Fence installation cost by size
Find your size in the table. In Phoenix the range runs from $650-$1,070 for 25 linear ft to $7,620-$12,950 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $650-$1,070 |
| 50 linear ft | $1,110-$1,860 |
| 100 linear ft | $2,040-$3,440 |
| 150 linear ftMost common | $2,970-$5,030 |
| 200 linear ft | $3,900-$6,610 |
| 300 linear ft | $5,760-$9,780 |
| 400 linear ft | $7,620-$12,950 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Phoenix, farm wire or electric comes in about 73% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,970-$5,030).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $750-$1,440 | $3.79-$7.77 installed |
| Split rail (2-3 rail) | $1,470-$2,180 | $8.58-$12.72 installed |
| Chain link, 4 ft galvanized | $2,390-$3,530 | $14.68-$21.73 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,970-$5,030 | $18.59-$31.69 installed |
| Wood picket, 4 ft | $3,100-$4,420 | $19.47-$27.67 installed |
| Cedar privacy, 6 ft | $3,660-$5,630 | $23.17-$35.71 installed |
| Vinyl privacy, 6 ft | $3,830-$6,210 | $24.33-$39.54 installed |
| Steel ornamental, 4-5 ft | $4,260-$6,520 | $27.18-$41.61 installed |
| Aluminum ornamental, 4-5 ft | $4,520-$6,580 | $28.89-$42.02 installed |
| Composite privacy, 6 ft | $6,340-$9,900 | $41.02-$64.19 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Phoenix fence cost?
We have already loaded Phoenix prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 4 items your quote includes. The costliest line in Phoenix is "Drive gate (double)" at $1,300-$3,060 each.
- Walk gate$319-$621 / each
- Drive gate (double)$1,300-$3,060 / each
- Remove old fence$3.78-$4.92 / linear ft
- Sloped or rocky ground (extra per ft)$2.55-$4.29 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Phoenix different for this job
Phoenix homes and the local housing stock
Who builds fences in Phoenix
65% of Phoenix units are houses with their own lots, and 57% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
Against the $420,700 median home value, a typical new fence in Phoenix costs about 1.0% of the house. That ranks 97th of 147 markets, with 1st the most expensive relative to home values.
Local planning note for Phoenix
Phoenix, Scottsdale and Chandler side by side
Set against what homes are worth, fencing a yard costs Phoenix owners more than their neighbors: 1.0% of the median home value, compared with 0.5% in Scottsdale.
BLS counts Phoenix, Scottsdale and Chandler as one labor market for fence installers, so a cheaper new fence quote from the next city over reflects the contractor, not local pay.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| Phoenix | $4,000 | 1.0% | -3% | Not published |
| Scottsdale | $4,000 | 0.5% | -3% | $270 |
| Chandler | $4,000 | 0.8% | -3% | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Exterior work in Phoenix historic preservation overlays
District/overlay only
Within a Phoenix HP or HP-L historic preservation overlay, exterior changes to a building or structure need review by the Historic Preservation Office before the construction permit. Minor work clearly within design guidelines, such as walls, fences or rear patio covers, can get a staff Certificate of No Effect, while complex or street-visible work needs a Certificate of Appropriateness with a public hearing. Routine maintenance such as painting and interior-only work are excluded.
This applies only to properties with HP or HP-L zoning, not National Register-only listings, and staff decide how specific work such as window replacement is treated.
City of Phoenix Historic Preservation Office: Historic Preservation FAQ · Checked October 8, 2026
Local risks for this work in Phoenix
Hazard checks for this job in Phoenix
For Phoenix, FEMA's National Risk Index puts wildfire risk in Maricopa County at Relatively High. NFPA counts anything attached to the house as part of the home in a wildfire, and the first 5 feet should not burn. A metal or masonry section where the fence meets the house keeps a wood fence from carrying fire to the wall.
Local rules and records for Phoenix
Fence rules in Phoenix
| Rule | Value |
|---|---|
| Front yard | 40 in in required front setback (older docs say 3 ft) |
| Back and side yard | 6 ft (side/rear) |
| Permit needed | permit for fences and walls over 3 ft; over 7 ft needs structural design |
| Setback | 3 ft limit in visibility triangles at driveways and intersections |
Taller needs variance
Before you fence in Phoenix
Phoenix averages 3 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 59 at the median Arizona station and 124 at the median U.S. station.
Freezing is rare here, so post depth is mostly about soil and fence height; ask how deep the posts go.
The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 3 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Arizona) | Registrar of Contractors license unless under $1,000 and no permit needed |
| Where to check a license | Arizona Registrar of Contractors |
Local data checked October 2026 · Sources at the bottom of the page
Permits in Phoenix
In Phoenix the cutoff is 3 feet. According to the city's Planning & Development Department, a fence up to that height needs nothing, one up to 6 feet gets a simple permit that checks zoning and drainage, and anything taller has to meet the full building code.
How Phoenix compares with nearby cities
Labor rates
On a fence installation job in Phoenix, fence erectors earn a median $22.30 an hour, 3% below the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $45-$58 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Phoenix
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Phoenix, AZ?
Fence installation cost in Phoenix, AZ: $2,970-$5,030 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Phoenix-Mesa-Chandler area compare with the national median?
Median pay for construction laborers in the Phoenix-Mesa-Chandler, AZ metro area is 3% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Maricopa County?
NOAA logged 602 thunderstorm wind reports of 58 mph or more in Maricopa County from 2016 to 2025.
Ready for your own number?
We have already loaded Phoenix prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- City of Phoenix - Residential Fences, checked 2026-10-26 (https://www.phoenix.gov/content/dam/phoenix/pddsite/documents/planning-zoning-zoning-rezoning/residential-fences.pdf)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- NFPA, Preparing homes for wildfire: the immediate, intermediate and extended zones, checked 2026-11-10 (https://www.nfpa.org/education-and-research/wildfire/preparing-homes-for-wildfire)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- Arizona Registrar of Contractors source
- NOAA Storm Events Database source
- Permit source — Phoenix
NumeralQ planning estimate. How we estimate