Deck or patio cost by size
Find your size in the table. In Rockford the range runs from $1,860-$2,570 for 10 x 10 ft to $11,140-$15,400 for 20 x 30 ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,860-$2,570 |
| 12 x 12 ft | $2,670-$3,700 |
| 12 x 16 ft | $3,570-$4,930 |
| 16 x 16 ft | $4,750-$6,570 |
| 16 x 20 ftMost common | $5,940-$8,210 |
| 20 x 20 ft | $7,430-$10,270 |
| 20 x 30 ft | $11,140-$15,400 |
Installed: Deck: pressure-treated wood
Deck or patio cost by material or type
Material choice is the second big lever in Rockford. Patio: gravel runs $2,580-$3,640, about 56% under deck: pressure-treated wood, while deck: ipe hardwood costs $13,460-$19,230.
| Type | Typical job | Installed |
|---|---|---|
| Patio: gravel | $2,580-$3,640 | $8.06-$11.37 installed |
| Patio: plain concrete | $2,980-$3,950 | $9.32-$12.35 installed |
| Patio: brick pavers | $4,900-$6,710 | $15.31-$20.98 installed |
| Patio: flagstone | $5,100-$12,490 | $15.93-$39.03 installed |
| Patio: stamped concrete | $5,410-$7,180 | $16.90-$22.44 installed |
| Patio: concrete pavers | $5,600-$7,670 | $17.51-$23.97 installed |
| Deck: pressure-treated woodMost common | $5,940-$8,210 | $18.57-$25.66 installed |
| Patio: slate | $6,750-$10,470 | $21.08-$32.72 installed |
Show 9 more options
| Type | Typical job | Installed |
|---|---|---|
| Deck: cedar | $7,030-$10,200 | $21.98-$31.86 installed |
| Patio: porcelain pavers | $7,040-$10,570 | $22.00-$33.03 installed |
| Patio: travertine pavers | $7,140-$9,520 | $22.31-$29.76 installed |
| Patio: bluestone | $7,740-$12,050 | $24.19-$37.65 installed |
| Deck: redwood | $9,610-$13,180 | $30.03-$41.19 installed |
| Deck: aluminum | $10,550-$13,950 | $32.97-$43.61 installed |
| Deck: composite | $10,750-$15,540 | $33.61-$48.56 installed |
| Deck: PVC | $11,700-$15,500 | $36.58-$48.43 installed |
| Deck: ipe hardwood | $13,460-$19,230 | $42.06-$60.08 installed |
Materials include waste and contractor markup. Typical job: 320 sq ft
What will your Rockford deck or patio cost?
We have already loaded Rockford prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 8 extras are where quotes most often grow. The largest single line in Rockford is "Pergola or cover structure" at $4,990-$8,840 for the job, so ask whether it is included.
- Railing: wood$38.73-$52.76 / linear ft
- Railing: aluminum or steel$53.94-$91.26 / linear ft
- Railing: composite$100-$172 / linear ft
- Railing: cable$116-$192 / linear ft
- Railing: glass$141-$238 / linear ft
- Stairs (per step, wood, pre-cut stringers)$124-$208 / step
- Footing (poured concrete)$237-$405 / each
- Pergola or cover structure$4,990-$8,840 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Railing: wood | $12.07-$18.11 / linear ft |
| Railing: aluminum or steel | $30.19-$60.38 / linear ft |
| Railing: composite | $60-$121 / linear ft |
| Railing: cable | $85-$151 / linear ft |
| Railing: glass | $97-$181 / linear ft |
| Stairs (per step, wood, pre-cut stringers) | $33.81-$90.56 / step |
| Footing (poured concrete) | $57-$173 / each |
| Pergola or cover structure | $1,720-$4,600 / job |
Installed price per unit
What makes Rockford different for this job
Rockford homes and the local housing stock
A deck against the value of a Rockford home
66% of Rockford units are houses with their own lots, and 55% of homes are owner-occupied, so a deck is usually the owner's call, subject to HOA rules where they apply.
At the midpoint of the range above, a typical deck or patio costs about 5.5% of Rockford's $129,000 median home value, the 4th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.
Local planning note for Rockford
Rockford, Aurora and Naperville side by side
Of the three, Rockford is where a deck or patio takes the biggest bite of a home's value: 5.5% of the median home, against 2.7% in Aurora and 1.4% in Naperville. That's mostly lower home values, not higher prices.
Comparing Rockford with its neighbors, BLS puts carpenters' median pay 33% above the U.S. median in Aurora but 20% above the U.S. median in Rockford, a gap that tends to show up in deck or patio quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. | Permit for a $15,000 remodel |
|---|---|---|---|---|
| Rockford | $7,075 | 5.5% | +20% | $132 |
| Aurora | $7,500 | 2.7% | +33% | Not published |
| Naperville | $7,500 | 1.4% | +33% | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Rockford's ground and weather for decks
NOAA's climate normals count about 136 freezing nights a year in Rockford, compared with medians of 122 across Illinois weather stations and 124 across U.S. stations.
Ask the building department for Rockford's frost depth. The model code requires deck footings to sit below it, and at least 12 inches down.
The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.
Yearly precipitation runs about 37.2 inches here, against 37.5 at the median U.S. station.
| Nights at or below 32°F | 136 |
|---|---|
| Yearly precipitation | 37.2 in |
| Climate zone (county) | 5A |
| Contractor license (Illinois) | No state general contractor license; cities license (e.g., Chicago) |
| Where to check a license | Illinois IDFPR (roofing); city for other trades |
Local data checked October 2026 · Sources at the bottom of the page
When a deck needs a permit in Rockford
City rule
In Rockford, the city's FAQ says a one-story detached deck with no more than 120 square feet of floor area, not supported by another structure, needs no building permit, and neither do patios no more than 30 inches above adjacent grade that are not over a basement. The city also states that frost footings must be 42 inches below grade.
Decks must also meet zoning setbacks, which were not reviewed here.
City of Rockford: Construction and Development Services FAQs · Checked October 10, 2026
How Rockford compares with nearby cities
Labor rates
For deck or patio in Rockford, contractors bill about $70-$91 per worker-hour for carpenters, whose median pay is $34.99 an hour. The difference covers insurance, taxes, overhead and profit.
Carpenters
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Rockford
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Frequently Asked Questions
How much does Deck & Patio cost in Rockford, IL?
Deck or patio cost in Rockford, IL: $5,940-$8,210 (typical job: 320 sq ft). The table near the top of the page prices each option separately.
How does pay for carpenters in the Rockford area compare with the national median?
Median pay for carpenters in the Rockford, IL metro area is 20% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Winnebago County?
NOAA logged 127 thunderstorm wind reports of 58 mph or more in Winnebago County from 2016 to 2025.
How much snow does Rockford get in a typical year?
About 37.1 inch a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Rockford prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://rockfordil.gov/DocumentCenter/View/4351/2025-Fee-Schedule-PDF
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- DOE climate zone guide source
- Illinois IDFPR (roofing); city for other trades source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Rockford (1.01×). How we estimate