Deck & Patio Cost in Huntsville, AL: 2026 Local Guide

Typical Huntsville job · 320 sq ft
$4,790-$6,72010% below U.S.

Plan on $4,790-$6,720 for a 320 sq ft deck or patio in Huntsville, about 10% less than the same job nationally.

For comparable written proposals, confirm dimensions and elevation, footing and attachment details, decking and guard scope, and grading or drainage work.

Your options

Budget
Patio: plain concrete
$2,220-$2,960
Most common
Deck: pressure-treated wood
$4,790-$6,720
Premium
Deck: ipe hardwood
$11,210-$16,310
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

Size moves the price more than anything else. In Huntsville, going from 10 x 10 ft to 20 x 30 ft takes the job from $1,500-$2,100 to $8,990-$12,590, so have the size measured before comparing quotes.

SizeCost
10 x 10 ft$1,500-$2,100
12 x 12 ft$2,160-$3,020
12 x 16 ft$2,880-$4,030
16 x 16 ft$3,830-$5,370
16 x 20 ftMost common$4,790-$6,720
20 x 20 ft$5,990-$8,400
20 x 30 ft$8,990-$12,590

Installed: Deck: pressure-treated wood

Cost by material

Deck or patio cost by material or type

Material choice is the second big lever in Huntsville. Patio: plain concrete runs $2,220-$2,960, about 55% under deck: pressure-treated wood, while deck: ipe hardwood costs $11,210-$16,310.

TypeTypical jobInstalled
Patio: plain concrete$2,220-$2,960$6.95-$9.26 installed
Patio: gravel$2,560-$3,620$8.01-$11.30 installed
Patio: stamped concrete$3,890-$5,210$12.16-$16.28 installed
Patio: brick pavers$3,900-$5,410$12.19-$16.92 installed
Patio: concrete pavers$4,190-$5,830$13.09-$18.22 installed
Patio: flagstone$4,610-$11,860$14.42-$37.07 installed
Deck: pressure-treated woodMost common$4,790-$6,720$14.98-$20.99 installed
Patio: slate$5,130-$8,370$16.04-$26.16 installed
Show 9 more options
TypeTypical jobInstalled
Patio: porcelain pavers$5,160-$8,130$16.14-$25.41 installed
Patio: travertine pavers$5,680-$7,630$17.75-$23.83 installed
Deck: cedar$5,790-$8,580$18.10-$26.82 installed
Patio: bluestone$5,910-$9,660$18.46-$30.19 installed
Deck: redwood$7,920-$10,990$24.76-$34.33 installed
Deck: composite$8,630-$12,770$26.96-$39.91 installed
Deck: PVC$9,330-$12,410$29.16-$38.79 installed
Deck: aluminum$9,440-$12,510$29.50-$39.09 installed
Deck: ipe hardwood$11,210-$16,310$35.04-$50.96 installed

Materials include waste and contractor markup. Typical job: 320 sq ft

What will your Huntsville deck or patio cost?

We have already loaded Huntsville prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 8 extras are where quotes most often grow. The largest single line in Huntsville is "Pergola or cover structure" at $3,920-$7,460 for the job, so ask whether it is included.

  • Railing: wood$30.01-$41.42 / linear ft
  • Railing: aluminum or steel$46.17-$81.15 / linear ft
  • Railing: composite$87-$155 / linear ft
  • Railing: cable$106-$179 / linear ft
  • Railing: glass$126-$220 / linear ft
  • Stairs (per step, wood, pre-cut stringers)$95-$170 / step
  • Footing (poured concrete)$178-$329 / each
  • Pergola or cover structure$3,920-$7,460 / job
Show material-only prices
Add-onMaterials
Railing: wood$12.07-$18.11 / linear ft
Railing: aluminum or steel$30.19-$60.38 / linear ft
Railing: composite$60-$121 / linear ft
Railing: cable$85-$151 / linear ft
Railing: glass$97-$181 / linear ft
Stairs (per step, wood, pre-cut stringers)$33.81-$90.56 / step
Footing (poured concrete)$57-$173 / each
Pergola or cover structure$1,720-$4,600 / job

Installed price per unit

Local conditions

What makes Huntsville different for this job

Huntsville homes and the local housing stock

Huntsville homes and outdoor projects

In Huntsville, a city of mostly houses (66% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

A typical deck or patio at the midpoint price equals roughly 2.0% of what the median Huntsville home is worth ($293,600), 66th of the 147 markets NumeralQ covers.

Local planning note for Huntsville

How Huntsville compares with nearby cities

Next to Birmingham and Montgomery, a deck or patio is the lightest lift in Huntsville relative to home value, at 2.0% of the median home.

For a deck or patio in Huntsville or next door, pay for carpenters is where the three split most: Birmingham is 17% below the U.S. median and Montgomery is 22% below the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.

Huntsville has the lowest permit fee of the three for a deck or patio: $82 for the standard job, against $142 in Birmingham and $112 in Montgomery.

CityTypical job (midpoint)Share of median home valuePay for carpenters vs U.S.Permit for a $15,000 remodel
Huntsville$5,7552.0%-19%$82
Birmingham$5,8353.7%-17%$142
Montgomery$5,6703.5%-22%$112

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Building a deck in Huntsville

NOAA's climate normals count about 56 freezing nights a year in Huntsville, against 53 at the median Alabama station and 124 at the median U.S. station.

Ask the building department for Huntsville's frost depth. The model code requires deck footings to sit below it, and at least 12 inches down.

The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.

The station also averages 54.3 inches of rain and melted snow a year (U.S. median: 37.5).

Decks in Huntsville at a glance
Nights at or below 32°F56
Yearly precipitation54.3 in
Climate zone (county)3A
Contractor license (Alabama)Home Builders Licensure Board license for residential jobs over $10,000
Where to check a licenseAlabama Home Builders Licensure Board

Local data checked October 2026 · Sources at the bottom of the page

Work exempt from permits in Huntsville

In Huntsville, the city's adoption of the 2018 International Residential Code deletes the model code's list of work exempt from permits. Permits apply to alterations, repairs and additions, except a repair where the reasonable cost of materials and labor is $250 or less and no structural work is involved.

City staff practice may narrow how this is applied to some items, so confirm with the Huntsville Inspection Division before starting.

Huntsville City Code Sec. 7-192: residential code amendments (Ord. 21-1006) · Checked October 10, 2026

Paving limits in Huntsville's Slope Development District

In Huntsville’s Slope Development District, area under a roof counts toward the impervious-cover cap: 15% of lot area in the lower-slope zone and 10% in the upper-slope zone, with higher caps only in qualifying subdivisions. The cited rule does not state whether unroofed decks count.

Some subdivisions have higher optional caps, lots recorded before 1996 are excluded, and the code does not say whether an unroofed deck counts as impervious cover.

Huntsville Zoning Ordinance Secs. 65.4 and 65.5: Slope Development District · Checked October 10, 2026

Exterior work in Huntsville historic districts

Within the Huntsville Historic Preservation District, which includes the Twickenham, Old Town, Alabama A&M University and Five Points districts, no building or structure may be built, altered, restored or renovated unless the Historic Preservation Commission has issued a certificate of appropriateness.

Commission guidelines and any staff-level approvals were not reviewed; ask the city which projects need a full commission review.

Huntsville City Code Sec. 10-63: historic district subdivisions and construction · Checked October 10, 2026

Nearby pricing

How Huntsville compares with nearby cities

Labor

Labor rates

For deck or patio in Huntsville, contractors bill about $47-$61 per worker-hour for carpenters, whose median pay is $23.54 an hour. The difference covers insurance, taxes, overhead and profit.

Carpenters

$23.54/hrMedian pay
$47-$61/hrBilled rate

Cement Masons and Concrete Finishers

$22.67/hrMedian pay
$45-$59/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Huntsville

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration
Common questions

Frequently Asked Questions

How much does Deck & Patio cost in Huntsville, AL?

Deck or patio cost in Huntsville, AL: $4,790-$6,720 (typical job: 320 sq ft). Each option in the price table above has its own range.

How does pay for carpenters in the Huntsville area compare with the national median?

Median pay for carpenters in the Huntsville, AL metro area is 19% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Madison County?

NOAA logged 293 thunderstorm wind reports of 58 mph or more in Madison County from 2016 to 2025.

How much snow does Huntsville get in a typical year?

About 2.4 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Huntsville prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • https://www.huntsvilleal.gov/development/building-construction/building-license-permits/permit-costs/
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026

NumeralQ planning estimate. How we estimate

$4,790-$6,720NumeralQ planning estimate
Get my estimate