Insulation Cost in Washington D.C.: 2026 City-by-City Guide

Typical Washington D.C. job · 1,000 sq ft
$1,360-$2,2109% above U.S.

Plan on $1,360-$2,210 for insulating 1,000 sq ft in District of Columbia, 9% over the U.S. figure.

Your options

Budget
Radiant barrier (attic)
$980-$1,680
Most common
Blown-in fiberglass, attic (R-38)
$1,360-$2,210
Premium
Spray foam, closed-cell (2 in.)
$4,040-$5,690
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

Size moves the price more than anything else. In District of Columbia, going from 500 sq ft to 2,500 sq ft takes the job from $750-$1,220 to $3,170-$5,170, so have the size measured before comparing quotes.

SizeCost
500 sq ft$750-$1,220
1,000 sq ftMost common$1,360-$2,210
1,500 sq ft$1,960-$3,200
2,000 sq ft$2,570-$4,190
2,500 sq ft$3,170-$5,170
Cost by material

Insulation cost by material or type

The gap between options is wide: spray foam, closed-cell (2 in.) costs about 2.7 times as much as blown-in fiberglass, attic (R-38) in District of Columbia, and radiant barrier (attic) trims about 25%.

What will your District of Columbia insulation project cost?

We have already loaded District of Columbia prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Washington$1,190-$1,990Washington
State conditions

State conditions

Local planning note for Washington D.C.

Washington against the national picture

Washington is the only the District of Columbia market on this site. BLS puts insulation workers' median pay there at 7% below the U.S. median. A typical job comes to about 0.2% of Washington's median home value of $737,100.

CityPay for insulation workers vs U.S.Climate zone (county)Typical job as share of median home value
Washington-7%4A0.2%

Pay: BLS May 2025 metro median for the trade vs the U.S. median.

Labor

Labor rates

For insulation in District of Columbia, contractors bill about $59-$77 per worker-hour for insulation workers, whose median pay is $29.44 an hour. The difference covers insurance, taxes, overhead and profit.

Before you sign

Before you sign in Washington D.C.

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Local planning note for Washington D.C.

Protecting your the District of Columbia home from contractor liens

Anyone who works on an insulation job or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. In the District of Columbia, paying the contractor in full in good faith bars a sub's lien unless you were told in writing about the unpaid amount while you still owed money (D.C. Code 40-303.02(b)).

Read any notice of an unpaid sub before you pay the next draw. A notice of intent must be recorded within 90 days after completion and a copy sent to you within 5 business days (40-301.02). An insulation job is usually small, but the material distributor can still send a notice if the installer buys on account.

Common questions

Frequently Asked Questions

What does insulation cost in Washington, D.C.?

It isn't a contractor bid.

How does pay for insulation workers in Washington, D.C. compare with the national median?

In Washington, D.C., pay for insulation workers is 7% below the national median (BLS, May 2025).

Is there still a federal tax credit for insulation?

The 25C credit is gone for work placed in service after 2025 (IRS). Utility programs may still help.

Are there insulation rebates in D.C.?

Check two places: your utility, and the federal HEAR program, whiched in November 2024 in D.C. (NASEO, September 2026).

How old are most homes in D.C.?

69% of homes here predate 1980 (Census; U.S. 50%). Ask an installer to measure your current attic depth before quoting.

Do insulation installers need a license in D.C.?

Yes: Home Improvement Contractor license endorsement (bond and insurance required). You can confirm a license is active through the DC Department of Licensing and Consumer Protection.

Ready for your own number?

We have already loaded District of Columbia prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • Pacific Northwest National Laboratory for DOE, Guide to Determining Climate Zone by County, 2021 update (https://www.osti.gov/servlets/purl/1893981)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • Levelset, Washington, DC lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/washington-dc-lien-law-faqs/)

Installed: Blown-in fiberglass, attic (R-38)

$1,360-$2,210NumeralQ planning estimate
Get my estimate