Colorado Springs Roof Repair Pricing — 2026 Local Market
2026 Market Overview
What the storm record shows for Colorado Springs roof repairs
The NOAA storm record for El Paso County and the 6 counties around it over 2016–2025 shows 240 damaging-wind reports and 1,281 large-hail reports.
Per 1,000 square miles that is 20.2 wind reports, against 16.2 across Colorado and 48.8 nationally.
82% of those reports fell between June and August.
Wind and hail leave different marks: lifted shingles and loose flashing after wind, bruising and granule loss after hail. A written repair scope should say which it found.
Storm record for El Paso County roofs| Damaging wind (58 mph+) in El Paso County, 2016–2025 | 57 reports |
|---|
| Large hail (1 in+) in El Paso County | 696 reports |
|---|
| FEMA strong-wind rating (county) | Relatively High |
|---|
| Months with the fewest reports (area) | Jan, Feb, Nov |
|---|
| Roofer license (Colorado) | Local only |
|---|
| Where to check a license | City or county building department |
|---|
Local data checked October 2026 · Sources at the bottom of the page
Colorado Springs homes and the local housing stock
How old Colorado Springs roofs are likely to be
69% of Colorado Springs's housing units are one-unit houses and 61% of homes are owner-occupied, so most roof repairs here are hired by individual owners. The typical Colorado Springs house went up in 1986, 2 years after the median for Denver and Fort Collins, which matters for roof repairs.
With half of Colorado Springs's homes 40 years old or more, repairs often land on aging roofs. Ask the roofer whether patching makes sense against InterNACHI's 20- to 30-year shingle life.
Local risks for this work in Colorado Springs
Hazard checks for this job in Colorado Springs
Colorado Springs sits in El Paso County, which carries a Relatively High rating for wildfire risk in FEMA's National Risk Index. Loose or missing shingles let embers in, NFPA notes, and embers can travel more than a mile ahead of a fire. A repair should close every gap, and eave vents should carry 1/8-inch metal mesh.