Deck or patio cost by size
Size moves the price more than anything else. In Marietta, going from 10 x 10 ft to 20 x 30 ft takes the job from $1,520-$2,130 to $9,140-$12,800, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,520-$2,130 |
| 12 x 12 ft | $2,190-$3,070 |
| 12 x 16 ft | $2,930-$4,100 |
| 16 x 16 ft | $3,900-$5,460 |
| 16 x 20 ftMost common | $4,880-$6,830 |
| 20 x 20 ft | $6,100-$8,530 |
| 20 x 30 ft | $9,140-$12,800 |
Installed: Deck: pressure-treated wood
Deck or patio cost by material or type
In Marietta, patio: plain concrete comes in about 56% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.4 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $4,880-$6,830).
| Type | Typical job | Installed |
|---|---|---|
| Patio: plain concrete | $2,210-$2,950 | $6.92-$9.22 installed |
| Patio: gravel | $2,620-$3,690 | $8.19-$11.54 installed |
| Patio: stamped concrete | $3,870-$5,180 | $12.09-$16.19 installed |
| Patio: brick pavers | $3,890-$5,400 | $12.14-$16.86 installed |
| Patio: concrete pavers | $4,170-$5,810 | $13.03-$18.14 installed |
| Patio: flagstone | $4,610-$11,850 | $14.40-$37.04 installed |
| Deck: pressure-treated woodMost common | $4,880-$6,830 | $15.24-$21.33 installed |
| Patio: slate | $5,110-$8,340 | $15.97-$26.07 installed |
Show 9 more options
| Type | Typical job | Installed |
|---|---|---|
| Patio: porcelain pavers | $5,140-$8,100 | $16.06-$25.30 installed |
| Patio: travertine pavers | $5,660-$7,600 | $17.69-$23.75 installed |
| Deck: cedar | $5,880-$8,700 | $18.38-$27.18 installed |
| Patio: bluestone | $5,880-$9,630 | $18.38-$30.09 installed |
| Deck: redwood | $8,040-$11,150 | $25.14-$34.83 installed |
| Deck: composite | $8,780-$12,970 | $27.44-$40.54 installed |
| Deck: PVC | $9,500-$12,640 | $29.70-$39.49 installed |
| Deck: aluminum | $9,520-$12,610 | $29.75-$39.42 installed |
| Deck: ipe hardwood | $11,370-$16,520 | $35.55-$51.62 installed |
Materials include waste and contractor markup. Typical job: 320 sq ft
What will your Marietta deck or patio cost?
We have already loaded Marietta prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 8 extras are where quotes most often grow. The largest single line in Marietta is "Pergola or cover structure" at $4,000-$7,560 for the job, so ask whether it is included.
- Railing: wood$30.64-$42.25 / linear ft
- Railing: aluminum or steel$46.73-$81.89 / linear ft
- Railing: composite$88-$157 / linear ft
- Railing: cable$107-$180 / linear ft
- Railing: glass$127-$221 / linear ft
- Stairs (per step, wood, pre-cut stringers)$97-$173 / step
- Footing (poured concrete)$182-$335 / each
- Pergola or cover structure$4,000-$7,560 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Railing: wood | $12.07-$18.11 / linear ft |
| Railing: aluminum or steel | $30.19-$60.38 / linear ft |
| Railing: composite | $60-$121 / linear ft |
| Railing: cable | $85-$151 / linear ft |
| Railing: glass | $97-$181 / linear ft |
| Stairs (per step, wood, pre-cut stringers) | $33.81-$90.56 / step |
| Footing (poured concrete) | $57-$173 / each |
| Pergola or cover structure | $1,720-$4,600 / job |
Installed price per unit
What makes Marietta different for this job
Marietta homes and the local housing stock
Marietta yards and who owns them
In Marietta, a city of mostly houses (55% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.
High home values make the deck or patio a small slice in Marietta: about 1.3% of the $448,500 median home, the 35th lowest among the 147 markets we price.
Local planning note for Marietta
Marietta next to Atlanta and Savannah
Marietta ties with Atlanta at 1.3% of the median home value for a typical deck or patio.
Comparing Marietta with its neighbors, BLS puts carpenters' median pay 16% below the U.S. median in Marietta but 26% below the U.S. median in Savannah, a gap that tends to show up in deck or patio quotes.
Marietta has the lowest permit fee of the three for a deck or patio: $125 for the standard job, against $175 in Atlanta and $150 in Savannah.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. | Permit for a $15,000 remodel |
|---|---|---|---|---|
| Marietta | $5,855 | 1.3% | -16% | $125 |
| Atlanta | $5,855 | 1.3% | -16% | $175 |
| Savannah | $5,530 | 2.2% | -26% | $150 |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Deck footings and permits in Marietta
Marietta averages 52 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 46 at the median Georgia station and 124 at the median U.S. station.
The residential code puts deck footings at least 12 inches into undisturbed soil and below the local frost line; the building department sets that depth for Marietta.
The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.
The station also averages 48.1 inch of rain and melted snow a year (U.S. median: 37.5).
| Nights at or below 32°F | 52 |
|---|---|
| Yearly precipitation | 48.1 in |
| Climate zone (county) | 3A |
| Contractor license (Georgia) | Residential contractor license for jobs over $2,500 |
| Where to check a license | Georgia Secretary of State licensing boards |
Local data checked October 2026 · Sources at the bottom of the page
Permits in Marietta
In Marietta even a deck repair or rebuild needs a permit, not just a new deck. The fee is easy to estimate: the city charges a $50 base fee plus $5 for every $1,000 of construction cost, so about $125 on a $15,000 deck, with no separate plan review charge.
How Marietta compares with nearby cities
Labor rates
On a deck or patio job in Marietta, carpenters earn a median $24.37 an hour. After insurance, payroll taxes and overhead, contractors bill about $49-$63 per worker-hour.
Carpenters
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Marietta
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Frequently Asked Questions
How much does Deck & Patio cost in Marietta, GA?
Deck or patio cost in Marietta, GA: $4,880-$6,830 (typical job: 320 sq ft). The table above breaks it out by option.
How does pay for carpenters in the Atlanta-Sandy Springs-Roswell area compare with the national median?
Median pay for carpenters in the Atlanta-Sandy Springs-Roswell, GA metro area is 16% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Cobb County?
NOAA logged 57 thunderstorm wind reports of 58 mph or more in Cobb County from 2016 to 2025.
How much snow does Marietta get in a typical year?
About 1.2 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Marietta prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://www.mariettaga.gov/443/Building-Permits
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- NOAA climate normals source
- International Residential Code source
- DOE climate zone guide source
- Georgia Secretary of State licensing boards source
- NOAA Storm Events Database source
- Permit source — Marietta
This estimate is NumeralQ's national baseline with a Marietta adjustment of 0.94×. How we estimate