Fence installation cost by size
The biggest driver is size: 25 linear ft costs $720-$1,160 in Wilmington, while 400 linear ft costs $8,150-$13,630, about 1059% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 25 linear ft | $720-$1,160 |
| 50 linear ft | $1,210-$1,990 |
| 100 linear ft | $2,200-$3,650 |
| 150 linear ftMost common | $3,190-$5,310 |
| 200 linear ft | $4,180-$6,980 |
| 300 linear ft | $6,170-$10,310 |
| 400 linear ft | $8,150-$13,630 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Wilmington, farm wire or electric comes in about 70% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $3,190-$5,310).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $930-$1,660 | $4.69-$8.94 installed |
| Split rail (2-3 rail) | $1,670-$2,440 | $9.64-$14.11 installed |
| Chain link, 4 ft galvanized | $2,740-$3,990 | $16.78-$24.47 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,190-$5,310 | $19.81-$33.27 installed |
| Wood picket, 4 ft | $3,600-$5,070 | $22.53-$31.64 installed |
| Cedar privacy, 6 ft | $3,890-$5,930 | $24.46-$37.38 installed |
| Vinyl privacy, 6 ft | $4,060-$6,500 | $25.58-$41.17 installed |
| Steel ornamental, 4-5 ft | $4,630-$7,000 | $29.41-$44.51 installed |
| Aluminum ornamental, 4-5 ft | $4,700-$6,820 | $29.89-$43.32 installed |
| Composite privacy, 6 ft | $6,580-$10,220 | $42.37-$65.95 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Wilmington fence cost?
We have already loaded Wilmington prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 4 items your quote includes. The costliest line in Wilmington is "Drive gate (double)" at $1,510-$3,330 each.
- Walk gate$379-$699 / each
- Drive gate (double)$1,510-$3,330 / each
- Remove old fence$4.85-$6.31 / linear ft
- Sloped or rocky ground (extra per ft)$3.11-$5.02 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Wilmington different for this job
Wilmington homes and the local housing stock
Wilmington lots and fences
63% of Wilmington units are houses with their own lots, and 48% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
At the midpoint of the range above, a typical new fence costs about 1.8% of Wilmington's $231,400 median home value, the 29th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.
Neighborhood conservation district review in Wilmington
District/overlay only
Within a Wilmington neighborhood conservation district, some work that does not need a building permit is still reviewed, including exterior doors, windows and storm windows, painting or covering historically unpainted masonry, and front-yard fencing (and the street-side yard on corner lots). The planning department issues a certificate of appropriateness if the work fits the district design guidelines, and the certificate must be posted at the job site.
Which Wilmington areas are currently designated neighborhood conservation districts was not confirmed; check with the planning department.
Wilmington City Code Secs. 48-422 to 48-429: Neighborhood conservation districts · Checked October 10, 2026
Before you fence in Wilmington
NOAA's climate normals count about 92 freezing nights a year in Wilmington, against 87 at the median Delaware station and 124 at the median U.S. station.
In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 92 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Delaware) | Contractor registration with the Department of Labor (no competency license) |
| Where to check a license | Delaware Office of Contractor Registration |
Local data checked October 2026 · Sources at the bottom of the page
Fences and landscape changes in Wilmington historic districts
District/overlay only
Within a Wilmington city historic district, any fence of any height, style or material anywhere on the property, and any change to the existing terrain and the landscaping that results, must be reviewed by the Design Review and Preservation Commission before a building permit is issued, or before the work if no permit is needed. Berms, fill and similar changes are also subject to design review.
The commission may let staff review some fences under its policies; this applies only inside city historic districts.
Wilmington Code of Ordinances Sec. 48-418(c), (d): Standards · Checked October 10, 2026
Labor rates
For fence installation in Wilmington, contractors bill about $57-$74 per worker-hour for fence erectors, whose median pay is $28.62 an hour. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Wilmington
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Fence height rules in Wilmington
City rule
In Wilmington, Delaware, a solid fence (more than 80 percent solid) may be up to 6 feet high in residence districts and must follow the building setback line rules. An open fence (less than 80 percent solid) may be up to 8 feet high in residence districts, and one that is more than 25 percent but less than 80 percent solid must also follow the setback line rules. Barbed wire and razor wire are banned in residential districts.
Confirm setback lines for your lot with Wilmington Licenses and Inspections before building.
Wilmington City Code Sec. 48-475: Fences · Checked October 10, 2026
Frequently Asked Questions
How much does Fence Installation cost in Wilmington, DE?
Fence installation cost in Wilmington, DE: $3,190-$5,310 (typical job: 150 linear ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Philadelphia-Camden-Wilmington area compare with the national median?
Median pay for construction laborers in the Philadelphia-Camden-Wilmington, PA-NJ-DE-MD metro area is 24% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit New Castle County?
NOAA logged 202 thunderstorm wind reports of 58 mph or more in New Castle County from 2016 to 2025.
How much snow does Wilmington get in a typical year?
About 20.2 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Wilmington prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Delaware Office of Contractor Registration source
- NOAA Storm Events Database source
NumeralQ planning estimate. How we estimate