Fence Installation Cost in Atlanta, GA: 2026 Local Guide

Typical Atlanta job · 150 linear ft
$2,960-$5,000About the U.S. price

In Atlanta, 150 linear ft of new fence usually costs $2,960-$5,000, close to the national typical job.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$740-$1,420
Most common
Wood privacy, 6 ft pressure-treated
$2,960-$5,000
Premium
Composite privacy, 6 ft
$6,320-$9,880
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Atlanta the range runs from $640-$1,060 for 25 linear ft to $7,580-$12,890 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$640-$1,060
50 linear ft$1,110-$1,850
100 linear ft$2,030-$3,430
150 linear ftMost common$2,960-$5,000
200 linear ft$3,880-$6,580
300 linear ft$5,730-$9,740
400 linear ft$7,580-$12,890

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Atlanta. Farm wire or electric runs $740-$1,420, about 73% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,320-$9,880.

TypeTypical jobInstalled
Farm wire or electric$740-$1,420$3.72-$7.67 installed
Split rail (2-3 rail)$1,460-$2,160$8.50-$12.62 installed
Chain link, 4 ft galvanized$2,360-$3,500$14.51-$21.52 installed
Wood privacy, 6 ft pressure-treatedMost common$2,960-$5,000$18.50-$31.56 installed
Wood picket, 4 ft$3,070-$4,370$19.23-$27.36 installed
Cedar privacy, 6 ft$3,640-$5,610$23.07-$35.58 installed
Vinyl privacy, 6 ft$3,820-$6,180$24.23-$39.41 installed
Steel ornamental, 4-5 ft$4,230-$6,480$27.00-$41.38 installed
Aluminum ornamental, 4-5 ft$4,500-$6,560$28.81-$41.92 installed
Composite privacy, 6 ft$6,320-$9,880$40.91-$64.05 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Atlanta fence cost?

We have already loaded Atlanta prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 4 items your quote includes. The costliest line in Atlanta is "Drive gate (double)" at $1,290-$3,040 each.

  • Walk gate$314-$615 / each
  • Drive gate (double)$1,290-$3,040 / each
  • Remove old fence$3.70-$4.81 / linear ft
  • Sloped or rocky ground (extra per ft)$2.51-$4.24 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Atlanta different for this job

Atlanta homes and the local housing stock

Atlanta lots and fences

With 59% of units in multi-unit buildings, a fence in Atlanta often needs association approval, and HOA rules can set materials and colors.

High home values make the new fence a small slice in Atlanta: about 0.9% of the $439,600 median home, the 45th lowest among the 147 markets we price.

Local planning note for Atlanta

Atlanta next to Marietta and Savannah

Against home values, a new fence costs Atlanta and Marietta owners the same share, 0.9% of the median home, while Savannah is at 1.5%.

For a new fence in Atlanta or next door, pay for fence installers is where the three split most: Atlanta is 6% below the U.S. median and Savannah is 23% below the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.Permit for a 150 ft fence
Atlanta$3,9800.9%-6%Not published
Marietta$3,9800.9%-6%Not published
Savannah$3,8151.5%-23% (state figure)$40

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Before you fence in Atlanta

Atlanta averages 52 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 46 across Georgia weather stations and 124 across U.S. stations.

In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Atlanta at a glance
Nights at or below 32°F52
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Georgia)Residential contractor license for jobs over $2,500
Where to check a licenseGeorgia Secretary of State licensing boards

Local data checked October 2026 · Sources at the bottom of the page

Tree removal permits in Atlanta

In Atlanta, removing a regulated tree on public or private property requires a permit from the city arborist first. On private property, a regulated tree is any non-pine tree 6 inches or more in diameter at breast height, or any pine 12 inches or more, under the tree protection ordinance rewritten in June 2025. Anyone removing a regulated tree must also meet the city's replanting requirements.

Dead, dying, hazardous and invasive trees have separate permit paths; ask the city arborist which applies.

Atlanta Code Ch. 158, Art. II: Tree Protection (Secs. 158-26, 158-49; Ord. 2025-19) · Checked October 8, 2026

Permits in Atlanta

Atlanta's Office of Buildings permits new and replacement residential fences through its Express process, with a site plan drawn on a survey of the lot. In most single-family zones, the city allows 4 feet in the front yard, kept at least half open for chain link, wrought iron or picket styles, and 6 feet along the sides and back. Anything taller needs a variance, and historic districts add their own review.

Fence height limits in Atlanta

In Atlanta's R-1 through R-5 zoning districts, fences in required front and half-depth front yards may be no taller than 4 feet, and fences or walls in side and rear yards no taller than 6 feet; in R-G districts the side and rear limit is 8 feet. In any residential district, no fence or wall over 2.5 feet is allowed within 20 feet of a street intersection.

Many Atlanta historic and special districts set their own fence rules, and the city is rewriting its zoning code; confirm before building.

Atlanta Zoning Ordinance Sec. 16-28.008: Required yards and open space · Checked October 8, 2026

Nearby pricing

How Atlanta compares with nearby cities

Labor

Labor rates

For fence installation in Atlanta, contractors bill about $44-$57 per worker-hour for fence erectors, whose median pay is $21.80 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$21.80/hrMedian pay
$44-$57/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Atlanta

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Atlanta, GA?

Fence installation cost in Atlanta, GA: $2,960-$5,000 (typical job: 150 linear ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Atlanta-Sandy Springs-Roswell area compare with the national median?

Median pay for construction laborers in the Atlanta-Sandy Springs-Roswell, GA metro area is 6% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Fulton County?

NOAA logged 128 thunderstorm wind reports of 58 mph or more in Fulton County from 2016 to 2025.

How much snow does Atlanta get in a typical year?

About 0.5 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Atlanta prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

This estimate is NumeralQ's national baseline with a Atlanta adjustment of 0.94×. How we estimate

$2,960-$5,000NumeralQ planning estimate
Get my estimate