Insulation cost by size
Find your size in the table. In Atlanta the range runs from $710-$1,170 for 500 sq ft to $3,010-$4,970 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 500 sq ft | $710-$1,170 |
| 1,000 sq ftMost common | $1,290-$2,120 |
| 1,500 sq ft | $1,860-$3,070 |
| 2,000 sq ft | $2,440-$4,020 |
| 2,500 sq ft | $3,010-$4,970 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
In Atlanta, radiant barrier (attic) comes in about 26% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,290-$2,120).
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $920-$1,600 | $0.79-$1.38 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,290-$2,120 | $1.15-$1.90 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,290-$2,120 | $1.15-$1.90 installed |
| Fiberglass batts, walls (R-13) | $1,470-$1,890 | $1.34-$1.67 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,730-$4,180 | $1.60-$3.97 installed |
| Fiberglass batts, attic floor (R-30) | $2,080-$2,430 | $1.94-$2.22 installed |
| Spray foam, open-cell (3.5 in.) | $2,240-$3,320 | $2.11-$3.10 installed |
| Dense-pack cellulose, existing walls | $2,600-$3,580 | $2.46-$3.36 installed |
| Mineral wool batts (R-15) | $2,610-$3,620 | $2.47-$3.40 installed |
| Spray foam, closed-cell (2 in.) | $3,860-$5,450 | $3.72-$5.24 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your Atlanta insulation project cost?
We have already loaded Atlanta prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 2 extras are where quotes most often grow. The largest single line in Atlanta is "Air sealing (attic)" at $723-$1,080 for the job, so ask whether it is included.
- Remove old insulation$1.42-$1.91 / sq ft
- Air sealing (attic)$723-$1,080 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes Atlanta different for this job
Atlanta homes and the local housing stock
How old Atlanta homes are, and what that means for insulation
Room count drives the size of insulation jobs, and the median Atlanta home has 4.5 (bathrooms excluded) compared with 5.2 for Marietta and Savannah. For insulation jobs in Atlanta, start with the age of the house. The median home here dates to 1989; for Marietta and Savannah it is 1979.
Most Atlanta homes were built in 1989 or later, under an energy code, so attics usually have some insulation already. The job is often a top-up rather than a full install.
High home values make the insulation job a small slice in Atlanta: about 0.4% of the $439,600 median home, the 49th lowest among the 147 markets we price.
Local planning note for Atlanta
How Atlanta compares with nearby cities
Atlanta ties with Marietta at 0.4% of the median home value for a typical insulation job.
Comparing Atlanta with its neighbors, BLS puts insulation workers' median pay 11% above the U.S. median in Atlanta but 11% below the U.S. median in Savannah, a gap that tends to show up in insulation job quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| Atlanta | $1,705 | 0.4% | +11% |
| Marietta | $1,705 | 0.4% | +11% |
| Savannah | $1,570 | 0.6% | -11% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Atlanta's climate and insulation
ENERGY STAR's attic recommendation for climate zone 3A, which covers Fulton County, is R49 to R60.
A typical year in Atlanta brings 2,775 heating degree days and 1,825 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.
The median Georgia weather station logs 2,454 and 2,037; the median U.S. station, 5,483 and 848.
New construction in Georgia follows the 2015 IECC with state changes; retrofit jobs are often not inspected, so get the installed R-value in writing.
| Climate zone (county) | 3A |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 2,775 / 1,825 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (Georgia) | Residential contractor license for jobs over $2,500 |
| Where to check a license | Georgia Secretary of State licensing boards |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Atlanta
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
Georgia Power attic-insulation program requirements
Utility service territory
For Georgia Power residential customers in Atlanta, the Home Energy Improvement Program’s attic-insulation offer requires existing insulation below R-19 and added insulation of R-49 or greater, or improvement to current state code where the structure allows. Dense-pack or wet-spray cellulose and spray foam require a home energy assessment before and after installation; homes with combustion appliances must pass combustion-safety testing. Dense-pack and wet-spray cellulose require a program installer. Other non-air-sealing insulation may be installed by a program installer or by the homeowner.
This applies only to Georgia Power customers; program terms can change.
Georgia Power Home Energy Improvement Program: Precondition and Improvement Requirements, Single Family · Program terms as of October 2026
How Atlanta compares with nearby cities
Labor rates
On an insulation job in Atlanta, insulation workers earn a median $26.31 an hour. After insurance, payroll taxes and overhead, contractors bill about $53-$68 per worker-hour.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Atlanta
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in Atlanta
How many insulation installers work in Atlanta's area
Census business counts for 2023 show 32 drywall and insulation contractors based in Fulton County, the pool most Atlanta homeowners draw on for an insulation job. That's 0.6 per 10,000 homes, 54% below the U.S. rate of 1.4, the 13th lowest among the 135 counties on this site. The Census counts drywall and insulation firms together, so not every one of them does insulation.
Fewer insulation installers per home can mean longer waits in busy months, so book an insulation job in Atlanta early and consider firms from neighboring counties.
Frequently Asked Questions
How much does Insulation cost in Atlanta, GA?
Insulation cost in Atlanta, GA: $1,290-$2,120 (typical job: 1,000 sq ft). Each option in the price table above has its own range.
How does pay for construction laborers in the Atlanta-Sandy Springs-Roswell area compare with the national median?
Median pay for construction laborers in the Atlanta-Sandy Springs-Roswell, GA metro area is 11% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in Atlanta?
About 43% were built before 1980, according to the Census Bureau, against 32% across Georgia and 50% nationally.
How do most Atlanta homes heat?
About 40% heat mainly with piped gas and 58% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded Atlanta prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Georgia Power, checked 2026-10-26 (https://www.georgiapower.com/residential/solutions/home-solutions/heip.html)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- ENERGY STAR source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
- Georgia Secretary of State licensing boards source
We start from a national baseline and adjust it for Atlanta (0.94×). How we estimate