Siding replacement cost by size
The biggest driver is size: 1,000 sq ft of siding costs $5,620-$7,140 in Delaware, while 3,000 sq ft of siding costs $15,840-$19,830, about 180% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $5,620-$7,140 |
| 1,500 sq ft of sidingMost common | $8,180-$10,310 |
| 2,000 sq ft of siding | $10,730-$13,490 |
| 2,500 sq ft of siding | $13,280-$16,660 |
| 3,000 sq ft of siding | $15,840-$19,830 |
Siding replacement cost by material or type
In Delaware, vinyl lap siding is already the lowest-cost choice, at $8,180-$10,310; stepping up to brick veneer costs about 2.6 times as much ($18,780-$28,650).
What will your Delaware siding job cost?
We have already loaded Delaware prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Wilmington | $8,400-$10,600 | Wilmington |
State conditions
Local planning note for Delaware
Wilmington against the national picture
Wilmington is the only Delaware market on this site. BLS puts carpenters' median pay there at 2% above the U.S. median. Against a median home value of $231,400, the typical job is roughly 4.1% of the house. The city's own fee schedule puts the permit at about $180 for the standard job in the table.
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | FEMA strong-wind risk (county) | Typical job as share of median home value |
|---|---|---|---|---|
| Wilmington | +2% | $180 | Relatively High | 4.1% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for Delaware
Sales tax on a siding job in Delaware
Delaware has no sales tax, so nothing is added at the bottom of a contractor's bill. That keeps the price of a siding job closer to the quote than in most states.
Labor rates
On a siding replacement job in Delaware, carpenters earn a median $28.46 an hour, 2% below the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $57-$74 per worker-hour.
Before you sign in Delaware
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Local planning note for Delaware
How Delaware lien law affects a siding job
A mechanic's lien is a claim against your house by someone who worked on your siding job or supplied material for it and wasn't paid. Delaware caps liens at the unpaid contract balance, and on an owner-occupied home there is no lien at all if you paid in full in good faith and got a notarized paid-in-full certification or release from the contractor (25 Del. C. 2707).
Ask for that notarized certification at final payment. Advance waivers signed before work is done are void in Delaware (2706). Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.
Frequently Asked Questions
What does siding replacement cost in Delaware?
It isn't a contractor bid.
How does pay for carpenters in Wilmington compare with the national median?
In Wilmington, pay for carpenters is 2% above the national median (BLS, May 2025).
Do siding contractors need a license in Delaware?
Delaware's rule is contractor registration with the Department of Labor (no competency license). The Delaware Office of Contractor Registration has a free license lookup.
Does hail damage siding in Delaware?
Rarely. NOAA logged only 30 reports of one-inch-plus hail in Delaware from 2016 to 2025.
Is wind a concern for siding in Delaware?
NOAA logged 464 damaging-wind reports in Delaware over ten years, 43rd among the states.
Does Delaware's climate affect which siding to choose?
All of Delaware's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.
Ready for your own number?
We have already loaded Delaware prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- Delaware Division of Revenue, checked November 10, 2026 (https://revenue.delaware.gov/)
- Levelset, Delaware lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/delaware-lien-law-faqs/)
Installed: Vinyl lap siding