Heat pump cost by size
The biggest driver is size: 1.5 tons costs $5,140-$8,030 in District of Columbia, while 5 tons costs $10,450-$17,490, about 112% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 1.5 tons | $5,140-$8,030 |
| 2 tons | $5,900-$9,380 |
| 2.5 tons | $6,650-$10,730 |
| 3 tonsMost common | $7,410-$12,080 |
| 3.5 tons | $8,170-$13,430 |
| 4 tons | $8,930-$14,780 |
| 5 tons | $10,450-$17,490 |
Heat pump cost by material or type
In District of Columbia, ductless mini-split, single zone comes in about 52% under air-source heat pump, ducted, and geothermal (ground-source) with loop runs roughly 2.9 times the price, so get each option you are weighing priced on the same quote (air-source heat pump, ducted here: $7,410-$12,080).
What will your District of Columbia heat pump cost?
We have already loaded District of Columbia prices for this heat pump installation estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Washington | $6,950-$11,490 | Washington |
State conditions
Local planning note for Washington D.C.
What sets Washington apart
Washington is the only the District of Columbia market on this site. BLS puts HVAC technicians' median pay there at 18% above the U.S. median. A typical job comes to about 1.3% of Washington's median home value of $737,100.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with electricity | Typical job as share of median home value |
|---|---|---|---|---|
| Washington | +18% | Not published | 47% | 1.3% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
On a heat pump installation job in District of Columbia, HVAC technicians earn a median $40.57 an hour. After insurance, payroll taxes and overhead, contractors bill about $81-$105 per worker-hour.
Before you sign in Washington D.C.
Get every quote to include
- equipment model, capacity, controls, and documented load calculation
- existing ductwork, electrical service, and any backup-heat scope
- removal, startup, commissioning, and operating instructions
- who checks and documents any required permits or inspections
Local planning note for Washington D.C.
How the District of Columbia lien law affects a heat pump install
A mechanic's lien is a claim against your house by someone who worked on your heat pump install or supplied material for it and wasn't paid. In the District of Columbia, paying the contractor in full in good faith bars a sub's lien unless you were told in writing about the unpaid amount while you still owed money (D.C. Code 40-303.02(b)).
Read any notice of an unpaid sub before you pay the next draw. A notice of intent must be recorded within 90 days after completion and a copy sent to you within 5 business days (40-301.02). For a heat pump install, expect any lien notice to come from the equipment distributor or from an electrician the installer brought in for the panel work.
Frequently Asked Questions
What does a heat pump cost in Washington, D.C.?
It isn't a contractor bid.
How does pay for HVAC technicians in Washington, D.C. compare with the national median?
In Washington, D.C., pay for HVAC technicians is 18% above the national median (BLS, May 2025).
Will a heat pump keep up in D.C. winters?
A standard heat pump handles winters across most of D.C.
How do D.C. electricity prices affect a heat pump?
At those prices, a heat pump costs more to run than gas.
What heat pump efficiency should I look for in D.C.?
Start from the DOE minimums, 7.5 HSPF2 and 14.3 SEER2, and compare quotes on both numbers.
Which refrigerant should a new heat pump use?
R-454B or R-32. EPA rules phased out R-410A in new home systems starting in 2025, so ask which refrigerant each quote uses.
Ready for your own number?
We have already loaded District of Columbia prices for this heat pump installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Levelset, Washington, DC lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/washington-dc-lien-law-faqs/)
Installed: Air-source heat pump, ducted