Insulation Cost in Orlando, FL: 2026 Local Guide

Typical Orlando job · 1,000 sq ft
$1,200-$2,010About the U.S. price

Most Orlando homeowners pay $1,200-$2,010 for insulating 1,000 sq ft, close to the national typical job.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$850-$1,510
Most common
Blown-in fiberglass, attic (R-38)
$1,200-$2,010
Premium
Spray foam, closed-cell (2 in.)
$3,640-$5,180
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

Size moves the price more than anything else. In Orlando, going from 500 sq ft to 2,500 sq ft takes the job from $660-$1,100 to $2,830-$4,730, so have the size measured before comparing quotes.

SizeCost
500 sq ft$660-$1,100
1,000 sq ftMost common$1,200-$2,010
1,500 sq ft$1,750-$2,920
2,000 sq ft$2,290-$3,820
2,500 sq ft$2,830-$4,730

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

Material choice is the second big lever in Orlando. Radiant barrier (attic) runs $850-$1,510, about 26% under blown-in fiberglass, attic (R-38), while spray foam, closed-cell (2 in.) costs $3,640-$5,180.

TypeTypical jobInstalled
Radiant barrier (attic)$850-$1,510$0.73-$1.31 installed
Blown-in fiberglass, attic (R-38)Most common$1,200-$2,010$1.08-$1.81 installed
Blown-in cellulose, attic (R-38)Most common$1,200-$2,010$1.08-$1.81 installed
Fiberglass batts, walls (R-13)$1,390-$1,780$1.27-$1.58 installed
Rigid foam board (R-5 per inch, 2 in.)$1,680-$4,110$1.56-$3.91 installed
Fiberglass batts, attic floor (R-30)$2,030-$2,370$1.91-$2.17 installed
Spray foam, open-cell (3.5 in.)$2,100-$3,140$1.98-$2.94 installed
Dense-pack cellulose, existing walls$2,390-$3,310$2.27-$3.11 installed
Mineral wool batts (R-15)$2,550-$3,550$2.43-$3.35 installed
Spray foam, closed-cell (2 in.)$3,640-$5,180$3.52-$4.98 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Orlando insulation project cost?

We have already loaded Orlando prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 2 extras are where quotes most often grow. The largest single line in Orlando is "Air sealing (attic)" at $638-$968 for the job, so ask whether it is included.

  • Remove old insulation$1.23-$1.66 / sq ft
  • Air sealing (attic)$638-$968 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Orlando different for this job

Orlando homes and the local housing stock

Orlando homes and insulation

Orlando insulation jobs happen in homes newer than those in the other Florida cities NumeralQ covers: half were built in 1992 or earlier, against 1979 there. Orlando insulation jobs cover homes with a median of 4.6 rooms, not counting bathrooms or halls, against 4.8 for the other Florida cities NumeralQ covers.

A typical insulation job at the midpoint price equals roughly 0.4% of what the median Orlando home is worth ($394,100), 93rd of the 147 markets NumeralQ covers.

Because the median home dates to 1992, an Orlando attic usually has code-era insulation in it. Ask the installer to measure it, since topping up costs less than starting from bare joists.

Local planning note for Orlando

Orlando next to Tampa and St. Petersburg

Against home values, an insulation job weighs about the same in Orlando, Tampa and St. Petersburg: 0.4% of the median home here, 0.4% and 0.4% next door.

If you're comparing insulation job bids from Tampa or St. Petersburg with bids from Orlando, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for insulation workers vs U.S.
Orlando$1,6050.4%-4%
Tampa$1,6050.4%-4% (state figure)
St. Petersburg$1,6050.4%-4% (state figure)

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

How much insulation Orlando homes need

ENERGY STAR's attic recommendation for climate zone 2A, which covers Orange County, is R49 to R60.

Orlando averages 525 heating degree days and 3,452 cooling degree days a year, according to NOAA's 1991–2020 climate normals. Degree days measure how much colder or warmer than 65°F each day runs, so they track heating and cooling need.

The median Florida weather station logs 500 and 3,432; the median U.S. station, 5,483 and 848.

Florida builds new homes to the 2023 Florida Building Code energy chapter. For an existing attic, ask the installer to write the installed depth and R-value on the invoice.

Insulation in Orlando at a glance
Climate zone (county)2A
ENERGY STAR attic levelR49 to R60
Heating / cooling degree days525 / 3,452
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Florida)State-certified or locally registered contractor for structural work
Where to check a licenseFlorida DBPR (myfloridalicense.com)

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Orlando compares with nearby cities

Labor

Labor rates

For insulation in Orlando, contractors bill about $45-$59 per worker-hour for insulation workers, whose median pay is $22.65 an hour, 4% below the U.S. median. The difference covers insurance, taxes, overhead and profit.

Insulation Workers, Floor, Ceiling, and Wall

$22.65/hrMedian pay
$45-$59/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Orlando

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Orlando

Contractor competition in Orlando

For insulating an attic or walls in Orlando, the local pool is 163 drywall and insulation contractors in Orange County (Census, 2023): 2.8 per 10,000 homes, 2.0 times the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

More insulation installers per home usually means more bids and shorter waits, so in Orlando it's reasonable to ask for three quotes on an insulation job and to push back on a high one.

Common questions

Frequently Asked Questions

How much does Insulation cost in Orlando, FL?

Insulation cost in Orlando, FL: $1,200-$2,010 (typical job: 1,000 sq ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Orlando-Kissimmee-Sanford area compare with the national median?

Median pay for construction laborers in the Orlando-Kissimmee-Sanford, FL metro area is 4% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Orlando?

About 33% were built before 1980, according to the Census Bureau, against 34% across Florida and 50% nationally.

How do most Orlando homes heat?

About 4% heat mainly with piped gas and 92% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Orlando prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

We start from a national baseline and adjust it for Orlando (1.07×). How we estimate

$1,200-$2,010NumeralQ planning estimate
Get my estimate