Concrete Driveway Cost in Rockville, MD: 2026 Local Guide

Typical Rockville job · 576 sq ft
$4,510-$6,150About the U.S. price

Most Rockville homeowners pay $4,510-$6,150 for a 576 sq ft concrete driveway, in line with what the same job costs nationally.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$2,860-$4,330
Most common
Plain gray concrete, broom finish
$4,510-$6,150
Premium
Stained or saw-cut patterns
$9,220-$12,590
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

Find your size in the table. In Rockville the range runs from $1,880-$2,650 for 10 x 20 ft (1 car, short) to $7,490-$10,090 for 10 x 100 ft (long single); a quote that does not state the measured size is hard to compare.

SizeCost
10 x 20 ft (1 car, short)$1,880-$2,650
12 x 24 ft (1 car)$2,490-$3,470
20 x 20 ft (2 car, short)$3,280-$4,510
24 x 24 ft (2 car)Most common$4,510-$6,150
24 x 36 ft (3 car)$6,530-$8,830
10 x 100 ft (long single)$7,490-$10,090

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

Material choice is the second big lever in Rockville. Resurfacing overlay (on sound old slab) runs $2,860-$4,330, about 33% under plain gray concrete, broom finish, while stained or saw-cut patterns costs $9,220-$12,590.

TypeTypical jobInstalled
Gravel (for comparison)$1,660-$2,710$2.05-$3.32 installed
Resurfacing overlay (on sound old slab)$2,860-$4,330$4.14-$6.14 installed
Asphalt (for comparison)$3,360-$4,920$5.00-$7.17 installed
Plain gray concrete, broom finishMost common$4,510-$6,150$7.01-$9.30 installed
Swirl or trowel finish$4,770-$6,480$7.46-$9.88 installed
Rock salt finish$5,000-$6,830$7.86-$10.49 installed
Exposed aggregate$5,510-$7,500$8.74-$11.64 installed
Colored concrete$5,520-$7,560$8.75-$11.74 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$5,760-$7,910$9.17-$12.36 installed
Pervious (porous) concrete$6,470-$9,000$10.41-$14.25 installed
Stamped concrete$8,040-$10,910$13.13-$17.57 installed
Pavers (for comparison)$9,030-$12,600$14.85-$20.51 installed
Stained or saw-cut patterns$9,220-$12,590$15.18-$20.49 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Rockville driveway cost?

We have already loaded Rockville prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every concrete driveway job needs these, but ask about each one before you sign. In Rockville, the biggest line is "Apron / curb cut" at $807-$1,280 for the job.

  • Remove old driveway$2.61-$3.63 / sq ft
  • Rebar grid (instead of mesh)$1.08-$2.35 / sq ft
  • Fiber reinforcement$0.50-$0.72 / sq ft
  • 6 in. slab instead of 4 in.$1.21-$1.62 / sq ft
  • Apron / curb cut$807-$1,280 / job
  • Heated driveway (hydronic or electric)$15.41-$24.87 / sq ft
  • Sealer$0.38-$0.53 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Rockville different for this job

Rockville homes and the local housing stock

What a driveway costs against a Rockville home

54% of Rockville units are houses with their own lots, and 53% of homes are owner-occupied, so a driveway is usually the owner's call, subject to HOA rules where they apply.

High home values make the new concrete driveway a small slice in Rockville: about 0.8% of the $682,300 median home, the 13th lowest among the 147 markets we price.

When to plan this work in Rockville

Best months for a driveway in Rockville

ACI treats concrete work as cold-weather work when the air is expected to fall below 40°F while the slab is curing, and below that concrete gains strength slowly. In Rockville, average lows are under 40°F in November through March at the Rockville 1 Northeast weather station, so a pour then needs insulating blankets, a cold-weather mix or accelerators, which can add to the bill.

Rockville Concrete Driveway Pricing — 2026 Local Market

Concrete driveway cost in Rockville, MD: $4,510-$6,150 (typical job: 576 sq ft).

Freeze-thaw and concrete in Rockville

Rockville averages 86 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 93 across Maryland weather stations and 124 across U.S. stations.

Where concrete freezes and thaws, the residential code calls for air-entrained concrete with a higher minimum strength, so ask for the mix in the quote.

A new curb cut or apron usually needs a permit from the city's public works or right-of-way office.

Driveways in Rockville at a glance
Nights at or below 32°F86
Yearly snowfall (nearby station)5.8 in
Yearly precipitation41.3 in
Contractor license (Maryland)Maryland Home Improvement Commission license
Where to check a licenseMaryland Department of Labor

Local data checked October 2026 · Sources at the bottom of the page

Stormwater rules for driveways and patios in Rockville

In Rockville, the city's stormwater management rules apply to work that creates or replaces 2,000 square feet or more of impervious area on a single-family detached, townhouse or semi-detached lot, or that disturbs 5,000 square feet or more. New paving built over existing paving counts as new impervious area, so replacing an old driveway or patio counts toward the total.

Exclusions from the measurement are narrow: solar panels on existing paved areas, bridges, and added floors or roofs that do not enlarge the footprint.

Rockville City Code Secs. 19-40, 19-41 and 19-45 (stormwater management) · Checked October 10, 2026

Floodplain permits in Rockville

For properties wholly or partly in, or in contact with, a mapped Special Flood Hazard Area in Rockville, development, including substantial improvement, needs a city floodplain permit and a floodplain variance. Patios, decks, paths and paving under 1,000 square feet that do not raise the surrounding grade by more than 1 foot need only the floodplain permit. Lowest floors must be at or above the base flood elevation plus 2 feet.

Applies only inside or touching the mapped Special Flood Hazard Area.

Rockville City Code Chapter 10 (floodplain management) · Checked October 10, 2026

Landscaping, paving and fences in Rockville historic districts

Within a Rockville local historic district, tree removal, fence work and driveway installation or changes go to the Historic District Commission. As of August 1, 2026, city staff may approve minor work such as plantings, walkways and small patios, replacing an existing driveway with different materials, fences in the same style, and removing trees under 12 inches in diameter; other work needs a Certificate of Approval from the commission.

Applies only to locally designated historic properties, and the staff-approval list can change; city forestry permits are separate.

City of Rockville: Make Alterations to a Historic Property · Checked October 10, 2026

Nearby pricing

How Rockville compares with nearby cities

Labor

Labor rates

On a concrete driveway job in Rockville, concrete finishers earn a median $28.05 an hour, 2% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $56-$73 per worker-hour.

Cement Masons and Concrete Finishers

$28.05/hrMedian pay
$56-$73/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Rockville

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included
Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Rockville, MD?

Concrete driveway cost in Rockville, MD: $4,510-$6,150 (typical job: 576 sq ft). The table above breaks it out by option.

How does pay for cement masons in the Washington-Arlington-Alexandria area compare with the national median?

Median pay for cement masons in the Washington-Arlington-Alexandria, DC-VA-MD-WV metro area is 2% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Rockville get?

About 23 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Rockville in?

Montgomery County is in climate zone 4A on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Rockville prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

NumeralQ planning estimate. How we estimate

$4,510-$6,150NumeralQ planning estimate
Get my estimate