foam board (R-5 per inch, 2 in.)$1,670-$4,090$1.55-$3.90 installed
Fiberglass batts, attic floor (R-30)$2,020-$2,360$1.90-$2.17 installed
Spray foam, open-cell (3.5 in.)$2,080-$3,110$1.96-$2.91 installed
Dense-pack cellulose, existing walls$2,360-$3,270$2.24-$3.07 installed
Mineral wool batts (R-15)$2,540-$3,540$2.42-$3.34 installed
Spray foam, closed-cell (2 in.)$3,610-$5,130$3.49-$4.94 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Rockville insulation project cost?

We have already loaded Rockville prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every insulation job needs these, but ask about each one before you sign. In Rockville, the biggest line is "Air sealing (attic)" at $625-$950 for the job.

  • Remove old insulation$1.20-$1.63 / sq ft
  • Air sealing (attic)$625-$950 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Rockville different for this job

Rockville homes and the local housing stock

Insulation and the age of Rockville's housing

For insulation jobs in Rockville, start with the age of the house. The median home here dates to 1979; for the median of NumeralQ's 147 markets it is 1976. By room count, the median Rockville home is about average: 5.3 rooms against 5.2 for the median of NumeralQ's 147 markets, which sets the scope of most insulation jobs.

With the median home from 1979, many Rockville attics were insulated to the standards of their day, well below today's levels. A depth check before the quote tells you how much needs adding.

High home values make the insulation job a small slice in Rockville: about 0.2% of the $682,300 median home, the 13th lowest among the 147 markets we price.

Rockville Insulation Pricing — 2026 Local Market

Insulation cost in Rockville, MD: $1,190-$1,990 (typical job: 1,000 sq ft).

How much insulation Rockville homes need

ENERGY STAR's attic recommendation for climate zone 4A, which covers Montgomery County, is R60.

NOAA's climate normals for a station near Rockville show 4,455 heating and 1,279 cooling degree days a year. Each degree day is one degree of daily average temperature below (heating) or above (cooling) 65°F.

For comparison, the median station in Maryland records 4,484 heating and 1,284 cooling degree days, and the U.S. median is 5,483 and 848.

Maryland builds new homes to the 2021 IECC with state changes. For an existing attic, ask the installer to write the installed depth and R-value on the invoice.

Insulation in Rockville at a glance
Climate zone (county)4A
ENERGY STAR attic levelR60
Heating / cooling degree days4,455 / 1,279
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Maryland)Maryland Home Improvement Commission license
Where to check a licenseMaryland Department of Labor

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Rockville compares with nearby cities

Labor

Labor rates

On an insulation job in Rockville, insulation workers earn a median $22.07 an hour. After insurance, payroll taxes and overhead, contractors bill about $44-$57 per worker-hour.

Insulation Workers, Floor, Ceiling, and Wall

$22.07/hrMedian pay
$44-$57/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Rockville

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Rockville

Insulation installers per home in Montgomery County

Census business counts for 2023 show 55 drywall and insulation contractors based in Montgomery County, the pool most Rockville homeowners draw on for an insulation job. That's 1.4 per 10,000 homes, about the U.S. rate of 1.4, the 61st lowest among the 135 counties on this site. The Census counts drywall and insulation firms together, so not every one of them does insulation.

That's a normal level of competition for Rockville, so an insulation job quote far above the others is worth questioning.

Common questions

Frequently Asked Questions

How much does Insulation cost in Rockville, MD?

Insulation cost in Rockville, MD: $1,190-$1,990 (typical job: 1,000 sq ft). The table above breaks it out by option.

How does pay for construction laborers in the Washington-Arlington-Alexandria area compare with the national median?

Median pay for construction laborers in the Washington-Arlington-Alexandria, DC-VA-MD-WV metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Rockville?

About 51% were built before 1980, according to the Census Bureau, against 51% across Maryland and 50% nationally.

How do most Rockville homes heat?

About 60% heat mainly with piped gas and 37% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Rockville prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • ENERGY STAR, recommended home insulation R-values by climate zone (https://www.energystar.gov/saveathome/seal_insulate/identify-problems-you-want-fix/diy-checks-inspections/insulation-r-values)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

This estimate is NumeralQ's national baseline with a Rockville adjustment of 1.13×. How we estimate

$1,190-$1,990NumeralQ planning estimate
Get my estimate