Fence installation cost by size
Find your size in the table. In Baltimore the range runs from $660-$1,080 for 25 linear ft to $7,690-$13,030 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $660-$1,080 |
| 50 linear ft | $1,130-$1,870 |
| 100 linear ft | $2,060-$3,470 |
| 150 linear ftMost common | $3,000-$5,060 |
| 200 linear ft | $3,940-$6,660 |
| 300 linear ft | $5,810-$9,840 |
| 400 linear ft | $7,690-$13,030 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
Material choice is the second big lever in Baltimore. Farm wire or electric runs $770-$1,470, about 72% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,370-$9,940.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $770-$1,470 | $3.90-$7.91 installed |
| Split rail (2-3 rail) | $1,490-$2,210 | $8.71-$12.89 installed |
| Chain link, 4 ft galvanized | $2,430-$3,590 | $14.93-$22.07 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,000-$5,060 | $18.74-$31.88 installed |
| Wood picket, 4 ft | $3,160-$4,500 | $19.84-$28.16 installed |
| Cedar privacy, 6 ft | $3,690-$5,670 | $23.33-$35.91 installed |
| Vinyl privacy, 6 ft | $3,860-$6,240 | $24.49-$39.74 installed |
| Steel ornamental, 4-5 ft | $4,310-$6,570 | $27.45-$41.96 installed |
| Aluminum ornamental, 4-5 ft | $4,540-$6,610 | $29.01-$42.18 installed |
| Composite privacy, 6 ft | $6,370-$9,940 | $41.18-$64.40 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Baltimore fence cost?
We have already loaded Baltimore prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 4 items your quote includes. The costliest line in Baltimore is "Drive gate (double)" at $1,330-$3,090 each.
- Walk gate$327-$630 / each
- Drive gate (double)$1,330-$3,090 / each
- Remove old fence$3.91-$5.09 / linear ft
- Sloped or rocky ground (extra per ft)$2.62-$4.38 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Baltimore different for this job
Baltimore homes and the local housing stock
Who builds fences in Baltimore
In Baltimore, a city of mostly houses (65% of units), a fence is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.
Set against the $229,600 median home value, the typical new fence in Baltimore comes to roughly 1.8%. Only 31 of 147 markets come out higher, so it is a bigger decision relative to the house than in most cities.
Fence height limits in Baltimore
City rule
In Baltimore, the building code limits fences to 42 inches, measured on the high side, except that fences enclosing homes may be up to 6 feet tall in side or rear yards. A fence may be built only on the owner's property; neighbors building on a shared line must both submit a written agreement with the permit application. Razor wire is banned.
Fences do not appear on the city's list of work exempt from permits for one- and two-family homes; ask the city whether your fence needs a permit.
Building, Fire, and Related Codes of Baltimore City, Sec. 3118 (fences) · Checked October 8, 2026
Exterior work in Baltimore historic districts
District/overlay only
Within a Baltimore City historic district, or on a local Landmark, exterior work needs review by the Commission for Historical and Architectural Preservation (CHAP), and the building permit issues only after CHAP authorizes the work. Staff can approve minor work that clearly meets the design guidelines, such as roofing, matching window replacements, appropriate siding and front or rear fences. Some minor work that would not otherwise need a permit needs one in a CHAP district.
Applies only inside a CHAP historic district or to a local Landmark; whether CHAP formally reviews paint color was not confirmed.
Baltimore CHAP Rules and Regulations (Sec. 3.3) and Historic Preservation Design Guidelines (July 6, 2022) · Checked October 8, 2026
Baltimore Fence Installation Pricing — 2026 Local Market
Fence installation cost in Baltimore, MD: $3,000-$5,060 (typical job: 150 linear ft).
Fence posts and rules in Baltimore
NOAA's climate normals count about 93 freezing nights a year in Baltimore, against 93 at the median Maryland station and 124 at the median U.S. station.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Call 811 a few days before digging so buried utility lines get marked; it's free.
| Nights at or below 32°F | 93 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Maryland) | Maryland Home Improvement Commission license |
| Where to check a license | Maryland Department of Labor |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Baltimore
Fence rules in Baltimore
| Rule | Value |
|---|---|
| Front yard | 4 ft (front or corner-side yard) |
| Back and side yard | 6 ft (rear or interior-side yard) |
| Setback | Fence must be on the owner's lot unless neighbors agree in writing to a line fence (Building Code 3118) |
How Baltimore compares with nearby cities
Labor rates
For fence installation in Baltimore, contractors bill about $46-$60 per worker-hour for fence erectors, whose median pay is $23.07 an hour, about the U.S. median. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Baltimore
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Baltimore, MD?
Fence installation cost in Baltimore, MD: $3,000-$5,060 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Baltimore-Columbia-Towson area compare with the national median?
Median pay for construction laborers in the Baltimore-Columbia-Towson, MD metro area is 1% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Baltimore city?
NOAA logged 33 thunderstorm wind reports of 58 mph or more in Baltimore city from 2016 to 2025.
How much snow does Baltimore get in a typical year?
About 19.3 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Baltimore prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Baltimore City Zoning Code Table 15-601, Permitted Encroachments into Required Yards, checked 2026-10-26 (https://codes.baltimorecity.gov/us/md/cities/baltimore/code/32/zoning-tables/15-601)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Maryland Department of Labor source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Baltimore (1.12×). How we estimate