Fence installation cost by size
Find your size in the table. In Denver the range runs from $660-$1,080 for 25 linear ft to $7,700-$13,050 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $660-$1,080 |
| 50 linear ft | $1,130-$1,880 |
| 100 linear ft | $2,070-$3,470 |
| 150 linear ftMost common | $3,010-$5,070 |
| 200 linear ft | $3,950-$6,670 |
| 300 linear ft | $5,820-$9,860 |
| 400 linear ft | $7,700-$13,050 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
Material choice is the second big lever in Denver. Farm wire or electric runs $780-$1,470, about 72% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,370-$9,950.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $780-$1,470 | $3.93-$7.94 installed |
| Split rail (2-3 rail) | $1,500-$2,220 | $8.74-$12.93 installed |
| Chain link, 4 ft galvanized | $2,440-$3,600 | $15.00-$22.15 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,010-$5,070 | $18.78-$31.93 installed |
| Wood picket, 4 ft | $3,180-$4,520 | $19.94-$28.28 installed |
| Cedar privacy, 6 ft | $3,690-$5,680 | $23.37-$35.96 installed |
| Vinyl privacy, 6 ft | $3,870-$6,250 | $24.52-$39.79 installed |
| Steel ornamental, 4-5 ft | $4,320-$6,590 | $27.52-$42.05 installed |
| Aluminum ornamental, 4-5 ft | $4,550-$6,610 | $29.04-$42.22 installed |
| Composite privacy, 6 ft | $6,370-$9,950 | $41.22-$64.46 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Denver fence cost?
We have already loaded Denver prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 4 extras are where quotes most often grow. The largest single line in Denver is "Drive gate (double)" at $1,330-$3,100 each, so ask whether it is included.
- Walk gate$328-$633 / each
- Drive gate (double)$1,330-$3,100 / each
- Remove old fence$3.95-$5.13 / linear ft
- Sloped or rocky ground (extra per ft)$2.64-$4.40 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Denver different for this job
Denver homes and the local housing stock
A fence against the value of a Denver home
With 51% of units in multi-unit buildings, a fence in Denver often needs association approval, and HOA rules can set materials and colors.
High home values make the new fence a small slice in Denver: about 0.7% of the $616,000 median home, the 15th lowest among the 147 markets we price.
Local planning note for Denver
How Denver compares with nearby cities
Denver ties with Fort Collins at 0.7% of the median home value for a typical new fence.
Getting new fence bids from outside Denver? The Fort Collins and Colorado Springs pages below show the full price ranges there.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. |
|---|---|---|---|
| Denver | $4,040 | 0.7% | +1% (state figure) |
| Fort Collins | $4,040 | 0.7% | +1% (state figure) |
| Colorado Springs | $4,040 | 0.9% | +1% (state figure) |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Denver Fence Installation Pricing — 2026 Local Market
Fence installation cost in Denver, CO: $3,010-$5,070 (typical job: 150 linear ft).
Fence posts and rules in Denver
NOAA's climate normals count about 156 freezing nights a year in Denver, compared with medians of 178 across Colorado weather stations and 124 across U.S. stations.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Call 811 a few days before digging so buried utility lines get marked; it's free.
| Nights at or below 32°F | 156 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Colorado) | No state contractor license; cities and counties license contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Denver
Fence rules in Denver
| Rule | Value |
|---|---|
| Front yard | 4 ft in front of the street-facing facade |
| Back and side yard | 6 ft behind the facade |
| Permit needed | Zoning permit for fences over 4 ft (any fence on landmark or historic sites); building permit for post-hole fences over 8 ft and other fence types over 4 ft |
| Setback | At least 6 in back from the public sidewalk; not in the right-of-way |
Denver Zoning Code 10.5.5.
Fence height and permits in Denver
City rule
In Denver, outside industrial areas, fences may be up to 4 feet tall in front of the home's front facade and 6 feet behind it, and must stay out of the right-of-way and tree lawn, at least 6 inches back from the public sidewalk. Fences over 4 feet need a zoning permit, and post-hole fences need a building permit only over 8 feet. In a historic district, on a landmark or along a designated parkway, fences of any height need a permit.
Denver allows taller fences in some cases under specific criteria; confirm with the city before building.
City and County of Denver: Fences and Walls · Checked October 8, 2026
Fences and site work in Denver historic districts
District/overlay only
Within a Denver historic district or on an individual Denver landmark, front-yard fences may be no taller than 4 feet and must be more than 50 percent open, while rear-yard fences may be up to 6 feet and solid. Vinyl, PVC and chain-link fences are not allowed in most of these districts. Landmark Preservation also reviews hardscaping such as walkways, decks and patios, and all curb cuts, but does not review plantings.
La Alma Lincoln Park and Lower Downtown have their own guidelines, and properties on designated parkways also need Denver Parks and Recreation approval.
City and County of Denver: Fences, Retaining Walls, and Site Work (Landmark Design Review) · Checked October 8, 2026
How Denver compares with nearby cities
Labor rates
On a fence installation job in Denver, fence erectors earn a median $23.26 an hour, 1% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $47-$60 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Denver
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Denver, CO?
Fence installation cost in Denver, CO: $3,010-$5,070 (typical job: 150 linear ft). Each option in the price table above has its own range.
How does pay for construction laborers in the Denver-Aurora-Centennial area compare with the national median?
Median pay for construction laborers in the Denver-Aurora-Centennial, CO metro area is 3% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Denver County?
NOAA logged 41 thunderstorm wind reports of 58 mph or more in Denver County from 2016 to 2025.
Ready for your own number?
We have already loaded Denver prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- City and County of Denver, Fences and Walls, checked 2026-10-26 (https://www.denvergov.org/content/denvergov/en/denver-development-services/home-projects/outside-the-home/fence-requirements.html)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- NOAA Storm Events Database source
NumeralQ planning estimate. How we estimate