Heat pump cost by size
The biggest driver is size: 1.5 tons costs $4,920-$7,740 in Illinois, while 5 tons costs $10,140-$17,090, about 115% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 1.5 tons | $4,920-$7,740 |
| 2 tons | $5,660-$9,080 |
| 2.5 tons | $6,410-$10,410 |
| 3 tonsMost common | $7,160-$11,750 |
| 3.5 tons | $7,900-$13,080 |
| 4 tons | $8,650-$14,420 |
| 5 tons | $10,140-$17,090 |
Heat pump cost by material or type
In Illinois, ductless mini-split, single zone comes in about 53% under air-source heat pump, ducted, and geothermal (ground-source) with loop runs roughly 2.9 times the price, so get each option you are weighing priced on the same quote (air-source heat pump, ducted here: $7,160-$11,750).
What will your Illinois heat pump cost?
We have already loaded Illinois prices for this heat pump installation estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Aurora | $7,180-$11,770 | Aurora |
| Chicago | $7,180-$11,770 | Chicago |
| Naperville | $7,180-$11,770 | Naperville |
| Rockford | $7,070-$11,640 | Rockford |
State conditions
Local planning note for Illinois
Comparing Illinois's cities beyond the price
For heat pump installs, pay for HVAC technicians ranges from 23% above the U.S. median in Rockford to 28% above the U.S. median in Aurora, a 5-point gap that shows up most in labor-heavy bids. Only Rockford publishes a permit fee we could price for the standard job, about $116. Elsewhere in Illinois, ask the building department before you sign.
Electric heat already covers 18% of homes in Chicago but only 12% in Naperville, where a heat pump more often replaces a gas furnace and may need a panel upgrade. Next to what homes are worth, Rockford is the most expensive place in Illinois to do this job (7.3% of the median home value) and Naperville the least (1.8%).
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with electricity | Typical job as share of median home value |
|---|---|---|---|---|
| Aurora | +28% | Not published | 15% | 3.4% |
| Chicago | +28% | Not published | 18% | 2.8% |
| Naperville | +28% | Not published | 12% | 1.8% |
| Rockford | +23% | $116 | 15% | 7.3% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
On a heat pump installation job in Illinois, HVAC technicians earn a median $37.21 an hour. After insurance, payroll taxes and overhead, contractors bill about $74-$97 per worker-hour.
Before you sign in Illinois
Get every quote to include
- equipment model, capacity, controls, and documented load calculation
- existing ductwork, electrical service, and any backup-heat scope
- removal, startup, commissioning, and operating instructions
- who checks and documents any required permits or inspections
Local planning note for Illinois
How Illinois lien law affects a heat pump install
A mechanic's lien is a claim against your house by someone who worked on your heat pump install or supplied material for it and wasn't paid. In Illinois you're protected only if you ask the contractor for a sworn statement listing subs and suppliers before you pay (770 ILCS 60/5). Subs on an owner-occupied single-family home must notify you within 60 days of first work (60/21).
Request the sworn statement in writing with each payment request and pay subs by joint check or against their waivers. For a heat pump install, expect any lien notice to come from the equipment distributor or from an electrician the installer brought in for the panel work.
Frequently Asked Questions
What does a heat pump cost in Illinois?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Illinois?
Not much. Across the 4 Illinois cities we cover, pay for HVAC technicians stays within a few points, from 23% above the national median in Rockford to 28% above in Aurora (BLS, May 2025).
How do Illinois electricity prices affect a heat pump?
At those prices, a heat pump costs more to run than gas.
What heat pump efficiency should I look for in Illinois?
The federal minimum is 7.5 HSPF2 for heating and 13.4 SEER2 for cooling in Illinois's region (DOE). Higher HSPF2 numbers cut winter bills more.
Which refrigerant should a new heat pump use?
R-454B or R-32. EPA rules phased out R-410A in new home systems starting in 2025, so ask which refrigerant each quote uses.
Ready for your own number?
We have already loaded Illinois prices for this heat pump installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Nicor Gas, checked 2026-10-26 (https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- Levelset, Illinois lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/illinois-lien-law-faqs/)
Installed: Air-source heat pump, ducted