Insulation Cost in Phoenix, AZ: 2026 Local Guide

Typical Phoenix job · 1,000 sq ft
$1,150-$1,9406% below U.S.

Plan on $1,150-$1,940 for insulating 1,000 sq ft in Phoenix, about 6% less than the same job nationally.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$810-$1,450
Most common
Blown-in fiberglass, attic (R-38)
$1,150-$1,940
Premium
Spray foam, closed-cell (2 in.)
$3,510-$5,000
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

The biggest driver is size: 500 sq ft costs $630-$1,060 in Phoenix, while 2,500 sq ft costs $2,710-$4,580, about 331% more. Ask every contractor to quote the same measured size.

SizeCost
500 sq ft$630-$1,060
1,000 sq ftMost common$1,150-$1,940
1,500 sq ft$1,670-$2,820
2,000 sq ft$2,190-$3,700
2,500 sq ft$2,710-$4,580

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

Material choice is the second big lever in Phoenix. Radiant barrier (attic) runs $810-$1,450, about 27% under blown-in fiberglass, attic (R-38), while spray foam, closed-cell (2 in.) costs $3,510-$5,000.

TypeTypical jobInstalled
Radiant barrier (attic)$810-$1,450$0.70-$1.26 installed
Blown-in fiberglass, attic (R-38)Most common$1,150-$1,940$1.04-$1.76 installed
Blown-in cellulose, attic (R-38)Most common$1,150-$1,940$1.04-$1.76 installed
Fiberglass batts, walls (R-13)$1,330-$1,710$1.22-$1.52 installed
Rigid foam board (R-5 per inch, 2 in.)$1,640-$4,060$1.53-$3.87 installed
Fiberglass batts, attic floor (R-30)$2,000-$2,330$1.89-$2.15 installed
Spray foam, open-cell (3.5 in.)$2,020-$3,020$1.90-$2.84 installed
Dense-pack cellulose, existing walls$2,260-$3,140$2.15-$2.95 installed
Mineral wool batts (R-15)$2,510-$3,500$2.40-$3.32 installed
Spray foam, closed-cell (2 in.)$3,510-$5,000$3.40-$4.82 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Phoenix insulation project cost?

We have already loaded Phoenix prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 2 items your quote includes. The costliest line in Phoenix is "Air sealing (attic)" at $585-$899 for the job.

  • Remove old insulation$1.11-$1.51 / sq ft
  • Air sealing (attic)$585-$899 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Phoenix different for this job

Phoenix homes and the local housing stock

Phoenix homes and insulation

By room count, the median Phoenix home is smaller than most: 5.1 rooms against 5.5 for the other Arizona cities NumeralQ covers, which sets the scope of most insulation jobs. Phoenix insulation jobs happen in homes older than those in the other Arizona cities NumeralQ covers: half were built in 1985 or earlier, against 1991 there.

At the midpoint of the range, the insulation job equals roughly 0.4% of Phoenix's $420,700 median home value. 39 markets come out lower, so the price is small next to what homes here are worth.

Because the median home dates to 1985, a Phoenix attic usually has code-era insulation in it. Ask the installer to measure it, since topping up costs less than starting from bare joists.

Local planning note for Phoenix

Phoenix next to Scottsdale and Chandler

Set against what homes are worth, insulating an attic or walls costs Phoenix owners more than their neighbors: 0.4% of the median home value, compared with 0.2% in Scottsdale.

BLS counts Phoenix, Scottsdale and Chandler as one labor market for insulation workers, so a cheaper insulation job quote from the next city over reflects the contractor, not local pay.

CityTypical job (midpoint)Share of median home valuePay for insulation workers vs U.S.
Phoenix$1,5450.4%-14%
Scottsdale$1,5450.2%-14%
Chandler$1,5450.3%-14%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Local planning note for Phoenix

SRP pays toward attic insulation in Phoenix

If SRP is your Phoenix utility (APS serves much of the city too), you can get a rebate for bringing an under-R-19 attic up to R-38. Hire through SRP's insulation program: the installer has to be BPI-certified and Arizona-licensed, and air sealing is required alongside unless documented as unnecessary. Our copy came from a summary of SRP's page, so confirm the terms when you book.

Phoenix's climate and insulation

ENERGY STAR's attic recommendation for climate zone 2B, which covers Maricopa County, is R49 to R60.

A typical year in Phoenix brings 1,202 heating degree days and 3,963 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.

For comparison, the median station in Arizona records 2,602 heating and 1,977 cooling degree days, and the U.S. median is 5,483 and 848.

Arizona has no statewide residential energy code, so ENERGY STAR's level is the main reference point; ask for the installed R-value in writing.

Insulation in Phoenix at a glance
Climate zone (county)2B
ENERGY STAR attic levelR49 to R60
Heating / cooling degree days1,202 / 3,963
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Arizona)Registrar of Contractors license unless under $1,000 and no permit needed
Where to check a licenseArizona Registrar of Contractors

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Phoenix compares with nearby cities

Labor

Labor rates

On an insulation job in Phoenix, insulation workers earn a median $20.35 an hour. After insurance, payroll taxes and overhead, contractors bill about $41-$53 per worker-hour.

Insulation Workers, Floor, Ceiling, and Wall

$20.35/hrMedian pay
$41-$53/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Phoenix

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Phoenix

Insulation installers per home in Maricopa County

For insulating an attic or walls in Phoenix, the local pool is 326 drywall and insulation contractors in Maricopa County (Census, 2023): 1.7 per 10,000 homes, above the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

A crowded field helps Phoenix homeowners on price and timing for an insulation job, but it also draws more fly-by-night operators, so check licensing and reviews before you sign. Chandler, Gilbert, Mesa and Scottsdale share the same county figure.

Common questions

Frequently Asked Questions

How much does Insulation cost in Phoenix, AZ?

Insulation cost in Phoenix, AZ: $1,150-$1,940 (typical job: 1,000 sq ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Phoenix-Mesa-Chandler area compare with the national median?

Median pay for construction laborers in the Phoenix-Mesa-Chandler, AZ metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Phoenix?

About 42% were built before 1980, according to the Census Bureau, against 29% across Arizona and 50% nationally.

How do most Phoenix homes heat?

About 23% heat mainly with piped gas and 74% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Phoenix prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • Insulation rebate - SRP, checked October 11, 2026 (https://www.srpnet.com/energy-savings-rebates/home/rebates/insulation)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

NumeralQ planning estimate. How we estimate

$1,150-$1,940NumeralQ planning estimate
Get my estimate