Fence installation cost by size
Find your size in the table. In Clearwater the range runs from $640-$1,060 for 25 linear ft to $7,590-$12,900 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $640-$1,060 |
| 50 linear ft | $1,110-$1,850 |
| 100 linear ft | $2,030-$3,430 |
| 150 linear ftMost common | $2,960-$5,010 |
| 200 linear ft | $3,880-$6,590 |
| 300 linear ft | $5,740-$9,750 |
| 400 linear ft | $7,590-$12,900 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Clearwater, farm wire or electric comes in about 73% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,960-$5,010).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $740-$1,420 | $3.73-$7.69 installed |
| Split rail (2-3 rail) | $1,460-$2,170 | $8.51-$12.64 installed |
| Chain link, 4 ft galvanized | $2,360-$3,510 | $14.54-$21.56 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,960-$5,010 | $18.52-$31.58 installed |
| Wood picket, 4 ft | $3,070-$4,380 | $19.28-$27.42 installed |
| Cedar privacy, 6 ft | $3,640-$5,610 | $23.09-$35.60 installed |
| Vinyl privacy, 6 ft | $3,820-$6,190 | $24.25-$39.44 installed |
| Steel ornamental, 4-5 ft | $4,240-$6,490 | $27.04-$41.43 installed |
| Aluminum ornamental, 4-5 ft | $4,510-$6,560 | $28.82-$41.94 installed |
| Composite privacy, 6 ft | $6,320-$9,880 | $40.93-$64.08 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Clearwater fence cost?
We have already loaded Clearwater prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every fence installation job needs these, but ask about each one before you sign. In Clearwater, the biggest line is "Drive gate (double)" at $1,290-$3,040 each.
- Walk gate$315-$616 / each
- Drive gate (double)$1,290-$3,040 / each
- Remove old fence$3.71-$4.83 / linear ft
- Sloped or rocky ground (extra per ft)$2.51-$4.25 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Clearwater different for this job
Clearwater homes and the local housing stock
A fence against the value of a Clearwater home
Only 45% of units in Clearwater are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.
The midpoint of the range above is about 1.1% of Clearwater's $361,300 median home value, the 70th lowest share for a new fence among 147 markets and near the middle of the pack.
Clearwater permit fees for this job
Permit fees: what Clearwater charges
Fences in Clearwater fall under the standard building permit formula, so a $6,000 fence permit costs around $77.
For a new fence, that fee is roughly 2.1% of what the typical job costs in Clearwater. Among 31 cities with a published, priceable fence fee, Clearwater's is the 15th highest. For comparison, Cape Coral charges about $107 for the same fence.
Against home values, a new fence costs Clearwater and St. Petersburg owners the same share, 1.1% of the median home, while Tampa is at 0.9%.
Getting new fence bids from outside Clearwater? The St. Petersburg and Tampa pages below show the full price ranges there.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| Clearwater | $3,985 | 1.1% | -5% (state figure) | $76 |
| St. Petersburg | $3,985 | 1.1% | -5% (state figure) | Not published |
| Tampa | $3,985 | 0.9% | -5% (state figure) | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Local rules and records for Clearwater
Fence rules in Clearwater
| Rule | Value |
|---|---|
| Permit needed | Permit required; install within six months |
| Survey | yes (fence location marked on a survey) |
| Pool barrier | 48 in |
Fence posts and rules in Clearwater
Clearwater averages 0 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 2 at the median Florida station and 124 at the median U.S. station.
Freezing is rare here, so post depth is mostly about soil and fence height; ask how deep the posts go.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Call 811 a few days before digging so buried utility lines get marked; it's free.
| Nights at or below 32°F | 0 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Florida) | State-certified or locally registered contractor for structural work |
| Where to check a license | Florida DBPR (myfloridalicense.com) |
Local data checked October 2026 · Sources at the bottom of the page
Permits in Clearwater
Clearwater wants a current property survey with every fence or wall permit application, marked with exactly where the fence will run. Street-side fences over 30 inches that sit in a setback must be pulled 3 feet back from the street, with plantings on the street side, and the finished face always points outward.
Waterfront fence limits in Clearwater
City rule
On Clearwater properties next to the water, fences within 20 feet of the property line along the water, or within the required setback if that is greater, must be non-opaque and no more than 4 feet tall.
Confirm the required waterfront setback for your lot with Clearwater Planning before building.
Clearwater Community Development Code Sec. 3-804: Height requirements · Checked October 10, 2026
Chain-link fence limits in Clearwater
City rule
In Clearwater, chain-link fences are not allowed downtown or in front of the main building. On side and rear lines, chain link may be up to 48 inches tall, or 6 feet if clad in green or black vinyl, is not allowed along a side or rear line next to a public right-of-way, and must be screened along its full length by a continuous hedge or evergreen vine.
Other fence height and placement rules also apply; confirm with Clearwater Planning before building.
Clearwater Community Development Code Sec. 3-805: Chainlink fences · Checked October 10, 2026
How Clearwater compares with nearby cities
Labor rates
On a fence installation job in Clearwater, fence erectors earn a median $21.90 an hour. After insurance, payroll taxes and overhead, contractors bill about $44-$57 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Clearwater
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Clearwater, FL?
Fence installation cost in Clearwater, FL: $2,960-$5,010 (typical job: 150 linear ft). Each option in the price table above has its own range.
How does pay for construction laborers in the Tampa-St. Petersburg-Clearwater area compare with the national median?
Median pay for construction laborers in the Tampa-St. Petersburg-Clearwater, FL metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Pinellas County?
NOAA logged 38 thunderstorm wind reports of 58 mph or more in Pinellas County from 2016 to 2025.
Ready for your own number?
We have already loaded Clearwater prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://www.myclearwater.com/Business-Development/Permitting/Building-Permit-Fee-Schedule
- City of Clearwater, Fence Permit Application Checklist, checked 2026-10-26 (https://www.myclearwater.com/Business-Development/Permitting/06-Fence-Permit-Application-Checklist)
- Florida Building Code (state), checked 2026-10-26 (https://www.flsenate.gov/Laws/Statutes/2024/Chapter515)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- City of Clearwater Building Permit Fee Schedule (current as of Feb. 2, 2022). https://www.myclearwater.com/Business-Development/Permitting/Building-Permit-Fee-Schedule (retrieved 2026-10-26)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Florida DBPR (myfloridalicense.com) source
- NOAA Storm Events Database source
- Permit source — Clearwater
This estimate is NumeralQ's national baseline with a Clearwater adjustment of 1.08×. How we estimate