Fence Installation Cost in Shreveport, LA: 2026 Local Guide

Typical Shreveport job · 150 linear ft
$3,060-$5,140About the U.S. price

Most Shreveport homeowners pay $3,060-$5,140 for 150 linear ft of new fence, in line with what the same job costs nationally.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$820-$1,530
Most common
Wood privacy, 6 ft pressure-treated
$3,060-$5,140
Premium
Composite privacy, 6 ft
$6,440-$10,030
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Shreveport the range runs from $680-$1,100 for 25 linear ft to $7,840-$13,230 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$680-$1,100
50 linear ft$1,150-$1,910
100 linear ft$2,110-$3,530
150 linear ftMost common$3,060-$5,140
200 linear ft$4,020-$6,760
300 linear ft$5,930-$9,990
400 linear ft$7,840-$13,230

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Shreveport. Farm wire or electric runs $820-$1,530, about 71% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,440-$10,030.

TypeTypical jobInstalled
Farm wire or electric$820-$1,530$4.16-$8.25 installed
Split rail (2-3 rail)$1,550-$2,290$9.02-$13.29 installed
Chain link, 4 ft galvanized$2,530-$3,720$15.54-$22.86 installed
Wood privacy, 6 ft pressure-treatedMost common$3,060-$5,140$19.09-$32.34 installed
Wood picket, 4 ft$3,310-$4,690$20.72-$29.30 installed
Cedar privacy, 6 ft$3,750-$5,750$23.70-$36.40 installed
Vinyl privacy, 6 ft$3,930-$6,330$24.85-$40.21 installed
Steel ornamental, 4-5 ft$4,410-$6,710$28.09-$42.80 installed
Aluminum ornamental, 4-5 ft$4,590-$6,680$29.30-$42.55 installed
Composite privacy, 6 ft$6,440-$10,030$41.57-$64.91 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Shreveport fence cost?

We have already loaded Shreveport prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Shreveport is "Drive gate (double)" at $1,390-$3,170 each, so ask whether it is included.

  • Walk gate$344-$653 / each
  • Drive gate (double)$1,390-$3,170 / each
  • Remove old fence$4.22-$5.49 / linear ft
  • Sloped or rocky ground (extra per ft)$2.78-$4.59 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Shreveport different for this job

Shreveport homes and the local housing stock

A fence against the value of a Shreveport home

In Shreveport, a city of mostly houses (71% of units), a fence is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

The midpoint price of a new fence works out to about 2.3% of what the median Shreveport home is worth ($178,900), the 15th highest of the 147 markets NumeralQ covers. Only 14 come out higher.

Local planning note for Shreveport

How Shreveport compares with nearby cities

Of the three, Shreveport is where a new fence takes the biggest bite of a home's value: 2.3% of the median home, against 1.7% in Baton Rouge and 1.3% in New Orleans. That's mostly lower home values, not higher prices.

If you're comparing new fence bids from Baton Rouge or New Orleans with bids from Shreveport, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.Permit for a 150 ft fence
Shreveport$4,1002.3%+8% (state figure)Not published
Baton Rouge$4,1001.7%+8% (state figure)$250
New Orleans$4,1001.3%+8% (state figure)Not published

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Shreveport Fence Installation Pricing — 2026 Local Market

Fence installation cost in Shreveport, LA: $3,060-$5,140 (typical job: 150 linear ft).

Shreveport's climate and fence work

Shreveport averages 29 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 26 across Louisiana weather stations and 124 across U.S. stations.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Shreveport at a glance
Nights at or below 32°F29
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Louisiana)Home improvement registration ($7,500 to $75,000); residential license above $75,000
Where to check a licenseLouisiana State Licensing Board for Contractors

Local data checked October 2026 · Sources at the bottom of the page

Fence permits and heights in Shreveport

In Shreveport, the development code requires a building permit for all fences, including repairs to existing fences. In residential districts, an open fence may be up to 6 feet in front and corner side yards, while solid fences, walls or hedges are limited to 3 feet in the front yard and 6 feet in corner side yards, and interior side and rear yard fences may be up to 8 feet.

The code's definition of an open fence decides which front-yard limit applies, and all posts and footings must be within the lot.

Shreveport Unified Development Code Sec. 7.3.L: Fences and Walls · Checked October 10, 2026

Nearby pricing

How Shreveport compares with nearby cities

Labor

Labor rates

For fence installation in Shreveport, contractors bill about $50-$65 per worker-hour for fence erectors, whose median pay is $24.89 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$24.89/hrMedian pay
$50-$65/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Shreveport

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Shreveport, LA?

Fence installation cost in Shreveport, LA: $3,060-$5,140 (typical job: 150 linear ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Shreveport-Bossier City area compare with the national median?

Median pay for construction laborers in the Shreveport-Bossier City, LA metro area is 18% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Caddo Parish?

NOAA logged 271 thunderstorm wind reports of 58 mph or more in Caddo Parish from 2016 to 2025.

How much snow does Shreveport get in a typical year?

About 0.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Shreveport prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

NumeralQ planning estimate. How we estimate

$3,060-$5,140NumeralQ planning estimate
Get my estimate